Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Gaming on 21:9 and ultra-wide single screen monitors
Zeruel
Posts: 3
Joined: 25 Jan 2019, 11:14

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Zeruel »

Hi any chance of a 32:10 3840x1200 patch?
User avatar
jackfuste
Insiders
Insiders
Posts: 521
Joined: 19 Dec 2011, 16:03

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by jackfuste »

Evil_Raven wrote:vignette removal does not work =(

problem with the release version of the game
and is it possible to remove the black bars at least in some of the cutscenes are on the engine ? some cutscenes are made on the engine and it is noticeable when switching from cutscene to the game.

I don't have the release version, but I hope this patches will work.

Apply patch to re2.exe

admiraltennek
Posts: 8
Joined: 25 Jan 2019, 10:26

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by admiraltennek »

The sharpening removal patch works perfectly, but the vignette one causes this texture / lighting glitch to happen:
Attachments
20190125030343_1.jpg
20190125030343_1.jpg (361.8 KiB) Viewed 19922 times
Synthesthesia
Posts: 5
Joined: 25 Jan 2019, 02:05

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Synthesthesia »

jackfuste wrote:
Evil_Raven wrote:vignette removal does not work =(

problem with the release version of the game
and is it possible to remove the black bars at least in some of the cutscenes are on the engine ? some cutscenes are made on the engine and it is noticeable when switching from cutscene to the game.

I don't have the release version, but I hope this patches will work.

Apply patch to re2.exe

  • re2_release_v1.7z

    Unlocked FOV for aspect ratio higher 21:9
    Black bars removed from cut-scenes
    Black bars removed for aspect ratio below 16:9

  • re2_release_disable_vignette.7z

  • re2_release_disable_sharpening.7z


Thank you so much for the cutscene fix it works!
raspberryfluor
Posts: 2
Joined: 10 Jan 2019, 16:56

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by raspberryfluor »

Really hope there is a cutscene fix. Very annoying with 21:9.

Really need too figure this out myself. I hate relying on other people and almost begging for a feature that frankly should be there.

Edit: I am dumb. The fix above from Jack works. Thank you SO much.
User avatar
Evil_Raven
Posts: 88
Joined: 25 Jun 2018, 08:06
Contact:

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Evil_Raven »

jackfuste wrote:
Evil_Raven wrote:vignette removal does not work =(

problem with the release version of the game
and is it possible to remove the black bars at least in some of the cutscenes are on the engine ? some cutscenes are made on the engine and it is noticeable when switching from cutscene to the game.

I don't have the release version, but I hope this patches will work.

Apply patch to re2.exe

  • re2_release_v1.7z

    Unlocked FOV for aspect ratio higher 21:9
    Black bars removed from cut-scenes
    Black bars removed for aspect ratio below 16:9

  • re2_release_disable_vignette.7z

  • re2_release_disable_sharpening.7z

thank you! The developers of RESIDENT EVIL 2 is not capable of it, but thanks to you we can enjoy the game
sorry for my english I am not native speaker
Steam Profile https://steamcommunity.com/profiles/76561198066031175
itchytasty
Posts: 2
Joined: 25 Jan 2019, 03:11

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by itchytasty »

Cutscene no black bars is perfect. Hope to see disabled vignette (during normal gameplay)
User avatar
susahamat
Posts: 530
Joined: 20 Sep 2015, 00:58

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by susahamat »

i'll update trainer vignette removal on monday next week

EDIT : could anyone confirm this fov changer by jim still working https://twitter.com/jim2point0/status/1 ... 9012367360 ?
if you supporting what I do, buy me a coffee here https://ko-fi.com/kevinsesario or instead direct to paypal.me/kevinsesario . EMAIL:mailto:?subject=&body=, Steam: https://steamcommunity.com/id/sesariok
User avatar
Funkengreuven
I Donated
I Donated
Posts: 92
Joined: 30 May 2012, 03:56

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Funkengreuven »

jackfuste wrote:Apply this patch to re2.exe
re2_32x9.7z

or using Hex-editor replace the following bytes in re2.exe:
FD FF A7 3F 00 00 00 00 => FD FF A7 40 00 00 00 00


