Mass Effect (1) issues with WS Fixer/Flawless WS

[LiquidBronze]

Hi all,

I bought Mass effect (1) on greenman gaming, because it was only 5 bux, but didn't realize it needed to be activated through origin. I didn't think that would be a problem, but noticed that in widescreen fixer, the only patch to choose is the steam version (1.02) and when starting the game, the "fix" is not applied. I am guessing because it is only looking for the steam version exe or something? Is there a way to fix this, to see if the "fix" can be applied to the exe through origin?

The main issue is that the HUD is way off the screen, but normally WS Fixer or Flawless WS fixes these issues for me. I am using a Dell UltraSharp U2913WM (2560x1080 21:9).

Flawless WS seems to activate, but I still have the same issue of the HUD going way off the screen.

Any other things I could try or tips to run at my native resolution?

Thank you for any help.

LB

[helifax]

I think in Me1 you need to manually activate the fix by pressing the numpad *(star key) or whatever key you are setting in WSF Settings tab.
I haven't tested it with 21:9 single monitor, but if it doesn't work or an error is thrown let me know and I will update the plugin;)))

[LiquidBronze]

Hi helifax,

Thank you for the reply! OK, I was not aware I needed ot hit the designated key to make teh "fix" work. I made that key (-) the subtract key on the num pad. I hit it at the main menu, nothing happended, but when I go to resume a game, it crashes right away with the below log. It will also crash right away if I have the fix enabled right at the dev intro movies too.

Is there another log somewhere that you need to see?

Thank you very much for your help!

LB


Problem Event Name: APPCRASH
Application Name: MassEffect.exe
Application Version: 1.2.20608.0
Application Timestamp: 4a55ff66
Fault Module Name: MassEffect.exe
Fault Module Version: 1.2.20608.0
Fault Module Timestamp: 4a55ff66
Exception Code: c0000096
Exception Offset: 00b5b5a7
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 9e49
Additional Information 2: 9e49613274b658b02eec839158645c3d
Additional Information 3: 9e49
Additional Information 4: 9e49613274b658b02eec839158645c3d

[helifax]

Hi helifax,

Thank you for the reply! OK, I was not aware I needed ot hit the designated key to make teh "fix" work. I made that key (-) the subtract key on the num pad. I hit it at the main menu, nothing happended, but when I go to resume a game, it crashes right away with the below log. It will also crash right away if I have the fix enabled right at the dev intro movies too.

Is there another log somewhere that you need to see?

Thank you very much for your help!

LB


Problem Event Name: APPCRASH
Application Name: MassEffect.exe
Application Version: 1.2.20608.0
Application Timestamp: 4a55ff66
Fault Module Name: MassEffect.exe
Fault Module Version: 1.2.20608.0
Fault Module Timestamp: 4a55ff66
Exception Code: c0000096
Exception Offset: 00b5b5a7
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 9e49
Additional Information 2: 9e49613274b658b02eec839158645c3d
Additional Information 3: 9e49
Additional Information 4: 9e49613274b658b02eec839158645c3d

Are you using Mass Effect from Steam or Origin? Or a Retail Disc version?
I tested the plugin with the Steam and Origin version and I get no crash... (The crash happens mostly because the exe is different, which is the case for a retail version)

You can also try with the latest version of the Mass Effect plugin found here: 3D Surround Gallery -> My WSF Mods

Based on this info, I can probably help you once you tell all the above;))

[LiquidBronze]

Hi helifax,

Thank you for the help once again! I believe this may be considered the "disc" version now that I think of it, but not 100% ?

http://www.greenmangaming.com/s/us/en/p ... effect-na/

You get an old code that you need to then resister via an old EA site. You then get a new code for the game to be put into your origin library to play it. So I am not 100% sure that it is considered "disc" or "origin" exe.

I just went to the exe's root path and made a shortcut ont he desktop anyway. Should there be an option in the WS Fixer drop down for ver.1.02 origin when you hit the config icon?

Tried that new plugin as well, same thing, just CTD instantly, with that error message I pasted before.

Do you need any more info?

EDIT: FYI, I have also used LAA on the exe in order for the texture mod "MEUITM" to work. I tried using the non modified exe and I got the same crash as well. So whether or not the exe was modified using LAA, it didn't matter, same crash.

