Was looking around tonight. Saw a few old threads and articles on the web about a few Curved Displays from 2008/2009. NEC did one, Alienware did one...also Ostendo.
I see nothing on the market today. Anyone know if they exist..by who? If they were out 3-4 years ago selling for 7K I'd think they'd be all over by now.
Curved Display Monitors?
- suiken_2mieu
- Insiders

- Posts: 2351
- Joined: 20 Aug 2009, 04:20
- Location: Virginia
- Contact:
Ostendo, the manufacturer,
Ostendo, the manufacturer, has ceased production of them. So they can only be found used, and even then good luck. they're not very good displays as they are limited to 2880x900 which is super low.
Personally I'd rather buy a large curved glass, put something opaque behind it and hit it with some projectors and use nthusiasm to correct the image. This is most likely cheaper, higher resolution, and scalable as new projectors get released.
Jump to 58 seconds for something similar.
Personally I'd rather buy a large curved glass, put something opaque behind it and hit it with some projectors and use nthusiasm to correct the image. This is most likely cheaper, higher resolution, and scalable as new projectors get released.
Jump to 58 seconds for something similar.
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |
-
CarbonExtreme
- Posts: 5
- Joined: 13 May 2012, 06:06
Thanks, very helpful.
Thanks, very helpful. Question though, whats nthusiasm?
I googled it and came back with nothing.
Overall how hard is that settup to do and get working? I'm not a supertech with systems, but I have built a few over the years. Am I dreaming with something like that with those projectors?
I googled it and came back with nothing.
Overall how hard is that settup to do and get working? I'm not a supertech with systems, but I have built a few over the years. Am I dreaming with something like that with those projectors?
-
CarbonExtreme
- Posts: 5
- Joined: 13 May 2012, 06:06
Thanks, very helpful.
Thanks, very helpful. Question though, whats nthusiasm?
I googled it and came back with nothing.
Overall how hard is that settup to do and get working? I'm not a supertech with systems, but I have built a few over the years. Am I dreaming with something like that with those projectors?
I googled it and came back with nothing.
Overall how hard is that settup to do and get working? I'm not a supertech with systems, but I have built a few over the years. Am I dreaming with something like that with those projectors?
- suiken_2mieu
- Insiders

- Posts: 2351
- Joined: 20 Aug 2009, 04:20
- Location: Virginia
- Contact:
It allows for the circular
It allows for the circular projection.
Here's a thread of it working: http://www.wsgf.org/gallery/exposure-2011-nthusim
Here's a thread of it working: http://www.wsgf.org/gallery/exposure-2011-nthusim
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |
Who is online
Users browsing this forum: No registered users and 20 guests