Jack, what would be the values or can you make an .EXE for Nvidia Surround resolution of 7680x1440? I tried the 32:9 you listed, but it didn't make any difference for me & I don't know what the values should be for my resolution... Thanks!
| i7 3930K | 16GB Mushkin Redline 2133MHz | ASUS Rampage IV Formula | EVGA 2080ti SC ULTRA | EVGA Supernova 1200W PS | 2x Samsung EVO 500GB SSD RAID 0 | 2x IBM 520 SSD 240GB | Rosewill Blackhawk | 3x Acer Predator G-Sync 144MHz @ 7680x1440 |
User avatar
Funkengreuven
I Donated
I Donated
Posts: 92
Joined: 30 May 2012, 03:56

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Funkengreuven »

Funkengreuven wrote:
jackfuste wrote:Apply this patch to re2.exe
The attachment re2_32x9.7z is no longer available

or using Hex-editor replace the following bytes in re2.exe:
FD FF A7 3F 00 00 00 00 => FD FF A7 40 00 00 00 00


Jack, what would be the values or can you make an .EXE for Nvidia Surround resolution of 7680x1440? I tried the 32:9 you listed, but it didn't make any difference for me & I don't know what the values should be for my resolution... Thanks!


Never mind, I found the patch tool, but this is what I see in Nvidia Surround when I use it. Is this just the game and nothing can be done about it? I appreciate the effort, but roughly half the available screen space is black as the graphics just fade out on the sides. I attached a picture...
Attachments
883710_20190125205932_1.png
883710_20190125205932_1.png (3.45 MiB) Viewed 19401 times
| i7 3930K | 16GB Mushkin Redline 2133MHz | ASUS Rampage IV Formula | EVGA 2080ti SC ULTRA | EVGA Supernova 1200W PS | 2x Samsung EVO 500GB SSD RAID 0 | 2x IBM 520 SSD 240GB | Rosewill Blackhawk | 3x Acer Predator G-Sync 144MHz @ 7680x1440 |
Amon Amarth
I Donated
I Donated
Posts: 513
Joined: 18 Jul 2007, 04:19

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Amon Amarth »

Nice, thanks Jack! Not sure if this was taken care of yet, as I've yet to play the full game, but the only thing missing seems to be a centered HUD for 48:10, 48:9, and 21:9 setups. Other than that, it seems just about already done on our side!
User avatar
TheWitcher
Posts: 38
Joined: 19 May 2015, 03:52

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by TheWitcher »

Yeah we need a centered hub for 21:9 setups please!

Also vignette removal doesn't seem to be doing the trick!
User avatar
Funkengreuven
I Donated
I Donated
Posts: 92
Joined: 30 May 2012, 03:56

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Funkengreuven »

Is the attached picture normal??? I used the RE7 patch tool for resolutions over 21:9 found in this thread by Jack, but it doesn't seem to be working correctly or else maybe it's just the game engine and it's the best it can do. In any case, I'm playing in Nvidia surround @ 7680x1440 and as you can see nearly half the real estate is not being used. Is this right, or is there something else I can do to make it fill the screen more fully? Thanks in advance for any help you can provide!
Attachments
883710_20190125205932_1.png
883710_20190125205932_1.png (3.45 MiB) Viewed 7349 times
| i7 3930K | 16GB Mushkin Redline 2133MHz | ASUS Rampage IV Formula | EVGA 2080ti SC ULTRA | EVGA Supernova 1200W PS | 2x Samsung EVO 500GB SSD RAID 0 | 2x IBM 520 SSD 240GB | Rosewill Blackhawk | 3x Acer Predator G-Sync 144MHz @ 7680x1440 |
User avatar
SAMI
Insiders
Insiders
Posts: 20
Joined: 19 Feb 2016, 13:35
Location: Earth

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by SAMI »

Black bar removal works in the full game, right?

So the only thing that's left to fix is the vignette?

I haven't bought the full game yet so i can't test it yet. But it's really concerning me now whether I should really buy the game or not.


Edit: Upon further testing the demo I realized that the lighting bug caused by removing vignette is present in the demo too. That's very unfortunate. Looks like removing the hex code for vignette removes some other effects then. Now the only hope for proper fix is by hoping RE Engine can be modded [RE7 is still unmoddable] and then removing the vignette texture separately.


