5040X1050 60HZ do you need?

mviewtech · Post by **mviewtech** » 15 Oct 2009, 14:36

Hello all,
our company release our MV103-HDVE PRO ,user can buy at
http://www.dhgate.com/wholesale/products/ff808081237ec04601237fc0330a7c67.html

input interface : one duallink DVI inerface .maxium pixel clock 330Mhz
output interface: trhee DVI-I(can DVI-D ang VGA simulaneously),maxium pixel clock 165Mhz
accessories:one duallink DVI cable,one 5V/2A power supply(100-240V) AC ,one RS-232 cable
dimension:165mmx130mmx28mm
warranty:2 year limited warranty

product feauture.
1.support 5040x1050 60HZ @ WINXP,VISTA and Windows7,user can connect any 22 LCD (VGA or DVI interface).
2.user can enable DX10 in Vista and Windows7
3.No HDCP
4.No bezel management.
5.support ATI and NVIDIA card with DVI output.
6.user can configure display format with DDC or RS232.

Mviewtech.

Post by **scavvenjahh** » 15 Oct 2009, 16:21

Price of this Pro version is now 224$/150€ :shock: S&H to France : +23$ - Grand total : 247$/165€ :arrow: I bought one ! :oops:

Will probably not receive my MView before weeks, but at this price it could be a very good intermediate solution for painless 5040 in Vista before I upgrade my graphics card & TripleHead to DP... [crossing fingers]

mviewtech · Post by **mviewtech** » 16 Oct 2009, 14:39

thank you for your interesting MV103-HDVE PRO product.i will quickly process your order.

Post by **thales100** » 16 Oct 2009, 14:45

Price of this Pro version is now 224$/150€ :shock: S&H to France : +23$ - Grand total : 247$/165€ :arrow: I bought one ! :oops:

Will probably not receive my MView before weeks, but at this price it could be a very good intermediate solution for painless 5040 in Vista before I upgrade my graphics card & TripleHead to DP... [crossing fingers]

Sounds good, nice price. :P

Post by **scavvenjahh** » 16 Oct 2009, 16:13

The link is now dead. Was there only one unit available ??

mviewtech · Post by **mviewtech** » 17 Oct 2009, 14:17

I am updating some information for our product.please waiting a day. you will access this link.

SiriusDragon · Post by **SiriusDragon** » 20 Oct 2009, 07:48

If this product can do 4800x1200 (ie. 3 x 1600x1200) I'd love to buy one!

My matrox box can't max out my 3 monitors and this way I wouldn't have to bother with EyeFinity, SoftTH, etc... to get the maximum resolution :D This box = much cheaper than a 5870 + DP adapter...

I realise the frequency can't be 60hz, which is fine. My monitors are pretty flexible with what they support.

It seems like this box is more user configurable than the matrox one as well. I don't need bezel management so that doesn't bother me, and HDCP doesn't matter either. So if I can configure 4800x1200... then I think I've found an instant purchase :D

Post by **scavvenjahh** » 20 Oct 2009, 09:49

I'll try that as soon as I receive mine... although my monitors might not be as flexible as yours. (3x 1600x1200 x55Hz roughly equals 3x 1680x1050 x60Hz if I'm not mistaken...) The product's specs are quite unclear by the way, I have no idea what 4200x1050 is :?

SiriusDragon · Post by **SiriusDragon** » 20 Oct 2009, 10:30

Thanks heaps, that'd be extremely appreciated :D I'm stunned about how cheap it is compared to the Matrox box... I paid around $400AUD for my DTH2Go :(

I remember testing my monitors individually at one point, they're Samsung 204B. Each one can handle 1600x1200 @ 55hz with no issues, just have to hope the MView (and my video card) can. It's nvidia though so I should just be able to make a custom resolution I guess.

mviewtech · Post by **mviewtech** » 23 Oct 2009, 14:27

I'll try that as soon as I receive mine... although my monitors might not be as flexible as yours. (3x 1600x1200 x55Hz roughly equals 3x 1680x1050 x60Hz if I'm not mistaken...) The product's specs are quite unclear by the way, I have no idea what 4200x1050 is :?

Hi, do you receive our product today?

2009-10-19 13:21 WDM Online
2009-10-21 13:07 Import Gateway Acceptance Collected from customer
2009-10-21 22:01 International Hub Arrived at outward Office of Exchange
2009-10-21 22:42 International Hub Left origin country
2009-10-22 04:00 International Hub Despatched from hub
2009-10-22 14:10 Delivery Agent - CRONOPOST ROISSY Arrived in destination country
2009-10-23 03:29 Delivery Agent - FRANCE Arrived at delivery depot
2009-10-23 11:22 Delivery Agent - FRANCE Attempted delivery - addressee unavailable

Post by **scavvenjahh** » 26 Oct 2009, 10:00

Technically, yes ! I wasn't home at the time of delivery, so I had to claim it at the post office today.

Package is pretty minimal - no additional cardboard, paper or bubble wrap, just the product in its box wrapped in plastic film. Of course there are no mobile parts that could easily break, but China is not exactly right next door so I hope the trip was not too tough a ride...

Anyway, I'll connect the box later today and share my impressions. I can already thank DHgate for the swift transaction :)
Edit: oops, the power supply's plug is not the euro standard... and I have none at hand that can output 5V/2A. I'll have to find an adapter or replacement unit before I can give my MViewer a whirl :(

mviewtech · Post by **mviewtech** » 28 Oct 2009, 15:59

If this product can do 4800x1200 (ie. 3 x 1600x1200) I'd love to buy one!

