5040X1050 60HZ do you need?

mviewtech · Post by **mviewtech** » 30 Oct 2009, 15:46

Here's what I get :

XP : 5040x1050@60 Hz ok, 1680x1050 = black screen.
Vista : 5040x1050@60Hz unavailable, 1680x1050 ok.
:shock: :?:

I use nvidia driver 191.07 and MVV.inf in both OSes. In Vista I ran the utility, selected Enable Wide-Mode Timings and rebooted multiple times and still can't get 5040@60. What more should I do ? :?

Hi, sorry for reply late. I test the same driver on our lab and some other customers can also get 5040x1050@60 in Vista. Can you try the following:
(1) In vista, please use the display property advanced mode and unselect the "hide mode not supported by monitor" for the display setting.
(2) after Enable Wide-Mode Timings and rebooted can you see 4320x900 mode on the display property?

If there is still problem, please sent mail to [email protected] and I will ask engineer to test and find the solution for you.

Post by **scavvenjahh** » 30 Oct 2009, 16:57

1) Done.
2) No, there are no other wide modes to choose from.
So it seems like the wide modes are not added. Multiple reboots, cold boots and freshly reisntalled nvidia driver didn't help.

E-mail sent...

mviewtech · Post by **mviewtech** » 30 Oct 2009, 17:59

1) Done.
2) No, there are no other wide modes to choose from.
So it seems like the wide modes are not added. Multiple reboots, cold boots and freshly reisntalled nvidia driver didn't help.

E-mail sent...

Hi,
1.do you read the readme.txt file in CD? install our software must run as administrator .
2.can you step by the following .
a. uninstall Nvidia driver,reboot.
b. install 191.07 driver ,reboot.
c. install our software as administrator,reboot.
d. run our software as administror,enable wide screen mode and reboot.
f do you see the 5040x1050 ,4320x900,4200x1050 or 4098x768?
Best Regards!
Mviewtech

Post by **scavvenjahh** » 30 Oct 2009, 19:39

1.Yes, I read it. And the pdf file. My only user account has administrator rights.
2.Did it, for the third time now. Nothing changes upon reboot, I see none of these resolutions.

What could possibly block the process ? :?

Post by **thales100** » 30 Oct 2009, 19:58

What could possibly block the process ? :?

Were you able to run games at 5040x1050 with your setup, the 191.07 drivers and matrox triplehead2go ? Have you tested it before trying the mview ?

mviewtech · Post by **mviewtech** » 31 Oct 2009, 01:56

1.Yes, I read it. And the pdf file. My only user account has administrator rights.
2.Did it, for the third time now. Nothing changes upon reboot, I see none of these resolutions.

What could possibly block the process ? :?

Hi scavvenjahh,
1.our software must write some information to windows, it seem vista block our software to do this .
2.could you install and run our software with mouse right button and select "run as an administrator" option.
3.please give me vista version(vista64 basic , business.....),.I will set up your environment and test it.

Best Regards!

Mviewtech

Post by **scavvenjahh** » 31 Oct 2009, 14:20

Okay, so I did exactly what you wrote. No luck.
I can add modes like 2400x600 no problem, but the New Wide Modes never ever show up.

I'm running Vista Ultimate 64-bit SP2.

mviewtech · Post by **mviewtech** » 03 Nov 2009, 16:21

Okay, so I did exactly what you wrote. No luck.
I can add modes like 2400x600 no problem, but the New Wide Modes never ever show up.

I'm running Vista Ultimate 64-bit SP2.

Hi scavvenjahh,
our engineer test in vista64 Ultimate 64-bit SP2 that is no problem.perhaps install issue.you can see the link.
http://mviewtech.spaces.live.com/blog/cns!D67AB635CD5D1036!149.entry

5040x1050 60hz vista64 ultimate sp2 install step
Mviewtech's MV103-HDVE PRO install at vista as following steps.
1.install MviewCustomertool_pro_en.exe ,use mouse right button select Run as adminstrator.

2.run MView config tools ,use mouse right button select Run as adminstrator

3.select enable wide screen mode ,and click update mode ,restart computor.

4.install MVV.inf. open device manager -->select monitors>genenic PnP monitor.

5.select update driver software

6.select have disk ,and click MVV.inf(this file in the CDROM) file.

7.after install MVV.inf ,restart your computer.

Best Regards!