The vignette is bothersome with even 16:9 aspect ratio. The game is already too dark and the vignette makes it more atrocious.
Noob & Crazy
Bob Saget
Posts: 1
Joined: 26 Jan 2019, 17:37

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Bob Saget »

jackfuste wrote:
re2_release_disable_vignette.7z




I made an account here just to tell you that it works.
I am very thankful for the fix you did.
I made a forum post about it on Steam - someone linked me to a demo fix - and that led me here.
Thank you, again.
gr3y5had0w
Posts: 4
Joined: 27 Jan 2019, 03:18

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by gr3y5had0w »

susahamat wrote:i'll update trainer vignette removal on monday next week


I hope there is a working fix for the horrible vignette, without the greyish areas. I'll check out the new trainer on monday as soon as it's online.
User avatar
TheWitcher
Posts: 38
Joined: 19 May 2015, 03:52

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by TheWitcher »

Bob Saget wrote:
jackfuste wrote:
re2_release_disable_vignette.7z




I made an account here just to tell you that it works.
I am very thankful for the fix you did.
I made a forum post about it on Steam - someone linked me to a demo fix - and that led me here.
Thank you, again.



Uhhh...it doesn't work for a lot of us. I think you need to open your eyes and see the grey areas that happen as a result of vignette removal.
Ozbaab
Posts: 7
Joined: 28 Oct 2016, 20:14

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by Ozbaab »

jackfuste wrote:
Evil_Raven wrote:vignette removal does not work =(

problem with the release version of the game
and is it possible to remove the black bars at least in some of the cutscenes are on the engine ? some cutscenes are made on the engine and it is noticeable when switching from cutscene to the game.

I don't have the release version, but I hope this patches will work.

Apply patch to re2.exe

  • re2_release_v1.7z

    Unlocked FOV for aspect ratio higher 21:9
    Black bars removed from cut-scenes
    Black bars removed for aspect ratio below 16:9

  • re2_release_disable_vignette.7z

  • re2_release_disable_sharpening.7z


Thanks a ton!
One problem tho.. The menu sounds have disappeared after applying the patch..
Anyone else?

Ok strange. I restarted the game multiple times and it didn't fix it. When I started the re2.exe file directly instead of through Steam I now have menu sounds.
User avatar
susahamat
Posts: 530
Joined: 20 Sep 2015, 00:58

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by susahamat »

gr3y5had0w wrote:
susahamat wrote:i'll update trainer vignette removal on monday next week


I hope there is a working fix for the horrible vignette, without the greyish areas. I'll check out the new trainer on monday as soon as it's online.

i am afraid not, still doesn't fixed that graphical issues.

===RE Remake Vignette Removal Trainer===
This Release to switch the Vignette to On/off Realtime during In-Gameplay,Real Time Cutscenes. For Demo release visit this link
RE2R_VignetteRemoval.jpg
RE2R_VignetteRemoval.jpg (44.48 KiB) Viewed 6869 times

STEAM(DayOneVersion)
RE2R_VignetteRemoval.7z
(3.89 MiB) Downloaded 1572 times
(Compatible w/ Jackfuste Fix)

Known Issues
1.Broken Lighting has broken in some area making graphical issues greyish effect on assets w/ vignette disabled. (Workaround: just switch to default for a moment)


i would recommended to use this http://www.wsgf.org/forums/viewtopic.ph ... 96#p174396
Attachments
rer2-vignette-removal.gif
rer2-vignette-removal.gif (1.08 MiB) Viewed 6975 times
Last edited by susahamat on 03 Feb 2019, 00:10, edited 3 times in total.
if you supporting what I do, buy me a coffee here https://ko-fi.com/kevinsesario or instead direct to paypal.me/kevinsesario . EMAIL:mailto:?subject=&body=, Steam: https://steamcommunity.com/id/sesariok
M1keSpb
Posts: 2
Joined: 28 Jan 2019, 21:47

Re: Wrong FOV: RESIDENT EVIL 2 / BIOHAZARD RE:2 2019

Post by M1keSpb »

Hello, patch disable sharpening doesnt working on actual game. I will be grateful for any help. Thanks.
Attachments
disable sharpening.jpg
disable sharpening.jpg (31.18 KiB) Viewed 6554 times
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest