TH2Go monitor setup

Discussions about getting games to run in a Multi-Mon setup.
Post Reply
wumzi
Posts: 8
Joined: 25 Sep 2008, 01:28

TH2Go monitor setup

Post by wumzi »

I'm in the process of building my new PC for the purpose of TH2Go gaming. The one thing left for me to look into are the monitors. There's 2 things I can't find an answer to (the forums were a HUUUUGE help for everything else though :D )

1) I'm thinking of grabbing a set of Dell 2208WFP 22" widescreen monitors. Anyone using this model? How well does it handle 3x1680x1050 @57Hz? It's the 57Hz bit that worries me.

2) I'm also looking for a triple monitor stand. Everything I've found so far is only capable of holding 3 standard ratio monitors. The only thing coming close is this Ergotron. But even then, it seems the monitors are too big. Anyone know of anything else that's available?
windturbin
Posts: 40
Joined: 02 Apr 2008, 21:02

Re: TH2Go monitor setup

Post by windturbin »


2) I'm also looking for a triple monitor stand. Everything I've found so far is only capable of holding 3 standard ratio monitors. The only thing coming close is this Ergotron. But even then, it seems the monitors are too big. Anyone know of anything else that's available?


I hung my three 24" LG monitors on my wall for $150.

I used a ($50 Target) flat panel flush mount for my center monitor. And two ($50 Lowes) swivel mounts for my side monitors. It worked extremely well!

The four screw holes for the bracket mounts per monitor are pretty much standard at 3 7/8" apart I believe they are.
CyberCrist
Posts: 49
Joined: 12 Aug 2008, 19:38

Re: TH2Go monitor setup

Post by CyberCrist »

I'm in the process of building my new PC for the purpose of TH2Go gaming. The one thing left for me to look into are the monitors. There's 2 things I can't find an answer to (the forums were a HUUUUGE help for everything else though :D )

1) I'm thinking of grabbing a set of Dell 2208WFP 22" widescreen monitors. Anyone using this model? How well does it handle 3x1680x1050 @57Hz? It's the 57Hz bit that worries me.

2) I'm also looking for a triple monitor stand. Everything I've found so far is only capable of holding 3 standard ratio monitors. The only thing coming close is this Ergotron. But even then, it seems the monitors are too big. Anyone know of anything else that's available?


The Ergotron LX3 can hold 3 22" monitors, although it is a VERY tight fit. See my review here:

http://www.widescreengamingforum.com/node/9434t=
wumzi
Posts: 8
Joined: 25 Sep 2008, 01:28

TH2Go monitor setup

Post by wumzi »

Exactly what I was looking for, thank you.

A question though, in one of your pictures, it shows the side monitor mounted on the very edge of the arm. How securely attached is it? It looks as if the mounting could slip off the arm if I so much as touch the monitor!

Still this is the best solution I've come across so far. One thing I'm worried about is the monitor dimensions. Could you tell me what your general LCD dimensions are (height, width, depth)? If the Dells are much thicker than yours, then they'd need a longer arm to accomodate the smaller radius needed to set them side by side. If that's the case, then this stand would be too small for my needs.
[email protected]
Posts: 446
Joined: 15 Sep 2007, 21:28

TH2Go monitor setup

Post by [email protected] »

THat link in google crome.


Warning: Visiting this site may harm your computer!
The website at http://www.widescreengamingforum.com contains elements from the site web.aanet.com.au, which appears to host malware – software that can hurt your computer or otherwise operate without your consent. Just visiting a site that contains malware can infect your computer.
For detailed information about the problems with these elements, visit the Google Safe Browsing diagnostic page for web.aanet.com.au.
Learn more about how to protect yourself from harmful software online.
I understand that visiting this site may harm my computer.
CyberCrist
Posts: 49
Joined: 12 Aug 2008, 19:38

TH2Go monitor setup

Post by CyberCrist »

Exactly what I was looking for, thank you.

A question though, in one of your pictures, it shows the side monitor mounted on the very edge of the arm. How securely attached is it? It looks as if the mounting could slip off the arm if I so much as touch the monitor!

Still this is the best solution I've come across so far. One thing I'm worried about is the monitor dimensions. Could you tell me what your general LCD dimensions are (height, width, depth)? If the Dells are much thicker than yours, then they'd need a longer arm to accomodate the smaller radius needed to set them side by side. If that's the case, then this stand would be too small for my needs.


Yes, they are mounted on the very edge, but the clamp has a dial you turn to tighten them onto the arm. I haven't had a problem with anything falling off. I'll measure my 3 monitors tonight when I get home and let you know.
CyberCrist
Posts: 49
Joined: 12 Aug 2008, 19:38

TH2Go monitor setup

Post by CyberCrist »

Exactly what I was looking for, thank you.

A question though, in one of your pictures, it shows the side monitor mounted on the very edge of the arm. How securely attached is it? It looks as if the mounting could slip off the arm if I so much as touch the monitor!

Still this is the best solution I've come across so far. One thing I'm worried about is the monitor dimensions. Could you tell me what your general LCD dimensions are (height, width, depth)? If the Dells are much thicker than yours, then they'd need a longer arm to accomodate the smaller radius needed to set them side by side. If that's the case, then this stand would be too small for my needs.


Here are the measurements Wumzi,

The two Chimei's 221D (WxHxD):

20.94" x 15.83" x 9.61" Weight - 9.92 lbs

The middle monitor which is a Samsung 2253BW (WxHxD):

20.2" x 15.8" x 6" Weight 11.2 pounds
wumzi
Posts: 8
Joined: 25 Sep 2008, 01:28

TH2Go monitor setup

Post by wumzi »

I found the Dell dimensions on their site, 14.18â€
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests