Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080

[icemanmelb]

Guys,
I've just noticed on the Matrox Website that it now supports 5760 x 1080 resolution at 50hz. Since I owned 2 x LG Flatron E2340, I was wondering if anyone can give me hints on how to find out if it works at 50 hz before I get a third one...

I have the TripleHead2Go DisplayPort running of an Nvidia GeForce GTX 260M

According to the Matrox Website

http://www.matrox.com/graphics/en/products/gxm/th2go/
Supports a maximum resolution of 5760x1080 (3x 1920x1080)1, 2 across three monitors; displays attached to TripleHead2Go must run at the same resolution

Thanks

[scavvenjahh]

Try to create a custom resolution of 1920x1080, 50 Hz in Nvidia Control Panel: Display > Change resolution > Customize... > Create Custom Resolution.

[icemanmelb]

Try to create a custom resolution of 1920x1080, 50 Hz in Nvidia Control Panel: Display > Change resolution > Customize... > Create Custom Resolution.

it's impossible to get 50 Hz in Nvida...

I give up and will ring Matrox instead.

thanks

[scavvenjahh]

FYI my own monitor (Acer GD245hq) passes the test no problem, so this should be a valid method. I hope Matrox can help you out with some custom refresh rate trick or sth.

[kiwi53]

it's impossible to get 50 Hz in Nvida...

I give up and will ring Matrox instead.

thanks

I'm running 5760x1080 with 3 x 24" Samsung SyncMaster B2440 screens, Nvidia GTX480 with latest driver and TH2GO Digital Edition with latest firmware. I created a custom 5760x1080 resolution in the Nvidia Control Panel using 57hz before installing the Matrox PowerDesk software. I have tested this with XP32, XP64 and Win7 Ultimate 32.

[suiken_2mieu]

You should connect one of your monitors to one of the ports on the card (by passing the TH2Go).
Then try doing the custom resolution on that monitor.

[Matthew]

it's impossible to get 50 Hz in Nvida...

I give up and will ring Matrox instead.

thanks

I had no problem with my Nvidia GeForce GTS 450 getting 5760x1080@50Hz. I didnt have to do anything besides select the resolution in the powerdesk software. although i purchased my monitors because they were advertized as allowing a 50Hz refresh rate. if you can get a single monitor working at 1080P@50Hz three should run fine.

[Guilherme]

Hello,

I also want to buy 3 monitors for 3x 1920x1080 with TH2GO, can we make a list of the monitors that work with this resolution @50hz?

I have a 4870X2.

Thanks