Mass Effect 3(demo): Lucy, they did it again!
-
Amon Amarth
- I Donated

- Posts: 513
- Joined: 18 Jul 2007, 04:19
Mass Effect 3(demo): Lucy, they did it again!
I can confirm that Mass Effect 3 (demo), does not support Eyefinity/NVIDIA Surround. And this time around, the resolutions are simply not even there. The highest it'll detect is 1920x1200 for me.
Welp, I'd say Bioware will end up doing the same thing again, unless by some miracle we really push them on this.
Welp, I'd say Bioware will end up doing the same thing again, unless by some miracle we really push them on this.
-
mariyoshikong
- Posts: 1
- Joined: 15 Feb 2012, 02:39
You might want to check your
You might want to check your setup. Eyefinity is working flawlessly for me. The in game cut scenes are on the center monitor and the game looks awesome. The only thing that is kinda annoying is the low FOV and the non centered HUD.
Just played through the demo,
Just played through the demo, worked great in Eyefinity for me too.
I can probably fix the FoV
I can probably fix the FoV with no issues. I'm not 100% certain on the interface, though.
I'd really like to make a fix for this game, and even buy it, but I'm against Origin.
I'd really like to make a fix for this game, and even buy it, but I'm against Origin.
Widescreen Fixer - https://www.widescreenfixer.org/
Widescreen Fixer Twitter - https://twitter.com/widescreenfixer
Personal Twitter - https://twitter.com/davidrudie
Widescreen Fixer Twitter - https://twitter.com/widescreenfixer
Personal Twitter - https://twitter.com/davidrudie
dopefish, what methods do you
dopefish, what methods do you use to discover where to alter fov and hud values? Are you just scanning in memory for specific things? I would like to know the technical side of what goes into fixing games so that I may try my hand at it
-
Amon Amarth
- I Donated

- Posts: 513
- Joined: 18 Jul 2007, 04:19
Was able to get it working
Was able to get it working through configuring that GameSettings file. But as dope said, had some bad FoV. Also, the menus seem to be zoomed/cropped in. I was barely able to make out what was on screen to start the actual game.
I think the game doesn't detect NVIDIA surround unless that INI file is edited.
None the less, I was able to at least play it!
I think the game doesn't detect NVIDIA surround unless that INI file is edited.
None the less, I was able to at least play it!
I dunno what the issue is
I dunno what the issue is with the FOV? Was perfectly fine to me!! Just played through the entire demo and loved every minute of it. As for the menu, is it worth the hassel? Honestly - the health bars etc, the most important stuff is already on the middle screen. IMO this demo is near close to perfect in every reguard for eyefinity users, hopefully its just an demo issue for NV Surround users.
And I can understand your reluctance with Origin Dopefish. I preffer to use the one service where all my games are, but I gotta admit, EA really have a point this time with what Valve/Steam are limiting.. As much as id preffer to buy it on Steam, if they cant sort out the issue at hand I will buy it on Origin - this game is worth it.
And I can understand your reluctance with Origin Dopefish. I preffer to use the one service where all my games are, but I gotta admit, EA really have a point this time with what Valve/Steam are limiting.. As much as id preffer to buy it on Steam, if they cant sort out the issue at hand I will buy it on Origin - this game is worth it.
Portrait EF (3600x1920) does
Portrait EF (3600x1920) does not work for me. I can select the resolution, and the game seems to scale properly, but only the center monitor shows anything. The left and right are blank. This worked in ME2 :(
-
Toothless Spoon
- Insiders

- Posts: 516
- Joined: 01 Sep 2010, 11:38
It must be a nvidia thing. I
It must be a nvidia thing. I started the demo and it was across 3 screens. Main menu was fine, but character selection was all zoomed in and I couldnt continue into the game. Same with coop :(
起死回生 (kishi kaisei) Wake from death and return to life..
-
thatdude90210
- Posts: 81
- Joined: 27 Sep 2009, 06:43
Worked great here too, but a
Worked great here too, but a little choppy on my 5870 ( >5760x1200, whatever the bezel comp res was). The FOV looked just fine to me, better than most games I've played with Eyefinity.
The only issue was the already mentioned non-centered HUD.
I just might to upgrade to a 7950 or 7970 for this game.
The only issue was the already mentioned non-centered HUD.
I just might to upgrade to a 7950 or 7970 for this game.
morfinx wrote:Portrait EF
Portrait EF (3600x1920) does not work for me. I can select the resolution, and the game seems to scale properly, but only the center monitor shows anything. The left and right are blank. This worked in ME2 :(
Update: It works 3150x1680. It's not my monitors' native resolution, but it works. It kept crashing though. The 2nd time I was in the 2nd part of the demo when it crashed. Since you can't save in the demo, I haven't bothered to restart again.
Running on my 7970 at
Running on my 7970 at 5992x1200 was pretty smooth. There where only 1-2 instances where I noticed the frames dip but im relegating that to poor programming or the current shoddy 7970 driver.. All the combat areas with lots happening ran smooth as.
Hi,I am investigating the
Hi,
I am investigating the possibility to center the HUD on the center screen. So far I had some progress regarding this aspect: Managed to put all the menus and hud on the left monitor. All that is left is to be pushed on the center. I will look some more into it this evening.
For NV Surround users, I saw the game working very well (no crashes etc) if the game is run in Windows/borderless mode. Maybe this helps. Also inside the game folder you can find the classic tool to config your resolutions (same as me2).
Best Regards,
Helifax
I am investigating the possibility to center the HUD on the center screen. So far I had some progress regarding this aspect: Managed to put all the menus and hud on the left monitor. All that is left is to be pushed on the center. I will look some more into it this evening.
For NV Surround users, I saw the game working very well (no crashes etc) if the game is run in Windows/borderless mode. Maybe this helps. Also inside the game folder you can find the classic tool to config your resolutions (same as me2).
Best Regards,
Helifax
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer
Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery
E-mail and Paypal (for people who wants it): [email protected]
WideScreen Fixer
Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery
E-mail and Paypal (for people who wants it): [email protected]
-
Toothless Spoon
- Insiders