Mviewtech

Post by **scavvenjahh** » 03 Nov 2009, 22:26

Yes, I received your e-mail. Thanks, I'll give it a shot tomorrow.
(The only difference with what I did : install MVV.inf after the update. I always start by installing the driver, as I do with TripleHead. This might very well be my mistake) :oops:

mviewtech · Post by **mviewtech** » 04 Nov 2009, 06:52

Yes, I received your e-mail. Thanks, I'll give it a shot tomorrow.
(The only difference with what I did : install MVV.inf after the update. I always start by installing the driver, as I do with TripleHead. This might very well be my mistake) :oops:

Hi scavvenjahh,
Even if your account with administrator privileges, you must follow the above method to install.

Best Regards!

Mviewtech

Post by **scavvenjahh** » 04 Nov 2009, 09:34

Understood, and that's what I did. Still no success. :neutral:
I give up for now and will try in Win7 later. Thanks for bearing with me...

Edit : just for the heck of it, I tried adding an extra layer of admin priviledges and selected 'Disable driver signing enforcement' on each reboot. It doesn't work any better - even worse : after I Update wide modes in the MView Tool, Vista won't boot unless I use 'Last known working configuration' instead. I wonder if that's significant.

mviewtech · Post by **mviewtech** » 06 Nov 2009, 16:21

Understood, and that's what I did. Still no success. :neutral:
I give up for now and will try in Win7 later. Thanks for bearing with me...

Edit : just for the heck of it, I tried adding an extra layer of admin priviledges and selected 'Disable driver signing enforcement' on each reboot. It doesn't work any better - even worse : after I Update wide modes in the MView Tool, Vista won't boot unless I use 'Last known working configuration' instead. I wonder if that's significant.

Hi scavvenjahh，
I set up 5040x1050 60hz successfully in vista 64bit.the OS is very clearly,I don't install any other software.do you think that any software block our tools to work.I recommend that you remove some software (eg.powerstrip,clear driver,matrox software). you can try it!

Best Regards!
Mviewtech

Post by **scavvenjahh** » 13 Nov 2009, 09:23

Brand new Win7 x64 install, no difference : the wide modes never appear.
I'm logging off to weep.

Where are the new wide modes supposed to be added ? In a system file, the registry,... ? Is there any way to add them manually ?

mviewtech · Post by **mviewtech** » 13 Nov 2009, 13:49

Brand new Win7 x64 install, no difference : the wide modes never appear.
I'm logging off to weep.

Where are the new wide modes supposed to be added ? In a system file, the registry,... ? Is there any way to add them manually ?

Hi ,
could you request a Remote Assistance through MSN?
perhaps I can do something for you .
My MSN: [email protected]

Best Regards!

Mviewtech

Post by **suiken_2mieu** » 13 Nov 2009, 16:20

MViewtech, does your product support 4800x900 (or 3x1600x900) at this time?

It would be a great option for people who are recently updating their monitors, as 16:10 monitors have all but disappeared from stores lately.

Post by **scavvenjahh** » 13 Nov 2009, 16:21

No thanks.
I 'd rather keep my TH2G and use MViewer on my other XP PC. My frustration with triple-screen in Vista/7 has reached a peak and I just don't want to waste a single minute more trying to make it work, be it with TH2G or MViewer. I'm henceforth waiting for massive positive user feedback or big official news before I mess with my setup again.

Thanks for your help & patience, and I'm sure your product is great. Just not working with me as I thought it would.

mviewtech · Post by **mviewtech** » 15 Nov 2009, 13:48

MViewtech, does your product support 4800x900 (or 3x1600x900) at this time?

It would be a great option for people who are recently updating their monitors, as 16:10 monitors have all but disappeared from stores lately.

Hi,

according to FLEXVIEW technology ,it should be oK. our product can output standard 3X1600x900 60HZ. if most people like this format ,our company will release this format for our product.

Best Regards!
Mviewtech

driftefx · Post by **driftefx** » 02 Dec 2009, 06:58

Does this product support 5760 x 1080 with English support/instructions for Windows 7 x64bit? If yes, at what hz?

Post by **suiken_2mieu** » 02 Dec 2009, 22:00

Does this product support 5760 x 1080 with English support/instructions for Windows 7 x64bit? If yes, at what hz?

it should, the TH2Go supports it at 60Hz

Post by **BHawthorne** » 03 Dec 2009, 05:15

[quote]Does this product support 5760 x 1080 with English support/instructions for Windows 7 x64bit? If yes, at what hz?

it should, the TH2Go supports it at 60Hz

Since when does TH2G do 5760x1080 60hz?

Widescreen Gaming Forum