My matrox box can't max out my 3 monitors and this way I wouldn't have to bother with EyeFinity, SoftTH, etc... to get the maximum resolution :D This box = much cheaper than a 5870 + DP adapter...

I realise the frequency can't be 60hz, which is fine. My monitors are pretty flexible with what they support.

It seems like this box is more user configurable than the matrox one as well. I don't need bezel management so that doesn't bother me, and HDCP doesn't matter either. So if I can configure 4800x1200... then I think I've found an instant purchase :D

our product have test 4800x1200 55HZ it's should be OK at WINXP.if you interesting this format you can order it ,and send the internal message at DHGATE and note 4800x1200 55HZ.we will add this format for you.

Post by **scavvenjahh** » 28 Oct 2009, 19:45

Okay, my MViewer is all set up and I'm currently running 5040x1050@60Hz in XP, no problem. Will try the best part later, namely 5040@60 in Vista/DX10...

One thing I hadn't realized : it's impossible to use a single-screen resolution with MViewer ! Bye-bye centered 1680x1050... :oops:

Post by **suiken_2mieu** » 28 Oct 2009, 22:05

Okay, my MViewer is all set up and I'm currently running 5040x1050@60Hz in XP, no problem. Will try the best part later, namely 5040@60 in Vista/DX10...

One thing I hadn't realized : it's impossible to use a single-screen resolution with MViewer ! Bye-bye centered 1680x1050... :oops:

that is a gigantic loss to those who don't have an extended monitor like i do.

mviewtech · Post by **mviewtech** » 29 Oct 2009, 08:40

Okay, my MViewer is all set up and I'm currently running 5040x1050@60Hz in XP, no problem. Will try the best part later, namely 5040@60 in Vista/DX10...

One thing I hadn't realized : it's impossible to use a single-screen resolution with MViewer ! Bye-bye centered 1680x1050... :oops:

our product can auto detect input video format resolution,for example 3840x1024 out 3 screens(1,2,3),3360x1050 output 2 screens(1,2) ,we have added the single screen resolution in the EDID.you can change the resolution at display porperties->settings screen resolution you will see the single screen format and you can apply for your format ,you will see the single screen (2)

kevintrisha · Post by **kevintrisha** » 29 Oct 2009, 09:27

Hello MVIEWTECH,

I would like to volunteer and review your product MV103-HDVE Pro.
I would be happy to give a very detailed report for the readers of this
post. My brother and I have been building computers for a long time now.
You can see his work if you google "steampunk frankenstein".
I write reports for a living since I am a police officer. A detailed review would promote your product and give readers a detailed report to
consider an alternative to the TripleHead2Go.

I have the TripleHead2Go with three Samsung L227WTG 22" monitors.
Nvidia 8800GTX SLI and an OC Q6600 all water cooled. This may not
be top of the line, but sufficient enough to test the product.

I have spent countless hours to get 5040x1050 / 55HZ in Vista.

Now MORE COUNTLESS HOURS and I CANNOT get 5040x1050
in Windows 7. I have tried each and every post suggestion. I believe I will have to wait for the next set of NVIDIA drivers.
I could have played through five full games by now. Yes!!! We are interested in your product.

I am anxiously waiting to hear from others who have purchased this
product for Windows 7 with out of the box 5040x1050 / 60HZ
performance to include playing games in Directx10 with the LATEST DRIVERS. I know it is not all NVIDIAs fault, but new drivers to make my
Matrox work with Windows 7 in 5040x1050 would be GREAT!!!
I know Flight Simulator X has been calling my name since I got the new TrackIR device. I spend all my time TWEAKING my monitors!!
Yes....we are interested in your product!!!

I am writing this very tired and it is way past my bedtime. Hopefully I
have conveyed that I am VERY INTERESTED!!!

Thank you to anyone who gives the rest of us feedback.

Best Regards,

Kevin Mattocks

Post by **scavvenjahh** » 29 Oct 2009, 21:22

our product can auto detect input video format resolution,for example 3840x1024 out 3 screens(1,2,3),3360x1050 output 2 screens(1,2) ,we have added the single screen resolution in the EDID.you can change the resolution at display porperties->settings screen resolution you will see the single screen format and you can apply for your format ,you will see the single screen (2)

Well, setting display resolution to 1680x1050 simply gets my monitors to go blank/standby :? I'm having (unrelated) issues with my Vista at the moment, so I'll try and tame the Mviewer beast later...

Post by **scavvenjahh** » 30 Oct 2009, 09:32

Here's what I get :

XP : 5040x1050@60 Hz ok, 1680x1050 = black screen.
Vista : 5040x1050@60Hz unavailable, 1680x1050 ok.
:shock: :?:

I use nvidia driver 191.07 and MVV.inf in both OSes. In Vista I ran the utility, selected Enable Wide-Mode Timings and rebooted multiple times and still can't get 5040@60. What more should I do ? :?

Post by **suiken_2mieu** » 30 Oct 2009, 15:05

Here's what I get :

XP : 5040x1050@60 Hz ok, 1680x1050 = black screen.
Vista : 5040x1050@60Hz unavailable, 1680x1050 ok.
:shock: :?:

I use nvidia driver 191.07 and MVV.inf in both OSes. In Vista I ran the utility, selected Enable Wide-Mode Timings and rebooted multiple times and still can't get 5040@60. What more should I do ? :?

try it in win 7

soffball · Post by **soffball** » 30 Oct 2009, 15:17

Very interested in your results, but the lack of bezel management may be a deal breaker.

Widescreen Gaming Forum