Page 1 of 1
Do either AMD or NVIDIA support 1 monitor at 120hz and 2 at 60hz?
Posted: 30 Mar 2012, 14:37
by Falesh
I would really like to keep my centre monitor at 120hz but add two side ones at 60hz to save some cash. Is this possible with either of the latest cards from both companies?
Sadly this will not work in
Posted: 30 Mar 2012, 16:44
by Delphium
:welcome
Sadly this will not work in Eyefinity/surround mode as they create a single large surface, so to windows this appears as 1 monitor, with 1 refresh rate, so all displays require the same refresh rate.
However if you wanted to play a game on a single monitor, you could run 60/120/60hz as monitors 1/2/3, then switch to 60/60/60 when using eyefinity/surround mode.
All ATI series 5xxx and above will drive 3 monitors from 1 card, and only the latest nvidia 680 is able to run 3 monitors off a single card, all previous generation nvidia cards would require an additonal nvidia card in SLI configuration.
Drat, I don't think I can
Posted: 30 Mar 2012, 17:27
by Falesh
Drat, I don't think I can justify buying 2 more 120hz monitors just for a little extra smoothness in games. I suppose it would be dubious if I could get significantly more then 60fps using 3 screens too... Thanks for the info.
Delphium wrote:Sadly this
Posted: 30 Mar 2012, 17:31
by alimao
:welcome
Sadly this will not work in Eyefinity/surround mode as they create a single large surface, so to windows this appears as 1 monitor, with 1 refresh rate, so all displays require the same refresh rate.
However if you wanted to play a game on a single monitor, you could run 60/120/60hz as monitors 1/2/3, then switch to 60/60/60 when using eyefinity/surround mode.
All ATI series 5xxx and above will drive 3 monitors from 1 card, and only the latest nvidia 680 is able to run 3 monitors off a single card, all previous generation nvidia cards would require an additonal nvidia card in SLI configuration.
thank you. my english is bad. tried this same question in another topic. the User to create this topic. asked the same question. more detailed and explanatory
any one of these settings with the monitors.
Dell UltraSharp U2312HM 23 60hz Dell Alienware OptX AW2310 23 120hz Dell UltraSharp U2312HM 23 60hz
LG E2360V 60hz Dell Alienware OptX AW2310 23 120hz LG E2360V 60hz
LG IPS236V 60hz Dell Alienware OptX AW2310 23 120hz LG IPS236V 60hz
all configurations would work , setting all monitors 60hz
ok ?
alimao, it is ok to have any
Posted: 30 Mar 2012, 18:49
by Falesh
alimao, it is ok to have any of those monitor configurations as long as you set them all to 60hz. The issue is that you cannot run the 120hz monitor at 120hz while having the others at a different refresh rate.
alimao][quote=Delphium
Posted: 30 Mar 2012, 19:56
by Haldi
[quote]
Dell UltraSharp U2312HM 23 60hz Dell Alienware OptX AW2310 23 120hz Dell UltraSharp U2312HM 23 60hz
LG E2360V 60hz Dell Alienware OptX AW2310 23 120hz LG E2360V 60hz
LG IPS236V 60hz Dell Alienware OptX AW2310 23 120hz LG IPS236V 60hz
all configurations would work , setting all monitors 60hz
ok ?
That SHOULD work! there might still be the problem that they use different internal timings... but don't know how much of a problem this could be....
but they should work!
It's VERY MUCH Possible.
Posted: 30 Mar 2012, 20:07
by suiken_2mieu
It's VERY MUCH Possible. There was a guy on [H]ardForum that running a CRT at 100Hz in the middle of two 60Hz LCD's. All while in Eyefinity.
His Post shows the CRT running at 100Hz.
This Post may also be of interest. 85Hz in the middle, with 60Hz Sides.
This Also.
Full thread of the above.
Enjoy.
Interesting. Well, whether it
Posted: 30 Mar 2012, 22:35
by Falesh
Interesting. Well, whether it does or doesn't I'll still be getting the two 60hz monitors so I'll post back here with my success or failure in a few months time.