- Posts: 516
- Joined: 01 Sep 2010, 11:38
helifax wrote:Hi,I am
Hi,
I am investigating the possibility to center the HUD on the center screen. So far I had some progress regarding this aspect: Managed to put all the menus and hud on the left monitor. All that is left is to be pushed on the center. I will look some more into it this evening.
For NV Surround users, I saw the game working very well (no crashes etc) if the game is run in Windows/borderless mode. Maybe this helps. Also inside the game folder you can find the classic tool to config your resolutions (same as me2).
Best Regards,
Helifax
Mate I tried the borderless window mode and still can't get it to work properly. It loads up on 3 screens, but the options menu and the single/coop menu's are all zoomed in and I can't make selection properly. :-/
起死回生 (kishi kaisei) Wake from death and return to life..
Toothless Spoon wrote:helifax
[quote]Hi,
I am investigating the possibility to center the HUD on the center screen. So far I had some progress regarding this aspect: Managed to put all the menus and hud on the left monitor. All that is left is to be pushed on the center. I will look some more into it this evening.
For NV Surround users, I saw the game working very well (no crashes etc) if the game is run in Windows/borderless mode. Maybe this helps. Also inside the game folder you can find the classic tool to config your resolutions (same as me2).
Best Regards,
Helifax
Mate I tried the borderless window mode and still can't get it to work properly. It loads up on 3 screens, but the options menu and the single/coop menu's are all zoomed in and I can't make selection properly. :-/
A yes! that is why we need the center hud thingy:D
I was having problems with seeing the image on all 3 screens, left monitor was always out of sync in my case (but I use older drivers so maybe that is why). So that is why I went to window mode:D
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer
Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery
E-mail and Paypal (for people who wants it): [email protected]
WideScreen Fixer
Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery
E-mail and Paypal (for people who wants it): [email protected]
-
Toothless Spoon
- Insiders

- Posts: 516
- Joined: 01 Sep 2010, 11:38
helifax wrote:Toothless Spoon
[quote][quote]Hi,
I am investigating the possibility to center the HUD on the center screen. So far I had some progress regarding this aspect: Managed to put all the menus and hud on the left monitor. All that is left is to be pushed on the center. I will look some more into it this evening.
For NV Surround users, I saw the game working very well (no crashes etc) if the game is run in Windows/borderless mode. Maybe this helps. Also inside the game folder you can find the classic tool to config your resolutions (same as me2).
Best Regards,
Helifax
Mate I tried the borderless window mode and still can't get it to work properly. It loads up on 3 screens, but the options menu and the single/coop menu's are all zoomed in and I can't make selection properly. :-/
A yes! that is why we need the center hud thingy:D
I was having problems with seeing the image on all 3 screens, left monitor was always out of sync in my case (but I use older drivers so maybe that is why). So that is why I went to window mode:D
I went to window mode also and same thing...I can get all the way up to the end of the selection process in the single player menu, but then I can't select confirm at the bottom of the screen as I cant see it :P Are you saying that you can see the menu in window mode? To me it's like the fix that you have been working on recently for mass effect 2, once that is enabled the main menu is in proper proportion.
起死回生 (kishi kaisei) Wake from death and return to life..
I had to complete character
I had to complete character creation in a single monitor resolution, but once in the game I was able to use eyefinity with no problem. It looked great. Only problem was what was already mentioned with the hud being over three monitors.
- skipclarke
- Founder

- Posts: 7358
- Joined: 13 Oct 2003, 05:00
Can someone post a pic of the
Can someone post a pic of the messed up menus?
Screenshots:Developer video
Screenshots:
Developer video - just fine!
Main menu - zoomed in but usable
Character creation single player - zoomed in and not usable!
Loading screen - perfect!
Multi-Player menu - zoomed in and not usable!

Developer video - just fine!
Main menu - zoomed in but usable
Character creation single player - zoomed in and not usable!
Loading screen - perfect!
Multi-Player menu - zoomed in and not usable!

-
Toothless Spoon
- Insiders

- Posts: 516
- Joined: 01 Sep 2010, 11:38
Falcon1
Screenshots:
(Admin Edit: No need to quote the screens)
Falcon and anyone else, those menus are exactly the same as surround, but in single player, how did you get past the finale menu that needs you to confirm you character creation? I try pressing enter and Y but nothing works.
起死回生 (kishi kaisei) Wake from death and return to life..
Who is online
Users browsing this forum: Bing [Bot] and 5 guests

