Widescreen Gaming Forum

Hi all

Currently I can not get above 3840X1024.
Does the cables from the TH2Go unit to the monitors have to be Dual Link in order to get higher resolutions?

Here is what I have done in the Wizard

Set up an existing Matrox product. TH2Go DE is in the drop down down box. Next >
TripleHead and Install triple wide-screen modes are both checked. Next >
Manually select mode. Wide-screen modes: 1440x900 per monitor (output refresh rate: 60Hz) Next >
Then on the following page it list the following.
[list][*]Matrox Product:
TripleHead2Go Digital Edition[/*:m]
[*]Graphics hardware:
NVIDIA GeForce GTX 285[/*:m]
[*]Windows display used for Matrox Product:
Display 1[/*:m]
[*]Input used:
Digital[/*:m]
[*]Monitor 1:
ACR Acer X263W (Digital) on connector 1.[/*:m]
[*]Monitor 2:
ACR Acer X263W (Digital) on connector 2.[/*:m]
[*]Monitor 3:
ACR Acer X263W (Digital) on connector 3.[/*:m]
[*]Display setup:
3 displays, Stretched mode[/*:m]
[*]Use Matrox product as primary display:
No[/*:m]
[*]Display mode to apply:
1440x900 per monitor (output refresh rate: 60Hz)[/*:m][/list:u]I then click Next >
Everything gets a green check mark up until;
Applying Mode. At this point I get a red X, A Windows error has occurred

I know my monitors will do 1440x900@60Hz. And this is actually less pixels then 1280x1024x3 anyway. So I would think it should work, since I can get 3840x1024@60Hz.

I also get the same error if I try to select 1680x1050 per monitor (output refresh rate: 55Hz)
I don't remember if 55Hz is supported by my monitors or not. I do believe it is only 50, 59 and 60 that was in the list when I was checking them before my unit came.

So, I don't know if it is due to my cables going to the monitors, something with Vista or a user mistake in the above setup options that causes this. My cables are DVI to HDMI, but the DVI isn't dual link.
Any ideas?

Okay, one more question, please:
Is there anyway to not use Bezel Management for normal windows operation, but use it for games? Is there a setting I am overlooking to setup the Bezel Management to apply ONLY when a game is launched?

For my use that's the only time I would need it on. In Windows I would like it off, since it causes text and such to be behind the bezels, if you know what I mean.

I'm running Vista Ultimate x64 SP2.
NVIDIA Driver 185.85

Thank you for any help or suggestions.
Bye for now :)
Butch

Hi Butch_N!!!

There are problems with your driver! The last known working one is 182.50!!
(or the 190.15, but its not released officially, and i got probs with it)

If you install the 182.50, there will be no error!!!

During installation i choosed also 1440x900@60Hz, but after installing everything you can switch to 3x1680x1050@57Hz!!!

Bezelmanagement: give it a shortcut and before playing activate!!



Tobi

There are problems with your driver! The last known working one is 182.50!!
(or the 190.15, but its not released officially, and i got probs with it)

If you install the 182.50, there will be no error!!!

Yep, i was trying the 185.85 but no WTH, then installed 182.50 and its all fine.

Thanks guys

I will grab 182.50 and install it sometime today.
Thanks for the tip on Bezel Management. I will hunt the software for a setting up a shortcut key.

Yep, 185.58 is a PITA driver version. 182.50 is the answer. :wink:

Is it just that 185.58 "doesn't work" no matter what, or is it something more subtle? :?

Does the cables from the TH2Go unit to the monitors have to be Dual Link in order to get higher resolutions?

No; these cables can be single-link.

Is it just that 185.58 "doesn't work" no matter what, or is it something more subtle? :?

Doesnt work as there is an ongoing bug with nVidia's Custom Resolution Validation routine that started in the 185 series. Its working better in the 190 betas, but not even close to being fixed.

Thanks guys

182.50 is working for 4320x900@60Hz. I can't get 5040x1050@57Hz though. My monitors say Input Not Supported.

I haven't tried to set a lower refresh rate, yet. I may be out of luck there. But at least I now have proper aspect, so I can live with it.

But one game is not displaying any video at all with the 182.50 Driver. Test Drive Unlimited. It worked with 185.85 though. I even tried 3840x1024, but same thing. #2 and 3 monitors shut down and the #1 is a black screen. I get sound but no video at all, not even the logos.

I tried compatibility mode, but it didn't help.
And SGU v2.10 has never been able to find a config for that game, though I was able to select 3840x1024 in the games menu when using 185.85.

I found the Keyboard Shortcut for Bezel Management. I don't know how I missed that, :oops:

But one game is not displaying any video at all with the 182.50 Driver. Test Drive Unlimited. It worked with 185.85 though. I even tried 3840x1024, but same thing. #2 and 3 monitors shut down and the #1 is a black screen. I get sound but no video at all, not even the logos.

Have you tried to set your desktop res as 3840x1024 and then try to run TDU ? I dont have this game, but aside the drivers change you were running all games at a "native" 3840x1024 before, and now 4320x900 , maybe thats the problem. :wink:

Thanks, but yeah, I did set the desktop back to 3840x1024. I didn't make that part clear, but that's what I meant when I said I even tried 3840x1024. I even uninstalled the game and reinstalled it.

I think I will try to run the game with a single monitor only and see if it works with this driver.

Should I disable Matrox software from starting up with windows before I shut down the system to unhook TH2Go and hook up a single monitor?

Nah, you don't have to.

Thanks

I tried it and the game runs fine on a single screen, but I can't get it to work with this driver in triplehead. Even setting the res to 3840x1024, the game won't work. However, using the new 186.16, it works again, but that driver will not give 4320x900.
I think the game will only go as high as 3840x1024, but I'm not real sure, since that's all that I can get with the drivers that work for the game. I can't get into the games menu to check with 182.50.
However, I don't know why it wouldn't do that, since the game clearly supports 16:10 resolutions, such as 1920x1200, 1680x1050 and 1440x900. I checked when I had it running in on a single monitor.

After seeing TH2Go in proper aspect for my monitors, I don't want to go back to a stretched res for windows. I wouldn't mind at all if I had to run TDU in 3840x1024, but I for sure want my desktop in 4320x900.
All my other games that I have tried run at this res just fine. Only Rise of Flight doesn't have it in the list, but I understand that Neoqb is working with Matrox to resolve the issues with it. I have a strong feeling that it will offer 4320x900 once they get it straightened out.

I'm about to give up on it.
I wish (as I'm sure everyone does) that Nvidia would get on ball here. Absolutely no sense in this and really no excuse.

Hi again

Test Drive Unlimited is now working with 182.50, or I should say I now have a menu and correct resolution to match my desktop.

I have to uninstall it and delete everything I could find that related to it.
I had to get into the menu with my desktop at 640x480 (1920x480) in order for it to display. Once there I was able to set the res to 4320x900 and reset my desktop back to that res.
Logos don't display, but if I hit esc as soon as I hear the logo start, I get the menu to come up now.
I haven't tried to actually play, since my wheel wasn't hooked up, but at least I now have a menu and proper res. I think I may be okay.

However, a simple editable config file would have saved me a lot of problems and time.

I'll never get another console port if it doesn't have a config file we can edit.