Widescreen Gaming Forum

Over in OCN was posted with Surround take a look:
So saw in the Overclock.net surround forum, for those that didnt know the latest drivers unlock 4-5 monitor surround for Nvidia.

Pretty awesome IMHO I setup my monitors for 4 way surround and now I dont have to do all my hacks and programming getting movies to span all 4 screens.

I think games like Civ V, etc will work well, FPS DEF NOT... Tried Titanfall and will never get used to the aim being in the center of of the bezel. However, it was long overdue happy Nvidia did it.
Before Photos:


This is Titanfall as an example with some movies with surround on 4 (frame rates are shot due to one titan in the system. But I got some kraber kills.
Notice how bad the crosshair is. Its not even enjoyable

Of course this gets shown the day after the video recording is done for the YouTubes. >.<

Awesome to see, though! You are right, long overdue.

Awesome news! Weird that it isn't even in the release highlights. Next thing you know, they will support mixed resolutions as well. Would like to try out 16/9 + 21/9 + 16/9.

So it's official now!
They've been teasing this functionality on their surround setup page.
Glad to see it works! Now people aren't stuck on AMD if they want portrait mode.

Wijkert wrote:Awesome news! Weird that it isn't even in the release highlights. Next thing you know, they will support mixed resolutions as well. Would like to try out 16/9 + 21/9 + 16/9.

I am wondering if Nvidia has updated its surround capabilities to include different monitor aspect ratio and different resolutions.

For example: I have my 7950 sapphire flex in crossfire. I play eyefinity games at 5920x1440. My 3 screens are 1680x1050x2 (16x10) for the outiside screens. And my u2711 at 2560x1440 (16x9) in the middle. All are dp monitors.

I do this because for the games that do not support multi monitor I like the bigger 2560x1440 screen.

I have 2 other screens that I use in extended mode for a total of 5. I do see that Nvidia does that also. Just have not seen the mixed res and aspect part yet.

If anyone gets the new cards and tries this please reply to this thread and if you see it on the net please link it!

Anyone have links to more information on this? Do they also enable dual-span mode? What drivers is this enabled in?

I've had a chance to test it myself. Supports 5x1 @ 120hz surround configurations.

Bezel correction works fine.

Just to give anyone looking for a similar idea a step in the right direction as I don't believe I've seen any rigs running 5x1+1 on nvidia yet.

Drivers I've tried, 334.80, 337.09

This is awesome, thanks for sharing Axium!

Nice.

Anyone know if it supports 2x1 spanning? Is this 900-series specific or will it work on 700-series too?

Slightly OT but doesn't hurt to ask, anyone know if the current Nvidia 3D Vision Surround works in portrait mode? A few years ago I knew it didn't. With the changes in Nvidia Surround I thought I'd revisit the question again.

BHawthorne wrote:Anyone know if it supports 2x1 spanning? Is this 900-series specific or will it work on 700-series too?

Looks like 1 x 2 and 2 x 1 are options (I have 980). I didn't click on them since I like my setup and my computer just got jacked up trying to mess with it (I'm just happy it works now, so I'll leave it alone).

BHawthorne wrote:Slightly OT but doesn't hurt to ask, anyone know if the current Nvidia 3D Vision Surround works in portrait mode? A few years ago I knew it didn't. With the changes in Nvidia Surround I thought I'd revisit the question again.

No, the 3D glasses and monitor are polarized at an angle. If you rotate the monitors into portrait then they turn completely black when looking through the glasses.

cybereality wrote:

BHawthorne wrote:Anyone know if it supports 2x1 spanning? Is this 900-series specific or will it work on 700-series too?

Looks like 1 x 2 and 2 x 1 are options (I have 980). I didn't click on them since I like my setup and my computer just got jacked up trying to mess with it (I'm just happy it works now, so I'll leave it alone).

NVS.jpg

BHawthorne wrote:Slightly OT but doesn't hurt to ask, anyone know if the current Nvidia 3D Vision Surround works in portrait mode? A few years ago I knew it didn't. With the changes in Nvidia Surround I thought I'd revisit the question again.

No, the 3D glasses and monitor are polarized at an angle. If you rotate the monitors into portrait then they turn completely black when looking through the glasses.

Excellent to know 2x1 is an option for GTX980. Definitely the information I was looking for.

That might be so for LCD, but I'm talking projector where there is no polarized screen. I'm used to Nvidia 3D Vision Surround with triple Optoma GT720. Looking to upgrade in either 2015 or 2016 to Laser-LED projectors that'll allow portrait orientation mounting. That 1920 pixel height on portrait sounds very appealing for projector users. Adding in 3D Vision Kit would just be icing on the cake.

A few years ago when I last checked 3D Vision Kit in portrait the driver would lock the option out saying it's not available. I'm mostly curious to see if the option is still locked out. Projector would be fine with 3D Vision Kit portrait, but the driver might not be ok with it still.

I gave it a go, but unfortunately the stereo 3D settings disappear when in portrait Surround. Sorry.

No worries, was pretty much expecting it. Very good to see the new 2x1, 4x1 and 5x1 options though. That puts things in parity with Eyefinity. It's always been an issue with 2x1 because I'd have to expalin why AMD Eyefinity was able to do 2x1, 3x1, 4x1 and 5x1 but Nvidia was only able to do 3x1. That went on for years. Glad to see that Nvidia is caught up again. Makes it less confusing for me to explain spanning mode options for projectors now.

There is no option and NEVER will be for 3D Vision to work in 3D Surround with Monitors...
A LCD is refreshed Top->Bottom. Putting each monitor 90 degrees shifted will mean this rule breaks...
The way 3D Surround works is by making a huge resolution and one logical screen on which ONE Refresh rate is applied across the WHOLE Surround Virtual Screen.

If you try to do this in portrait mode you can't unless you HAVE monitors that can refresh in Left->Right (or Right->Left)... With projectors this is not the case...
Its basically a functional limitation.... Think about it:)

You guys keep on mentioning these silly things called monitors.

A bit of a follow up for completeness sake. We now know 2x1, 3x1, 4x1 and 5x1 is viable on Nvidia Surround. Is 2x2 and 3x4 available too?

Wow, that's one less reason to keep with AMD, now if only they had an option to map a wide gamut lcd to s-rgb like AMD does. Then they would have feature parity.

I'm using Nvidia Surround 2x1 right now on my GTX770 347.52 drivers. Never would of thought that would happen. It's a welcome surprise. Makes me wonder how it finally came about since it pretty much doesn't look like anything about WSGF brought it about.

Anyone knows if Mixed resolution works with nVidia now as well? I Really want to go to the green side but I need mixed resolution surround.