Widescreen Gaming Forum

I have had the same problem in the past. Sounds like PowerDesk is overwriting the custom profiel you've set up.

Head over to http://www.widescreengamingforum.com/forum/viewtopic.php?f=59&t=17827 and follow the instructions at step #5.

Hope it helps

I've been through a few different variations of this problem. With Post/Boot screens on the left or center or right monitor only, left and right monitors, center and right monitors, and stretched across all three.

The only way that I managed to fix this was the following:

1. Change the ...

1. DO YOU CURRENTLY HAVE 5040 WORKING? YES
2. OS - Windows7 Ultimate x64
3. Matrox driver version - GXM 2_06_00_026
4. Firmware version - v2.3.40.t6.56
5. Graphics driver make & version - Nvidia 191.07 64Bit Version
6. Monitor make & version - 3x Samsung 226BW
7. CPU make/model - Intel ...

...My HP LP3065s measure 3x 27.2W x 9.5 x 23.2H inches...
... does the 14.5" cylinder detach from the base or is it welded on?...

The central mounting pole attaches to the base via a grub screw so can be swapped out for another with a suitable O.D.

The maximum monitor width according to ...

Np. I needed the part numbers to explicitly spell out to a local online retailer exactly what I wanted them to special order. (The long extension arms and the 28" central mounting pole.)

I'm more thinking about future upgrades rather than right now i.e. if I buy it now it won't have gone out ...

If you're after the upgrade kit, for your existing DS100, that will allow you to use 3x24" monitors out of the box you need to order the Long Crossbar Extender Kit with part #97-447-200.

This kit will allow you to upgrade a dual monitor DS100 stand (#33-322-200) or triple monitor DS100 stand ...

...Thing is I see your bezels meet directly end to end and I really like to have my outside monitors slightly behind the front one to decrease bezel size and bring the screens closer. I guess if I get a mount like this that you cant do that? Nevermind I see those mounts have tilt so it should let ...

Have a look at the DS-100 from ergotron, they seem to indicate that if you get the triple monitor version with 55" crossbar you can fit three monitors up to 622mm wide with the long crossbar. With the Dell 24" monitors I checked width vary from 560mm to 585mm depending on bezels so you should be ...

:arrow: Stopping Powerdesk SE (Matrox GXM utility) from removing modes on every boot
First post, last part ;)

Thanks for pointing that out Scav.

Currently managed to set up a 5040x1050@59Hz setting on Vista x64 using the following driver/firmware versions:

GXM 2_05_00_020
Nvidia ...

Just had my custom resolution nerfed by my system, it was running fine and then after a week it just mysteriously disappeared so now I'm back to 5040x1050@57Hz with a nag screen. I'm guessing it's the Matrox GXM that is deleting or overwriting it.

Does anyone have an idea on how to disable this ...

Ok so colour me excited... after months of being XP and within days of me getting a free copy of Win7, the latest NV drivers allow me to get 5040. And according to Thales he can tun DX10! Not tested here just installed it and this is the first thing I have done.

ATi releases EF, very popular ...

ROFL, try Made In New Zealand!

Isn't that code for made in Taiwan, China, Sweatshop

[quote]ATI has a new page up for EyeFinity.

http://www.amd.com/us/products/technologies/eyefinity/Pages/eyefinity.aspx
Hmmmm...that page seems to contradict what I was told about display symmetry. :?

It seems to be that all the monitors that form an SLS group must be in the same ...

This looks fantastic.

I can see that portrait and landscape mode are supported which is great but these have all been shown with identical monitors all setup in the same orientation. I'm yet to see anything on mixed modes being used i.e. something like this.

22" Portrait>22" Portrait ...

Without downgrading your drivers.... not sure. A slight downgrade to 190.56 might help though. I tried the newer 190.62 drivers and could not get them to work.

A few people (me included) have had success with Nvidia 190.56, GXM 2.05.00.020 and TripleHead2Go Firmware 2.3.40

Shoot over to ...

Hi Guys,

I was forced to do a fresh install of Windows Vista x64 due to funky stuff happening. I was going to go back to the setup that I knew let me "trick" my monitors into working at 5040x1050@60hz from before with the following driver versions Nvidia 180.48 & GXM 2.4.0.11.

Thought I'd ...

"4. Change GDI Refresh to 60 (this is the big change thanks to Nigel, used to be 57 as per other threads), bits per pixel 32.
5. Then click on 'Advanced'.
6. In the Back-end Parameters, Timing Standard drop-down box and change it to 'CVT Reduced Blank'.
7. Then select 'Manual' from the ...

Do you have to drill holes into the wall for the monitor mounts? I live in an apartment so that would probably be a no-no.

Only if they are Wall Mounted arms or mounts. The ones we have been discussing are freestanding on your desk.

For you too fit the 22" do you have to tuck them behind or is that because you wanted it that way?

They will also fit right next to each other, I just tucked the outside monitors behind the central one to minimize bezel and turn them a couple more degrees towards me.

The 226BW monitors ...

Hi Roman,

I've got the Ergotron DS100 Triple Stand and find it pretty awesome although it could use a longer mounting pole or lift stand like the LX.

I've got three 22" Samsung 226Bw's hung on it at the moment, these technically shouldn't fit on it if you pay attention to the specs on the ...