Widescreen Gaming Forum

hey all.

Got the Cat10.3 betas installed.

Cant fond the thing to add bezel managemnt anywhere!!!!

All my Screens are 24" 1920x1200

Exact same sized pannels

Please help me out

Hey there,

Go to CCC>graphics>desktop and displays>click on "configure" (black triangle on display group)>display group>configure bezel compensation

Good luck.

Its not there for me :(

I have 3 diffrent model Montitors, this be the issue?

Its not there for me :(

I have 3 diffrent model Montitors, this be the issue?

Yes that appears to be the case. :(

http://www.widescreengamingforum.com/forum/viewtopic.php?f=64&t=18597

Come on guys!

This is the Widescreen gameing forum!!!!!!!

We can find a solution!

*i nearly killed my monitor editing the EDID... soo i wont do that myself again lol*

Come on guys!

This is the Widescreen gameing forum!!!!!!!

We can find a solution!

*i nearly killed my monitor editing the EDID... soo i wont do that myself again lol*

Yeah im in the same situation, got 1 BenQ 24 and two BenQ 22 and i dont really dare to edit EDID but i guess i will have to =(

*i nearly killed my monitor editing the EDID... soo i wont do that myself again lol*

Heh, me too.

I really hope ATI remove the restriction in 10.3 release, if not then at least a quick hotfix that removes it. I know I took the risk, but someone out there is going to mess up their monitor and they are going to blame ATI for it.

It's a major feature. And locking some people out of it, causing them to take a risky route just seems counter productive to me.

... just wait for the official release ...

Those available drivers are not even supported ... How could Ati be blamed of anything in regards of those 'obscur' drivers...

Some with identical screens are having the same issue, some with different screens are able to use the new fonction properly, others not including myself ...

We are not even supposed to be able to download these 'beta' drivers ....

We just need to be patient I guess...


Bleco

hey all.

Got the Cat10.3 betas installed.

Cant fond the thing to add bezel managemnt anywhere!!!!

All my Screens are 24" 1920x1200

Exact same sized pannels

Please help me out

Here's what I did to make mine work.....and it works like a dream.....no editing needed of EDID.
Download the 10.3 beta.
Remove your current Catalyst driver in add/remove
Restart in SafeMode
Go into My Computer and remove any files you can find that have anything to do with ATI.
Now run DriverCleaner a couple of times.
Restart and install the 10.3 Preview, you should get the bezel compensation pop-up just after you create the EyeFinity group profile.

I have two Dell 2408 and one Dell 2410 and am using W7 Professional x64.

[quote]hey all.

Got the Cat10.3 betas installed.

Cant fond the thing to add bezel managemnt anywhere!!!!

All my Screens are 24" 1920x1200

Exact same sized pannels

Please help me out

Here's what I did to make mine work.....and it works like a dream.....no editing needed of EDID.
Download the 10.3 beta.
Remove your current Catalyst driver in add/remove
Restart in SafeMode
Go into My Computer and remove any files you can find that have anything to do with ATI.
Now run DriverCleaner a couple of times.
Restart and install the 10.3 Preview, you should get the bezel compensation pop-up just after you create the EyeFinity group profile.

I have two Dell 2408 and one Dell 2410 and am using W7 Professional x64.

Interesting. Did this work for anyone else?

Interesting. Did this work for anyone else?

Pretty much. When I tried to install my 3 monitors (one samsung 275t, and two 275t+) with the 10.3b already installed, the bezel option wasn't there. I had to remove the drivers, and reinstall them. But there was no need to go into safe mode, or use driver cleaner.

problem is Those monitors listed are all the same size within there EDID...

hence its working

But he LP2745, Dell 2407 and Dell 2408 are all diffrent sizes :P when infact they are the same lols

Their issue wasn't that the EDID was different (it's the image size in the EDID that matters, not just different monitors), it was probably that the Control panel in cat 10.3 beta being 5 days older than the latest cat 10.2. So for some, CCC from cat 10.3 beta weren't installed correctly until they uninstall previous CCC and clean out the drivers.

Doing this, and I've done it many times before it was discovered that differing EDID image size disables bezel management, won't do anything for some of us.

Damn, so we still gotta wait for ATI to provide some sorta workaround then huh.

Guys, vote here.
http://forums.amd.com/game/messageview.cfm?catid=279&threadid=130099

Hope ATI support will understand reality of this problem

Here's what I did to make mine work.....and it works like a dream.....no editing needed of EDID.
Download the 10.3 beta.
Remove your current Catalyst driver in add/remove
Restart in SafeMode
Go into My Computer and remove any files you can find that have anything to do with ATI.
Now run DriverCleaner a couple of times.
Restart and install the 10.3 Preview, you should get the bezel compensation pop-up just after you create the EyeFinity group profile.

I have two Dell 2408 and one Dell 2410 and am using W7 Professional x64.

I exactly did this way to install official 10.3 (using DriverSweeper) and still no have bezel management (see my sig for hardware details) and others problems with games...
After a couple of tests and benchmarks, i decide to revert to 10.2.
So disappointed, bezel management is one of great feature that i'm waiting for.

If someone could help, thanks in advance...

Hallelujah !

Official 10.12 with new CCC2 finally bring me bezel management.

At now my games are working fine in Eyefinity (AC1, AC2, PoP Forgotten Sands, Pop 2008).

Others games tests in progress...

Edit : Here are some pictures of games that i've tested :

Prince of Persia - Forgotten Sands

Bezel OFF


Bezel ON


Prince Of Persia 2008

Bezel OFF


Bezel ON


Assassin's Creed II

Bezel OFF


Bezel ON