Widescreen Gaming Forum

as title says

specs:
PANELS: 2x ITUX97E panel (UXGA 1600x1200 15") (from dell) - I paid 37$ (for both incl shipping)
RES: 2400x1600 23" 15:10 aspect ratio
ELECTRONIC: 2x universal lvds pcb board from ebay - cost 64$ for both incl shipping
TOTAL DIMENSIONS: 484 x 317mm x 7mm thickness (bare panels) - bezel 3,5mm
PSU: each panel have 12V input, you need 12V psu or just from 4 pin molex
POWER CONSUMPTION: 13W panels (both) + electronics (dunno but 6-7W max i think) - total 20W






2x15 + 23" eizo


I am looking to get third screen so maybe in next month

This is pretty amazing! Although two isn't suitable for gaming due to the bezel being in the middle but once you get the third monitor, you'll have yourself one kick-ass setup.

Pretty cool project! Maybe you can make a vid or write a build guide. Would love to watch/read that.

Can I ask where you get panels?
I would love to do something like this.
Would probably like to try and do a seamless 5760x1080, need to get edgeless panels.
Is there such a thing and where?

LuckyNoS7evin wrote:Can I ask where you get panels?
I would love to do something like this.
Would probably like to try and do a seamless 5760x1080, need to get edgeless panels.
Is there such a thing and where?

I bought locally, bargain but for 35$ incl shipping (each) I can buy a ton of them lol

Biggest disadvantage of this setup are TN panels which has very low angles of visibility (left and right is even ok, but up/down is horrbile) and if you do portrait as I am you see right/left AS down/right so not good for gaming or pro use

This is not a problem for me bcoz i will use these 2-3 panels above my main monitor to display markets/stock exhange/email etc

duniek wrote:

LuckyNoS7evin wrote:Can I ask where you get panels?
I would love to do something like this.
Would probably like to try and do a seamless 5760x1080, need to get edgeless panels.
Is there such a thing and where?

I bought locally, bargain but for 35$ incl shipping (each) I can buy a ton of them lol

biggest disadvantage of this setup are TN panels very low angles of visibility (left and right is even ok, but up/down is horrbile) and if you do portrait as I am you see right/left AS down/right

this is not a problem for me bcoz i will use these 2-3 panels above my main monitor to display markets/stock exhange/email etc

thanks mate... will try and find a source in the UK, may just try and a couple of monitors second hand first!!

Nice mate, Maybe you can make a frame for it all when you're done.

I've always wanted to do something like that.... well 30''+ xD

But I never found a panel reseller, no

On 15" 3x1P 4:3 I will get 30-31" and almost 21:9 aspect ratio with res 3600x1600

waiting for third tft panel

meanwhile





- L shape alu profile 12x12 x 1,5mm x2 72cm - cost 1-2$
- M2 screws - 1$
- stand from old sasmung 19" 4:3 screen - lying around but normally 10$ max

Oh my. Kind of jealous. Kudos Mate.

MEH
If smb want this setup (3 screen) lmk on PM

1600pix vertically isnt enought for me for stock exchange charts so I will need to buy WUXGA screens

I bought third panel for 60zł (19$) incl shipping
Simple datasheet says its a IPS panel, but i cant find anymore data like lvds pinout etc.
LCD should arrive on wednesday so I hope will work with controller from other panel.

Anyway, I plug one panel to molex 12V connector from PSU
Power consumption of one screen is ~10W

Looks like you are having lots of fun!

I would love to do something like that!

I was thinking of making a home made projector with a lcd panel. But i couldnt find out enough info about if i could get a 2560 x 1440 lcd to work in the build.

on left side - 19" dell 4:3


i have only two controllers, third should be here in 2-3weeks

awesome cannot wait for final show and tell

Whoa, awesome.

Wow, cool so this are still the 25" 2500x1600 ?

Will Ati let you use eyefinity with the three rotated screens? BTW nice job, it looks amazing