Widescreen Gaming Forum

Hey all

First time poster long time reader :) I recently bought myself a Samsung MD230X3 and got a MSI R6970 Lightning to power it. After setting it up and playing games for a bit i noticed the horizontal scrolling line on my display port monitor, after researching i found this is a known issue. It this true? can i fix it? or should i go to nvidia surround to get rid of it? or is there a card i can get to stop this tearing? Thanks in advance for any reply's.

Sadly, this isn't a resolved issue.

Currently running 2x 6970s. Perhaps someone else has solved this, but I haven't heard of a resolution yet.

Hey all

First time poster long time reader :) I recently bought myself a Samsung MD230X3 and got a MSI R6970 Lightning to power it. After setting it up and playing games for a bit i noticed the horizontal scrolling line on my display port monitor, after researching i found this is a known issue. It this true? can i fix it? or should i go to nvidia surround to get rid of it? or is there a card i can get to stop this tearing? Thanks in advance for any reply's.

What I have been told is that the tearing is a result of using non-identical video signals. That is, if you want to eliminate tearing you have to provide the exact same connection to all of the displays. Since AMD video cards can only support up to 2 monitors natively, in order to accomplish for 3 screens you would have to provide DP connections to all three screens. This likely would be accomplished using a DP Hub that provides connections to multiple monitors.

In order to minimize the tearing during gaming I make sure the DP-connected monitor is one of the side screens and not the center one.

What about the cards with 4 display port connections? would that fix the issue?
`

What about the cards with 4 display port connections? would that fix the issue?
`

The only information I have is that all of the monitors have to be using the same kind of connection. So, if you can get all of them connected via DisplayPort, I can only assume it would solve the problem. But, I'm not able to test it out due to lack of hardware of that configuration.

Using the Asus DCII 6950/6970 (triple slot card with 4 x DP and 2 x DVI) will sort the issue if you hook up DP monitors to the DP ports only. Likewise hooking up 3 DP monitors to the DP ports on the 6990 will sort the issue too.

I have 5 DP monitors hooked up to my 6990. I have no tearing on the 4 monitors hooked up to the DP ports. I do have that line on the DVI monitor. Not an issue for me tho as it's the one on the left so hardly noticed.

Thanks for the responses. Might as wait for the new edition of cards to come out.

I had to create an account just so I could help.

I first bought a Sapphire 2gb 6950 Dirt 3 Edition and had this issue with tearing. It was extremely annoying. So to resolve this, and also since I wanted a bit better of performance, I bought the ASUS 2gb 6950 DCII Edition and ran all three of my monitors via DisplayPort (Dell U2311h monitors), using the Dirt 3 card as my second crossfire card. Works FANTASTIC.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814121431&Tpk=asus%206950

Also, both of them unlocked to 6970 shaders. :)

I had to create an account just so I could help.

I first bought a Sapphire 2gb 6950 Dirt 3 Edition and had this issue with tearing. It was extremely annoying. So to resolve this, and also since I wanted a bit better of performance, I bought the ASUS 2gb 6950 DCII Edition and ran all three of my monitors via DisplayPort (Dell U2311h monitors), using the Dirt 3 card as my second crossfire card. Works FANTASTIC.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814121431&Tpk=asus%206950

Also, both of them unlocked to 6970 shaders. :)

As I stated above, all monitors need to be using the same type of connection in order to avoid tearing on any "odd" connected display. This is a known issue to AMD and they state there is no method to correct this due to how the signals are sent to the displays.

Is this as simple as using VGA connection to all three monitors?

Display port can be adapted to VGA, as can the other ports. Do you mean that all monitor's ports need to be the same native type?

Is this as simple as using VGA connection to all three monitors?

Display port can be adapted to VGA, as can the other ports. Do you mean that all monitor's ports need to be the same native type?

Not sure what your understanding of "native type" is, but, all I know is what I've been told by AMD contacts who have direct access to the driver team. It is my understanding that, as long as an adapter is in use on any, but not all, of the displays, that vacates the "same connection" requirement. So, if one has enough DP ports and is using the same type adapters on ALL of the displays, that meets the requirement. But, if any display is connected differently, that one will show the tearing. This is why I place my DP-connected monitor off to one side so that my gaming focus on the center screen isn't significantly distracted by the tearing.

You're more than welcome to see if you can get all of the displays connected using VGA. It may do the trick, but, I'd be pleasantly surprised if it does.

When buying a cutting edge card take a close look at the dimensions. Sometimes these are so large that they won't fit into your PC case. With the high end models you will find that their capacity is much greater than any current games can use. They aren't made for today's games they are made to supply graphic resources to future games. The 2 big graphic card brands are GeForce and Radeon. Some gamers will tell you GeForce is the way to go, while others swear Radeon cards are the best. I recommend trying to match your needs to the card's stats and ignoring the brand.
Sapphire Radeon HD 5970 ATI Video Card
The Sapphire uses ATI Stream technology that accelerates even the most demanding of applications. This card is also able to fully support Microsoft's DirectX 11. It uses cutting edge technology to enhance the performance. This includes advanced 2GB/512-bit GDDR5 memory interface, 40nm Processor Technology, 2nd Generation TeraScale Engine, PCI 2.0 x16 bus interface. These features enhance the performance by providing better speed. It also uses dynamic power management for efficient use of resources. This is done through the ATI PowerPlay technology.
Zotac GeForce GTX 480
The Zotac is NVIDIA's flagship video card. The Zotac uses advanced cinematic effects like motion blur and depth of field. All these factors combine to produce a 3D world that is very realistic. This effect is further reinforced NVIDIA PhysX effects. The NVIDIA Phys on this card runs at twice the speed of previous models. The only problem with this card is the heat management. What that means is that the fan works at 100% at all times and produces a lot of noise. This can be a bit irritating. Water cooling can be used to get rid of the problem. The combination of excellent features delivers amazing performance and graphics. The ray traced 3D rendering enables realistic images. The high speed anti-aliasing ensures that any and all ragged edges are smoothed out.
View more at: http://www.techyv.com/questions/nvidia-or-ati-radeon-graphic-card