Mviewtech release MV103-HDVE PRO with 4800x900 60HZ

[mviewtech]

Hello All,
Mviewtech release 4800x900 60hz for our MV103-HDVE PRO product. by the end of this week ,user can buy at Dhgate. If it's available in Dhgate, i will update message at here.
input interface : one dual link DVI interface .maximum pixel clock 330Mhz
output interface: thee DVI-I(can DVI and VGA simultaneously),maximum pixel clock 165Mhz
accessories:one 1.5m Duallink DVI cable,one 5V/2A power supply(100-240V) AC ,one RS-232 cable
dimension:165mmx130mmx28mm
warranty:2 year limited warranty

product feauture.
1.support the world`s first 4200x1050 60Hz resolution which can support three SXGA+ projectors @ WINXP32/64,VISTA32/64 and Windows7 32/64.
2.support the world`s first 5760x1080P 50Hz resolution @ WINXP and VISTA
3.support the world`s first 5040x1050 60HZ resolution @ WINXP32/64,VISTA32/64 and Windows7 32/64.
4.support the world`s first 4800x900 60HZ resolution @ WINXP32/64,VISTA32/64 and Windows7 32/64.
5.user can enable DX10 in Vista and Windows7
6.No HDCP
7. bezel management through 232 control.
8.support ATI and NVIDIA card with DVI output.
9.user can configure display format with DDC or RS232.

Best Regards!
Mviewtech.
2010.01.06

[mviewtech]

hello all,
It is available for our product at dhgate the link is
http://www.dhgate.com/wholesale/products/ff808081237ec04601237fc0330a7c67.html

Best Regards!
Mviewtech

[mviewtech]

Hello All,
From now,our MV103-HDVE PRO can support bezel management. user can adjust from 1 to 128 pixels.

Best Regards!
Mviewtech.

[suiken_2mieu]

2.support the world`s first 5760x1080P 50Hz resolution @ WINXP and VISTA

Can I also assume Windows 7 x64 works as well?

[mviewtech]

2.support the world`s first 5760x1080P 50Hz resolution @ WINXP and VISTA

Can I also assume Windows 7 x64 works as well?

I can't sure this format is ok for windows 7 x64.
Best Regards!
Mviewtech

[scavvenjahh]

Can I download updated software/firmware for my MViewer ? Or do I have to buy a new unit to get these new features ? :?

[mviewtech]

Can I download updated software/firmware for my MViewer ? Or do I have to buy a new unit to get these new features ? :?

Hi scavvenjahh,
you must buy a new unit for 4800x900 60HZ and bezel management.
we have been updated our hardware for these features.
Best Regards!
Mviewtech

[driftefx]

[quote]

2.support the world`s first 5760x1080P 50Hz resolution @ WINXP and VISTA

Can I also assume Windows 7 x64 works as well?

I can't sure this format is ok for windows 7 x64.
Best Regards!
Mviewtech

Have you tried?

[mviewtech]

Hello all,
I post some picture for 4800x900 60HZ and bezel management tools.
http://hi.baidu.com/mviewtech/album/item/a972b18b52f905810e2444f8.html

http://hi.baidu.com/mviewtech/album/item/a972b18b52f905810e2444f8.html#IMG=4cf0b2f2299ea5f17831aaf9

Best Regards!
Mviewtech

[Tsusai]

Asking a question on the behalf of a friend. The bezel management that you have added this time, can you turn the correction on and off as needed? Or is something for the future? (Example: Turn on bezel management in-game, turn it off on the desktop).

[suiken_2mieu]

Can your product work with ATI cards?

Can Bezel Management be turned On and Off with a Hotkey?
-- If it can, is the Hotkey Configurable?

[mviewtech]

Hi,
Can your product work with ATI cards?
Yes,we can.because of bezel management by RS232. Has nothing to do with the graphics。
Can Bezel Management be turned On and Off with a Hotkey?
-- If it can, is the Hotkey Configurable?

our software can't support a Hotkey by turned on/off. I can feedback your recommended for our company.

if user want to disable bezel management,user can drag pixel to 0.

Best Regards!
Mviewtech

[suiken_2mieu]

mviewtech, thanks, Bezel Management one of the defining features of the TH2go. Since people will be going from games, to desktop work, it's rather important not to have to pull up another utility. I want to give you guys the best chance possible. The more competition, the better I say.

[driftefx]

I just got it and I wanted to say some stuff about it.

The item is great. It is extremely sturdy and well built.

Their customer service is also great.

Video games work at 5040x1050@60hz.

The main reason why I bought it was to get it running at 5760x1080. It did work at 50hz with great ease, HOWEVER, all of the games crash and Mviewtech have the same problems running at the resolution. All of the games do not have an option to select that resolution. When I forced applications to run at that resolution, I get a crash to desktop. They haven't found a fix for it but are still keeping an eye on it. Currently, I have it uninstalled until they find a fix to get it working at 5760x1080.

[suiken_2mieu]

Did you try truly configurable games like Unreal Tournament 2004 and Killing floor (Same engine). You can manually configure those games exceedingly. I'd say go pick up UT2004 cheap if you don't have it and try it.

[driftefx]

Mview guys,

Have you been able to get any progress on getting the product to work with games at 5760x1080? I would like an update.

Thanks!

[mviewtech]

Mview guys,

Have you been able to get any progress on getting the product to work with games at 5760x1080? I would like an update.

Thanks!

Hi,
we can't get the information for 5760x1080 50HZ game.
Best Regards!
Mviewtech

[mfraser]

Hi there........ congrats on the new product!! :bowdown I have a question regarding how you are handling Bezel Management. I have been using Nvidia Surround in 2d, but (For my own reasons) I want to move to an external hardware solution like the MV103-HDVE Pro, rather than using the videocards themselves. For reference, using the NV Control Panel, at 5760x1080 I have had to remove 140 pixels between the monitors to get the right perspective.

My question is regarding the figure of 128 pixels for your bezel management. Does that relate to each monitor or the overall fix? For example, can I remove say, 70 pixels from each edge of the middle monitor and 70 from the right and left edges of the left and right monitors respectively to get the same amount of pixels removed?? I hope I've explained that well enough??

How is the pixel removal applied? Is it similar to the Matrox Bezel Management where the outer monitor images are pushed inwards toward the middle monitor - or Nvidia's solution of increasing the overall resolution?? Or your own bit of magic?? :wink:

I look forward to your reply.
Best regards,
Mat.F

[mviewtech]

Hi,
our bezel mangerment maxium is 128 pixel, you can remove pixel from 0 to 128 pixel;our technical is family with matrox triplehead2go . you need RS232 to control this function.
Best Regards!
Mviewtech

[razzar]

Hello everyone i have got this product a couple of weeks ago and for the most part it runs flawless. The issue i have is with the native resolution it states. My monotors are able to produce 1600x900 and i can add the resolution of 4800x900 manually. I can also set the desktop at this resolution but all the games i play only allow me to use the 3840 x 768. This is the resolution that the MV103 displays as my native resolution in the nvidea control panel. It seem the games i play only reconize the native resolution and not the custom one i added (1600x900). When i try to manually configure the games to the 4800x900 it says my monotors dont support it.

Like i said the desktop is no problem. The games i am trying to get it to work on are Left For Dead 2 and Fallout 3