Thanks again!

LB

[helifax]

Hi helifax,

Thank you for the help once again! I believe this may be considered the "disc" version now that I think of it, but not 100% ?

http://www.greenmangaming.com/s/us/en/p ... effect-na/

You get an old code that you need to then resister via an old EA site. You then get a new code for the game to be put into your origin library to play it. So I am not 100% sure that it is considered "disc" or "origin" exe.

I just went to the exe's root path and made a shortcut ont he desktop anyway. Should there be an option in the WS Fixer drop down for ver.1.02 origin when you hit the config icon?

Tried that new plugin as well, same thing, just CTD instantly, with that error message I pasted before.

Do you need any more info?

EDIT: FYI, I have also used LAA on the exe in order for the texture mod "MEUITM" to work. I tried using the non modified exe and I got the same crash as well. So whether or not the exe was modified using LAA, it didn't matter, same crash.

Thanks again!

LB

So...basically you installed it from a disc but still requires Origin to play? I am confused hahahaha. Anyway... I know this is a bit much to ask, but you can you see if you uninstall it if you can download it and install it from Origin?
Last I checked The Origin & Steam versions were the same...but I might be wrong... I need to double check that.

Just Rechecked and its the same version.
Does your game version etc lists as in the attached picture?

[LiquidBronze]

Sorry, just to clarify, I did download and install from origin. The key that was given to me, I believe would be considered a "disc" key, because it is so old.

So the game was installed through origin.

Sorry for the confusion.

EDIT: Yes, my game config tab has those same game version numbers as in your screen shot above.

[helifax]

Sorry, just to clarify, I did download and install from origin. The key that was given to me, I believe would be considered a "disc" key, because it is so old.

So the game was installed through origin.

Sorry for the confusion.

No problem! So, then It's not a disc version (you can still find the disc version on ebay or the sorts where you don't require Origin to launch it) and so on. So basically you do have a Digital Version. I wonder why this happens. I will try to reinstall my version on Origin and see if something else is different... keep you posted;)

Edit: Ok I managed to replicate the issue! Apparently it appears on the Origin Version Only...lol...I will look into it a bit later on;)) thx

[LiquidBronze]

Great!! Thank you very much for checking into it helifax

LB

[helifax]

Updated the Plugin to work with the Origin Version (apparently it uses a different Exe.. )
Also added support for 21:9 Monitors.

You can download the latest version from 3D Surround Gallery -> My WSF MODS


For 21:9 only Configure the plugin manually like this:
- Monitor Count = 1
- Uncorrected Resolution = 1920 x 1080
- Corrected Resolution = 2560 x 1080

(The rule is simple: Uncorrected is your standard 16:10, 16:9 resolution, Corrected is your 21:9 resolution. However both resolutions must be VALID and have the same VALID HEIGHT)

[LiquidBronze]

Thank you very much sir, it works fantastic!!

Sent you a pm as well

LB

[helifax]

Thank you very much sir, it works fantastic!!

Sent you a pm as well

LB

I am really glad that it works;)) I plan to add 21:9 support in ME2 (Me3 plugin already has it) but when I cannot tell:)) but I will definitely do it in the future;))

[mirh]

Why latest widescreen fixer is still embedding plugin.masseffect version 2.4.960, instead of the updated 2.6.4.0 ?

[rakamy]

Sorry for bringing such an old thread alive but I have been lurking around WSGF (with out an account) for a while but this is the first time I needed to post so rather then make my own I am adding on to this one because I am having the same issue (I wanted to run threw Mass Effect trilogy as fem-shep instead of male Sheppard)

Anyway every time I start up WS fixer to run with Mass Effect my game CTD. I have the Origin version and below is the crash file that generates when I try it. The game is showing v1.02 under the config utility

Problem Event Name: APPCRASH
Application Name: MassEffect.exe
Application Version: 1.2.20608.0
Application Timestamp: 4a55fea1
Fault Module Name: MassEffect.exe
Fault Module Version: 1.2.20608.0
Fault Module Timestamp: 4a55fea1
Exception Code: c000001d
Exception Offset: 00728b68
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 4105
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e7

I was hoping someone can help me with this issue.