Eyefinity connections advice needed

Hardware discussions about AMD Eyefinity
Post Reply
neuropsy
Posts: 4
Joined: 01 Dec 2011, 21:14

Eyefinity connections advice needed

Post by neuropsy »

Hi All !!

I need some help.

I just purchased a single HIS Radeon HD 6770 video card and 3 Dell Ultrasharp U2412M monitors (24”) and I could use some guidance from you guys on connections for an Eyefinity set-up. Specifically, I’m asking for guidance or confirmation regarding connections between video card and monitors.

The HIS video card has three types of connection ports (a single full Displayport, a single HDMI port, and two DVI ports). Each Dell monitor has a single Displayport connection port, a single DVI connection port, and a single VGA connection port. My OS is Windows 7 Professional with SP1. I’ve downloaded all the AMD Catalyst drivers (11.10) but have not hooked up the monitors yet.

Is this the correct connection scheme or have I missed the mark?

HIS Single DP output -----------------------------------------→ Single DP input (Dell 1st Monitor)

HIS DVI 1st available output ---------------------------------------→ DVI input (Dell 2nd Monitor)

HIS DVI 2nd available output -------------------------------------→ DVI input (Dell 3rd Monitor)


Also, do I configure the Catalyst software before hooking up the monitors or after. I assume after but this is all new to me and so thought I’d better ask before getting into trouble.

Thanks.
User avatar
Delphium
Administrators
Administrators
Posts: 1789
Joined: 27 Dec 2009, 14:27

You have the cable

Post by Delphium »

:welcome :)

You have the cable connectivity spot on. :D

It also does not matter to install drivers before or after the monitors are connected but you will need all monitors connected to be able to create an eyefinity group in the catalyst drivers, so I would reccomend connecting everything up then installing and configing the drivers/software. :)
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |
neuropsy
Posts: 4
Joined: 01 Dec 2011, 21:14

Thank you!!!

Post by neuropsy »

Thanks Delphium!! [Big sigh of relief on this side of the Atlantic] I'm waiting on the delivery of my DP to DP cable. This is also my first build so I'm on an adventure here.

Once again, THANK YOU.
User avatar
Delphium
Administrators
Administrators
Posts: 1789
Joined: 27 Dec 2009, 14:27

You are welcome, if you have

Post by Delphium »

You are welcome, if you have any further questions do not hesitate to search our site for similar questions or feel free to ask :)
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |
neuropsy
Posts: 4
Joined: 01 Dec 2011, 21:14

Very much

Post by neuropsy »

Very much appreciated!!!!!!!!!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests