Starting Eyefinity, need help with one thing.
Starting Eyefinity, need help with one thing.
Hello, I've been reading these forums for quite a while now making note of all the different FoV hacks, etc needed to get games running properly on an Eyefinity setup and I've been reading all of the threads which relate to my problem but I'd rather write a post here in order to get a direct response. Basically, I have my 3 monitors, all of which are 24" Samsung Syncmaster 2443BW running at 1920x1200, but I am yet to buy an adapter considering I can't quite decide which way to go with it. Obviously I want to get this sorted as quickly as possible since my monitors are just gathering dust at the moment.
I have a Sapphire 5970 so instead of a displayport adapter I need a mini-displayport but obviously the active DVI to Mini-DP adapters seem to be causing all types of problems, the most common being the screen blinking. The question I want to ask the readers of this forum are which adapter would you recommend? The main question I'm posing is whether it would be better to go with a Active DVI to Mini-DP adapter or possibly use a Passive/Active Mini-DP to VGA adapter since some users feedback say these are more reliable than their DVI counterparts.
I would really appreciate some help on this matter since I'm really stuck at what to do, in regards to money I would be quite happy to pay anything considering it gets the job done. I'm living in the UK so I'd prefer it if I could buy the item from the UK/Europe but if I have to I will quite happily buy from the USA. Thank you in advance for any feedback and I hope to get my setup running as soon as possible.
I have a Sapphire 5970 so instead of a displayport adapter I need a mini-displayport but obviously the active DVI to Mini-DP adapters seem to be causing all types of problems, the most common being the screen blinking. The question I want to ask the readers of this forum are which adapter would you recommend? The main question I'm posing is whether it would be better to go with a Active DVI to Mini-DP adapter or possibly use a Passive/Active Mini-DP to VGA adapter since some users feedback say these are more reliable than their DVI counterparts.
I would really appreciate some help on this matter since I'm really stuck at what to do, in regards to money I would be quite happy to pay anything considering it gets the job done. I'm living in the UK so I'd prefer it if I could buy the item from the UK/Europe but if I have to I will quite happily buy from the USA. Thank you in advance for any feedback and I hope to get my setup running as soon as possible.
-
Dyre Straits
- Posts: 210
- Joined: 06 May 2010, 05:52
Re: Starting Eyefinity, need help with one thing.
An announcement was just made over at Rage3D about some newly tested adapters that are "guaranteed" to work. You may want to check out the post there....
http://www.rage3d.com/reviews/video/ati_eyefinity_ecosystem_update/
http://www.rage3d.com/reviews/video/ati_eyefinity_ecosystem_update/
~Windows 7 x64 Professional~MSI X58A-GD45~Intel I7-950~6x2 GB DDR3 1600 RAM (Triple Channel)~RealTek Onboard~XFX HD 6950 2 GB GDDR5~3 ViewSonic 24 inch LCDs in Eyefinity~SATA Dual Layer DVD RW~1000 W PSU~And a Whole Lot More!~Done with Vista~XP Pro on the way out, too!~AND....250 GB XBOX 360~
Re: Starting Eyefinity, need help with one thing.
You may also find further information regarding this adaptor from here http://www.widescreengamingforum.com/wiki/ATI_Eyefinity_-_Ecosystem_September_2010
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |
Re: Starting Eyefinity, need help with one thing.
Thank you, any idea on when these adapters will be hitting the UK? I've also had a look around the internet to see where I could order one from America but they seem in short supply and only really found one on NCIX, who seem only to ship to Canada or south to the USA.
Re: Starting Eyefinity, need help with one thing.
I would guess Overclockers would have them in stock quite soon, and of course Scan*
*there are other online retailers based in the UK
:)
*there are other online retailers based in the UK
:)
P8Z68-V Pro | 2600K | HR02 | HD5850 | 2x4GB Vengeance LP | 128GB M4 + 6TB | X-Fi > HD595 | AX850 | Tai Chi | PB278Q | G110 + Deathadder 2013
P8Z77-V | 3570K | Mugen 2 | HD5850 | 2x4GB Vengeance LP | 500GB | X-750 | Fractal R3 | U2212HM | G110 + G400
P8H77-I | G860 | 4650 | 2x2GB XMS | 320GB | CX500 | Prodigy | T22B350EW | MX518
DC3217IYE | 1x4GB Vengeance | 64GB M4 | TX-42VT20E
P8Z77-V | 3570K | Mugen 2 | HD5850 | 2x4GB Vengeance LP | 500GB | X-750 | Fractal R3 | U2212HM | G110 + G400
P8H77-I | G860 | 4650 | 2x2GB XMS | 320GB | CX500 | Prodigy | T22B350EW | MX518
DC3217IYE | 1x4GB Vengeance | 64GB M4 | TX-42VT20E
Re: Starting Eyefinity, need help with one thing.
I would guess Overclockers would have them in stock quite soon, and of course Scan*
*there are other online retailers based in the UK
:)
I've been checking Overclockers recently and the only adapter they seem to be selling is http://www.overclockers.co.uk/showproduct.php?prodid=CB-047-OK but it just seems too cheap to solve all these problems.
Will keep an eye out on Scan as well, thank you :D
Re: Starting Eyefinity, need help with one thing.
I am lead to beleive that Scan are due to start stocking them near the end of this month.
Time of course will tell. :)
Time of course will tell. :)
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |
Re: Starting Eyefinity, need help with one thing.
Will ensure to keep an eye out on Scan then, Thank you Delph :)
Who is online
Users browsing this forum: No registered users and 12 guests


