Ryse Son of Rome in Surround ?

Topics about game solutions, and success or failure in getting them to work.
Post Reply
t2n_maxpayne
Posts: 1
Joined: 11 Oct 2014, 05:44

Ryse Son of Rome in Surround ?

Post by t2n_maxpayne »

Hi,
Ryse Son of Rome came out and I purchased it today.
It does not seem to support a proper in surround (5760x1080)? Was wondering if anyone has figured out how to fix it?
If someone can fix this please reply.
Thanks !!!
morback
Posts: 1
Joined: 12 Sep 2014, 09:23

Re: Ryse Son of Rome in Surround ?

Post by morback »

Hi,

It seems to support Eyefinity. However the HUD is stretched.

Screenshots (In-game and menu) :

Image

Image

Resolution : 4480x1022 /// [1280x1024]x[ 1920 x 1080 ]x[1280x1024]

Crossfire is not supported since I play in this resolution (no SSAA, details low, temporal AA and motion blur enabled) with an average of 30fps with CFX activated and between 45 and 50fps with CFX disabled. Catalyst 14.7 since 14.9 freezes my pc with cfx.

Configuration : 7970GE/R9 280X crossfire, 3570k, 8GB RAM, 850psu.
Last edited by morback on 12 Oct 2014, 18:12, edited 1 time in total.
Hank
Posts: 6
Joined: 23 Jul 2014, 12:37

Re: Ryse Son of Rome in Surround ?

Post by Hank »

was thinking about purchase it too, but without 3xscreen i won't make it
AndroidVageta
Posts: 5
Joined: 06 Sep 2014, 04:45

Re: Ryse Son of Rome in Surround ?

Post by AndroidVageta »

I know that it works OK in Eyefinity. The UI is stretched but the actual game (ya know, the 3D part) is fine. FOV and all that.

Does it not work at all for you or is it just the UI that's the problem?
Toothless Spoon
Insiders
Insiders
Posts: 516
Joined: 01 Sep 2010, 11:38

Re: Ryse Son of Rome in Surround ?

Post by Toothless Spoon »

It's actually not too bad. The game scales Hor+ but initially the menus and HUD are Stretched and Spanned. There is a option in game that allows you to adjust the menus/HUD parameters, but it doesn't allow enough adjustment to centre the HUD. If that was fixed, and the constraints lifted even more, the game would work flawlessly - at least on Nvidia Surround.

I've started a thread on steam, head over there too to voice your concerns.

http://steamcommunity.com/app/302510/di ... 1413049407
起死回生 (kishi kaisei) Wake from death and return to life..
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: Ryse Son of Rome in Surround ?

Post by helifax »

Toothless Spoon wrote:It's actually not too bad. The game scales Hor+ but initially the menus and HUD are Stretched and Spanned. There is a option in game that allows you to adjust the menus/HUD parameters, but it doesn't allow enough adjustment to centre the HUD. If that was fixed, and the constraints lifted even more, the game would work flawlessly - at least on Nvidia Surround.

I've started a thread on steam, head over there too to voice your concerns.

http://steamcommunity.com/app/302510/di ... 1413049407


Hud fix:
Image

FWS plugin:
Image

Just need to send it to Hayden so he can push it live.
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: Ryse Son of Rome in Surround ?

Post by helifax »

Fix is now part of Flawless WideScreen Fixer.
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
Toothless Spoon
Insiders
Insiders
Posts: 516
Joined: 01 Sep 2010, 11:38

Re: Ryse Son of Rome in Surround ?

Post by Toothless Spoon »

helifax wrote:Fix is now part of Flawless WideScreen Fixer.


Nice work, cheers. :rockout:
起死回生 (kishi kaisei) Wake from death and return to life..
User avatar
valcan_s
Insiders
Insiders
Posts: 285
Joined: 16 Jul 2011, 19:35
Location: Canada
Contact:

Re: Ryse Son of Rome in Surround ?

Post by valcan_s »

helifax wrote:Fix is now part of Flawless WideScreen Fixer.


Awesome Helifax works perfectly, thanks man :rockout:
User avatar
Funkengreuven
I Donated
I Donated
Posts: 92
Joined: 30 May 2012, 03:56

Re: Ryse Son of Rome in Surround ?

Post by Funkengreuven »

I've been trying to play this game a few times now in NVidia surround, but I keep getting low memory issues. Has anyone else seen this? I have PC visuals set to performance to free up as much vid memory as possible, and I'm playing it in all normal mode with no SSAO (or whatever its calling it on this game) and I still get low memory error a few seconds into game (bridge scene). Also, I can't seem to change the textures to anything lower than "very high", even though I have normal selected for everything else...it's greyed out. I have 3GB 780ti cards.
| i7 3930K | 16GB Mushkin Redline 2133MHz | ASUS Rampage IV Formula | EVGA 2080ti SC ULTRA | EVGA Supernova 1200W PS | 2x Samsung EVO 500GB SSD RAID 0 | 2x IBM 520 SSD 240GB | Rosewill Blackhawk | 3x Acer Predator G-Sync 144MHz @ 7680x1440 |
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: Ryse Son of Rome in Surround ?

