23" 2400x1600 monitor (small eyefinity) for 100$

[duniek]

as title says

specs:
PANELS: 2x ITUX97E panel (UXGA 1600x1200 15") (from dell) - I paid 37$ (for both incl shipping)
RES: 2400x1600 23" 15:10 aspect ratio
ELECTRONIC: 2x universal lvds pcb board from ebay - cost 64$ for both incl shipping
TOTAL DIMENSIONS: 484 x 317mm x 7mm thickness (bare panels) - bezel 3,5mm
PSU: each panel have 12V input, you need 12V psu or just from 4 pin molex
POWER CONSUMPTION: 13W panels (both) + electronics (dunno but 6-7W max i think) - total 20W






2x15 + 23" eizo


I am looking to get third screen so maybe in next month

[rene13cross]

This is pretty amazing! Although two isn't suitable for gaming due to the bezel being in the middle but once you get the third monitor, you'll have yourself one kick-ass setup.

[Wijkert]

Pretty cool project! Maybe you can make a vid or write a build guide. Would love to watch/read that.

[LuckyNoS7evin]

Can I ask where you get panels?
I would love to do something like this.
Would probably like to try and do a seamless 5760x1080, need to get edgeless panels.
Is there such a thing and where?

[duniek]

Can I ask where you get panels?
I would love to do something like this.
Would probably like to try and do a seamless 5760x1080, need to get edgeless panels.
Is there such a thing and where?

I bought locally, bargain but for 35$ incl shipping (each) I can buy a ton of them lol

Biggest disadvantage of this setup are TN panels which has very low angles of visibility (left and right is even ok, but up/down is horrbile) and if you do portrait as I am you see right/left AS down/right so not good for gaming or pro use

This is not a problem for me bcoz i will use these 2-3 panels above my main monitor to display markets/stock exhange/email etc

[LuckyNoS7evin]

Can I ask where you get panels?
I would love to do something like this.
Would probably like to try and do a seamless 5760x1080, need to get edgeless panels.
Is there such a thing and where?

I bought locally, bargain but for 35$ incl shipping (each) I can buy a ton of them lol

biggest disadvantage of this setup are TN panels very low angles of visibility (left and right is even ok, but up/down is horrbile) and if you do portrait as I am you see right/left AS down/right

this is not a problem for me bcoz i will use these 2-3 panels above my main monitor to display markets/stock exhange/email etc

thanks mate... will try and find a source in the UK, may just try and a couple of monitors second hand first!!

[suiken_2mieu]

Nice mate, Maybe you can make a frame for it all when you're done.

[Haldi]

I've always wanted to do something like that.... well 30''+ xD

But I never found a panel reseller, no

[duniek]

On 15" 3x1P 4:3 I will get 30-31" and almost 21:9 aspect ratio with res 3600x1600

[duniek]

waiting for third tft panel

meanwhile





- L shape alu profile 12x12 x 1,5mm x2 72cm - cost 1-2$
- M2 screws - 1$
- stand from old sasmung 19" 4:3 screen - lying around but normally 10$ max

[suiken_2mieu]

Oh my. Kind of jealous. Kudos Mate.

[duniek]

MEH
If smb want this setup (3 screen) lmk on PM

1600pix vertically isnt enought for me for stock exchange charts so I will need to buy WUXGA screens

[duniek]

I bought third panel for 60zł (19$) incl shipping
Simple datasheet says its a IPS panel, but i cant find anymore data like lvds pinout etc.
LCD should arrive on wednesday so I hope will work with controller from other panel.

Anyway, I plug one panel to molex 12V connector from PSU
Power consumption of one screen is ~10W

[Hatlesschimp]

Looks like you are having lots of fun!

I would love to do something like that!

I was thinking of making a home made projector with a lcd panel. But i couldnt find out enough info about if i could get a 2560 x 1440 lcd to work in the build.

[duniek]

on left side - 19" dell 4:3


i have only two controllers, third should be here in 2-3weeks

[LuckyNoS7evin]

awesome cannot wait for final show and tell

[suiken_2mieu]

Whoa, awesome.

[duniek]

[Haldi]

Wow, cool so this are still the 25" 2500x1600 ?

[spentamanyu]

Will Ati let you use eyefinity with the three rotated screens? BTW nice job, it looks amazing