HaYDeN wrote:Released FOV fix for Need for Speed: Rivals, Released new build of Flawless Widescreen (addresses yet more 64bit bugs, hopefully without introducing any new ones)
HaYDeN, is it possible to get the FoV Fine Adjustment working with the nose camera? ATM it doesn't appear to and I think the FoV is a little low, maybe.
Nose camera is technically correct, it uses a fixed vertical FOV hence it's HOR+, the FOV you see is the dev's intended FOV...
I was going to implement nose camera and a general camera position mod (X,Y,Z) but got on to other things for one, and because the rest of the game uses vertical FOV, the FOV increase for the nose camera would also impact every other view that is HOR+ already, eg. garage etc.
If your making a request, sure I'll add it - if your asking if it's technically correct as it is, yes it is.
It was a general request, although moving the camera onto the bonnet would be awesome so if you was planning on doing that I would say put a higher priority on that. I was just saying in my opinion the FoV on the nose cam looked a little low to be a correct natural FoV (IE the devs didn't change it when they ported it from the console to the PC), but I could be wrong, short of it being insanely low I often don't notice.
I've just bought CS:GO and saw that the fix for it is not working at all for me. Am I doing something wrong or is it outdated? I'd really appreciate a fix. please!
Just wanted to say massive thank you to Hayden for the newest updates of : FlashBack and Injustice gods among us, they both seem like hard fixes and the fix results look amazing on multi. If you have not checked them out it is totally worth it they look so good on multi screen.
Amon Amarth wrote:Big thanks to Hayden for the Assassin's Creed IV fix!
I'm guessing that this fixes the black bars only for 4:3 and 16:10 ratios because in 21:9 there are still black bars that take up 60%+ of the screen. Hi, long time reader, first time poster.
Do you guys know how to use flawless widescreen? Everytime when I launch the games, it always said " Searching for the games process, please configure desired setting and launch the game", but I do launch the game, this is very frustrating, please someone help me!
ChadSun1231 wrote:Do you guys know how to use flawless widescreen? Everytime when I launch the games, it always said " Searching for the games process, please configure desired setting and launch the game", but I do launch the game, this is very frustrating, please someone help me!
Open the debug window, Settings->Console Window...
It should show the reason as to why it cannot open the process, it's most likely a user issue (user your logged in as) or a permissions issue... someone a long time ago said they couldn't use it unless your logged in as Administrator (even if your sub-user has admin priv's)?
Do report back... as I'd like to fix it but I don't really have the time right this instant to go creating testing accounts etc etc.
Hey HaYDeN, can you comment on whether or not you will ever re-add the fixes for Borderlands and GTA: San Andreas? I've asked before but never got a response.
IIRC they disappeared when you released that big update to the program a while ago.
EVGA GeForce GTX 970 SC ACX 2.0 3.5GB | 3 X LG Flatron 24EA53VQ in Nvidia Surround | Optoma HD20
As Hayden has been amazing again, is it possible to update the site to list Assassin's Creed 4, as it's not supported by Flawless Widescreen?
I have some screens and what not and I'd like to gather info on the game's widescreen capabilities.
EDIT:
Ubisoft released a patch for AC4 which completely broke the game for 21:9 2560x1080 monitors. Now it goes into full multi-monitor surround mode and looks like this:
Gosh I'm embarrassed to ask this, but I've tried EVERYTHING and can't seem to get this to work.
So I've scoured the interwebs, googles, went to the Flawless webpage, Downloaded both flawless and widescreen fixer just to test and nope nothing works...clearly a setup issue and I was hoping the brain trust here might have a solution for me.
I've been using eyefinity now for a few years (AT 7970 (single)). I did a reinstall of my system (like to keep it cleaned up every few years). Anyway Flawless (and widescreen) both worked...flawlessly (pun). After the re-install of the system...not so much on ANY GAME on EITHER PROGRAM.
I installed all the pre-requisites 2010 redistributes both x64/x86. And Frameworks (I have 3.5 and 4.0 installed actually).
Both programs detect the current (bezel) corrected resolutions and both inject..but the game just showes up on all three monitors (1920x1080). No matter what drivers I am using or what settings I have on either program or game..doesn't matter. If the game DOES support eyefinity the game runs fine (dues ex, Deadspace and so forth)....so I know it's a system thing...any suggestions....driving me nuts.
Hayden, is there any chance you can check your L.A. Noire plugin for FWS for any errors? Because whenever I install said plugin on v1.0.12 x64, the program starts refusing to respond to and/or do ANYTHING. It can't even do something as simple as a regular repo update check without something going wrong. For some reason, this faulty plugin also prevents other installed plugins from doing their job as long as it's around.
maestroofmusic wrote:Both programs detect the current (bezel) corrected resolutions and both inject..but the game just showes up on all three monitors (1920x1080). No matter what drivers I am using or what settings I have on either program or game..doesn't matter. If the game DOES support eyefinity the game runs fine (dues ex, Deadspace and so forth)....so I know it's a system thing...any suggestions....driving me nuts.
Which game are you having trouble with?
I've seen something similar on my friend's computer with AC4, and the solution was: 1) Make sure he had non-bezel corrected resolution set for the desktop 2) Go into the game and set it to the non-bezel corrected resolution 3) Reset the game settings to the bezel corrected resolution 4) Relaunch the game
I've noticed that since the last Core update that my previously loaded plugins no longer reload themselves after the program is closed and launched again - though I only close it on a restart. Was this intentional?
Ah, that did it. I also has 1.0.12 before and now that I've uninstalled/reinstalled, the interface is a bit different, and everything loads as it was previously. Stupid me for not thinking to do that in the first place.
I have Flawless Widescreen set to load on startup, but every time the UAC prompt comes up in Windows. How can I disable this prompt each time the PC boots? I've tried setting the "Run this program as an administrator" option under the "Compatibility" box for the .exe but that had no effect. I don't want to disable UAC on the whole PC, but can't see what other options I have open to me? Help, please...
Lufferov, I used the built-in Windows Task Scheduler to do this. I can't remember the exact guide I used, but this one looks like it has what you need.
Hayden, is there any chance of you adapting your KOTOR fix to work on the second game? Would be most appreciative since I've now been spoiled by flawless triplewide on the first. I'm happy to donate a copy on Steam if you don't have it.
"Personally, I see it as a virtue - trying to make the world a slightly better place _without_ trying to impose your moral values on other people. You do whatever the h*ll rings your bell, I'm just an engineer who wants to make the best OS possible." - Linus Torvalds