Post by helifax »

Funkengreuven wrote:I've been trying to play this game a few times now in NVidia surround, but I keep getting low memory issues. Has anyone else seen this? I have PC visuals set to performance to free up as much vid memory as possible, and I'm playing it in all normal mode with no SSAO (or whatever its calling it on this game) and I still get low memory error a few seconds into game (bridge scene). Also, I can't seem to change the textures to anything lower than "very high", even though I have normal selected for everything else...it's greyed out. I have 3GB 780ti cards.


Have the same cards. Played the whole game 4 times in 3D Surround (2D Vision + 3DVision). Didn't have any problems with the game, just the drivers sometimes freezing up. (Doing the same thing in other games as well.. If I am luck I get a nvidia driver kernel crash & recovery...If not ...well no recovery...) I expect the driver is playing some tricks on you...
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
User avatar
Gungoose360
Posts: 35
Joined: 16 Mar 2014, 21:36
Location: USA

Re: Ryse Son of Rome in Surround ?

Post by Gungoose360 »

Hey bro!
Just wondering if this game can span across multiple monitors without using surround? I.E: windowed drag to fit?
I can't seem to figure out where to type in the custom resolution, maybe i have to play the game to a certain point for it to actually create an ini file?
Wish every game had the Bioware/EA stretch to fit display config... :think:
Acer Predator AG7750-U222 (2010)
16G DDR3 RAM, Dual GTX 980s, Intel 6-Core 990X CPU @3.75 Ghz (OC), Sony 43 inch 4KTV (center display in Landscape mode) two 1280p 24" monitors (attached to center display in Portrait mode), Windows 7 64-Bit on 2TB Western Digital Black HD, Windows 10 64-Bit on WD 1.5TB Green. PDP Stealth Xbox ONE Wired Controller for decreased latency.
Dante003
Posts: 9
Joined: 12 Jan 2014, 17:32

Re: Ryse Son of Rome in Surround ?

Post by Dante003 »

The Flawless Widescreen fix is not working here, it seems that the game received a patch, so it stopped working.
imusrt
Insiders
Insiders
Posts: 291
Joined: 21 Oct 2014, 23:33

Re: Ryse Son of Rome in Surround ?

Post by imusrt »

Answers for blubberduck86 & Dante003.

1. Manual spread method (written for PLP, but usable for 21:9):
http://www.wsgf.org/blog/imusrt/2015/04/27/ryse-son-rome-2014-manual-plp-instructions
Image

2. FWS notes:
A. FWS is optional. Was only used to fix game's stretched HUD, menu & text. Game still plays well without it.
B. If 21:9, be sure to alter FWS menu's Detection Override to use "fake PLP" (fake 16:9 center with fake slim sides).
21:9 e.g.:
Width: 2560
Height: 1080
Hud Width: 1920 (16:9 fake center)
Hud Height: 1080 (16:9 fake center)
Horizontal Display Count: 3 (with fake sides)
Vertical Display Count: 1
Hud X: 320 (which is 2560 minus 1920, divided by 2 = width of fake side)
Hud Y: 0

Dante003, could you confirm that FWS no longer works, even with these FWS detection override values?
Dante003
Posts: 9
Joined: 12 Jan 2014, 17:32

Re: Ryse Son of Rome in Surround ?

Post by Dante003 »

imusrt wrote:Answers for blubberduck86 & Dante003.

1. Manual spread method (written for PLP, but usable for 21:9):
http://www.wsgf.org/blog/imusrt/2015/04/27/ryse-son-rome-2014-manual-plp-instructions
Image

2. FWS notes:
A. FWS is optional. Was only used to fix game's stretched HUD, menu & text. Game still plays well without it.
B. If 21:9, be sure to alter FWS menu's Detection Override to use "fake PLP" (fake 16:9 center with fake slim sides).
21:9 e.g.:
Width: 2560
Height: 1080
Hud Width: 1920 (16:9 fake center)
Hud Height: 1080 (16:9 fake center)
Horizontal Display Count: 3 (with fake sides)
Vertical Display Count: 1
Hud X: 320 (which is 2560 minus 1920, divided by 2 = width of fake side)
Hud Y: 0

Dante003, could you confirm that FWS no longer works, even with these FWS detection override values?

With these configs it worked, without it, FWS closes, and if I open it again it says that cant enable the fix.
The main reason for me to try to fix is to see if the stretched cutscenes are fixed too.
NADRIGOL
Posts: 2
Joined: 30 Mar 2016, 22:05

Re: Ryse Son of Rome in Surround ?

Post by NADRIGOL »

Just bought this game from Steam. If I launch the game with the fix enabled, the menu is black. I can hear menu sound effects as I move the mouse around, but things don't seem to be in the correct positions, or at least I can't figure out how to start the game. If I launch the game and start the campaign with the stretched HUD, and then enable the fix, the HUD doesn't resolve to the patched values. It doesn't seem to have been patched since October 2015, so maybe I'm missing something someone else could point me in the direction of?
imusrt
Insiders
Insiders
Posts: 291
Joined: 21 Oct 2014, 23:33

Re: Ryse Son of Rome in Surround ?

Post by imusrt »

What's your resolution? Did you try FWS resolution override (described above)?
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests