5870 - Eyefinity 6 edition overclock

Hardware discussions about AMD Eyefinity
Post Reply
Wack
Posts: 9
Joined: 04 Nov 2010, 14:17

5870 - Eyefinity 6 edition overclock

Post by Wack »

Hi All,

I have a quick question regarding the 5870 eyefinity edition.

I'm running 3 of these in Xfire. (2 Powercolour and 1 Diamond, all 3 with stock cooling.)

I'm considering doing a moderate overclock on them. I hear just maxing the 2 faders (900/1300)
out is fine since the CCC overdrive is not giving you "enough rope to hang yourself".
so it's reasonably safe to do so but I'd like your input.

I also hear that the "auto-tune" is not particularly good.

I have little experience with GPU overclocking and have no intention of getting into a complicated process.

Thanks
User avatar
Delphium
Administrators
Administrators
Posts: 1789
Joined: 27 Dec 2009, 14:27

Re: 5870 - Eyefinity 6 edition overclock

Post by Delphium »

If you have enough ventalation in the case then you may be able to do it no problem.
Ultimately just keep an eye on the temps and only increase by small amounts, ie a few Hz at a time ~10hz usually recommended.

You may also wish to check out an overclocking article such as this one which should give you some guidence and understanding.
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 4 guests