Widescreen Gaming Forum

Longpig7 wrote:
However on an different issue (not sure where to post this), I am able to access WSGF from everywhere except my home (unless using 4g on my phone). I get a 500 server error regardless of what page i try to get to on WSGF. Does anybody have any suggestions.
I'm on Optus cable. WSGF is included in my white list. Thanks for any help you guys can offer.

Any ideas?

Gamefreak3333 wrote:Just whipped this up myself using Haldi tutorial on editing .ba2 files.

Gimmie a heads up if you find any errors, but it seems to be working ok on my end

for (5760x1080)

I have a 5mb limit for uploading, so unfortunately I had to split it into multiple archives

When I try to multi extract this with 7Zip it says it is missing part 6. HOWEVER - the file works! THANK YOU!!

phlimm wrote:When I try to multi extract this with 7Zip it says it is missing part 6. HOWEVER - the file works! THANK YOU!!

I tried downloading it from another computer and it downloaded fine, if anyone else gets a missing part 6 as well, please let me know and I will re-upload.

Gamefreak3333,
This WORKED for me.

Thank you, you are the man!

phlimm wrote:I really hope we can get a fix or at least instructions on how to fix for this soon, it is unplayable ATM.

Instructions are placed all over this whole thread
There are about 25 files and 150 lines of code to modify for all the fixes we found.
With Aspect ratio, centered hud, green background shades...

Gamefreak3333 wrote:Just whipped this up myself using Haldi tutorial on editing .ba2 files.

Gj.
Let me see if I can edit your post in Tapatalk and upload the file as one.
... When I find a WiFi, not gonna download 22mb via 384kbits xD

Edit: nope, only pictures allowed in Tapatalk. Will try via homepage when I'm in a WiFi which is not blacklisted for spaming ^^

I have just extracted all the files to the correct folder using Win-RAR and all appears o.k.
Al my thanks to Gamefreak3333

Gamefreak3333 wrote:Just whipped this up myself using Haldi tutorial on editing .ba2 files.

Gimmie a heads up if you find any errors, but it seems to be working ok on my end

for (5760x1080)

I have a 5mb limit for uploading, so unfortunately I had to split it into multiple archives

Hey probably is newb question but I see that you have 5 different files to extract. Is there any way you can give an install how to because I'm assuming that all of these 5 files I'm going to have to merge as 1 Ba2 file and then replace Haldi's Old Fix. How would I go about doing that? I've downloaded WinMerge but it goes off on the deep end when it comes to me using it! Could you explain the steps needed to do in order for your fix to work??

Thank You and Much Appreciated!!!!

Can't wait to get my game going again!!!!!!!!!!!!!!!!

MrGrim wrote:

Gamefreak3333 wrote:Just whipped this up myself using Haldi tutorial on editing .ba2 files.

Gimmie a heads up if you find any errors, but it seems to be working ok on my end

for (5760x1080)

I have a 5mb limit for uploading, so unfortunately I had to split it into multiple archives

Hey probably is newb question but I see that you have 5 different files to extract. Is there any way you can give an install how to because I'm assuming that all of these 5 files I'm going to have to merge as 1 Ba2 file and then replace Haldi's Old Fix. How would I go about doing that? I've downloaded WinMerge but it goes off on the deep end when it comes to me using it! Could you explain the steps needed to do in order for your fix to work??

Thank You and Much Appreciated!!!!

Can't wait to get my game going again!!!!!!!!!!!!!!!!

Should be as simple as downloading all 5 and extracting any one of them (with winrar or whatever .rar extractor you use) . Its archived to search for the other files then extract. If there is an error in extracting its because you are missing one of the parts

Many thanks Gamefreak3333 for uploading, every time I get a chance to play some FO4 steam go and break it with an update

I'm having an issue with the scope:





Does anyone know whats up with this? Apart from the ba2 file, should I change somerthing else? My res is 5760 x 1080.


Thanks in advance.


G.

dr1v3n l1k3 stol3n wrote:Does anyone know whats up with this?

The blur effect or the squeezed scope?
Seems like someone did not a perfect job in fixing scopemenu.swf *SCNR*
The problem lies in the stretched hud due to the header edit and centering the scope.
To fix this you need to manually edit each and every scope to be in the center and NOT the whole scopemenu.swf
You need to incrementally increase the starting points and the middle of the scope in the svg file.
It's a PITA and takes forever.

Edit: I see I forgot to include this in the Tutorial I put on the first post.
If anyone finds my Post where I describe how to fix the scope please link it here.
Searching is extremely annoying in Tapatalk, or generally on Mobiles.

Many thanks Haldi, I will give a look for that post and give it a go when I get a chance... to be honest I may switch to iron sights for a while

Haldi wrote:

dr1v3n l1k3 stol3n wrote:Does anyone know whats up with this?

The blur effect or the squeezed scope?
Seems like someone did not a perfect job in fixing scopemenu.swf *SCNR*
The problem lies in the stretched hud due to the header edit and centering the scope.
To fix this you need to manually edit each and every scope to be in the center and NOT the whole scopemenu.swf
You need to incrementally increase the starting points and the middle of the scope in the svg file.
It's a PITA and takes forever.

Edit: I see I forgot to include this in the Tutorial I put on the first post.
If anyone finds my Post where I describe how to fix the scope please link it here.
Searching is extremely annoying in Tapatalk, or generally on Mobiles.

whoopsidoozle, check this groovy jam, Here is the fix, normally I run a scope mod, that changes the scopes. However included is the pic of my scope, and now the fixed default.

Gamefreak3333 wrote:

Haldi wrote:

dr1v3n l1k3 stol3n wrote:Does anyone know whats up with this?

The blur effect or the squeezed scope?
Seems like someone did not a perfect job in fixing scopemenu.swf *SCNR*
The problem lies in the stretched hud due to the header edit and centering the scope.
To fix this you need to manually edit each and every scope to be in the center and NOT the whole scopemenu.swf
You need to incrementally increase the starting points and the middle of the scope in the svg file.
It's a PITA and takes forever.

Edit: I see I forgot to include this in the Tutorial I put on the first post.
If anyone finds my Post where I describe how to fix the scope please link it here.
Searching is extremely annoying in Tapatalk, or generally on Mobiles.

whoopsidoozle, check this groovy jam, Here is the fix, normally I run a scope mod, that changes the scopes. However included is the pic of my scope, and now the fixed default.

Many thanks again Gamefreak, you sir are whats colloquially known as a bloody legend,

Simply way of extracting via Win-Rar
1, Create a folder to store the archive files.
2, Download the five archive files into the folder.
3, Highlight all files.
4, Right click and select "open" (or open with if Win-Rar is not associated and select Win_Rar)
5, In Win-Rar select extract and point it to the created folder.
6, Re-name the existing BA2 file in the Fallout 4 "Data" folder.
7, Copy the created BA2 file into the Fallout 4 "Data" folder.
I know this seems obvious but it may help.

Impressive.
Gj

Haldi wrote:

phlimm wrote:I really hope we can get a fix or at least instructions on how to fix for this soon, it is unplayable ATM.

Instructions are placed all over this whole thread
There are about 25 files and 150 lines of code to modify for all the fixes we found.
With Aspect ratio, centered hud, green background shades

So I found the instructions because now with the new DLC of course Interfaces is broken again. I am able to extract everything and modify the values.

BUT reimporting seems to do nothing. The interface file "Date Modified" does not change, and I don't see any change in gameplay. As a test I changed the background color for the BarterMenu to red (255,51,51). I saved my change then ran the reimport. None of the file attributes changed. So then I extracted what should have been the modified Interfaces file and the background color for BarterMenu was 51,51,51.

I am using the tutorial posted here. I use the F option for Force when it comes up and am importing all the swfs, not just the ones that were edited.

Any ideas as to what is wrong? None of the files show as read only.

Try a different working folder. Make sure the originl file doesnt exist anymore

Gesendet von meinem LENNY2 mit Tapatalk

Haldi wrote:Try a different working folder. Make sure the originl file doesnt exist anymore

I did move the working folder. If I delete the original file, it gives me an error. Yes, this is when I am trying to reimport the swf's back into the ba2.

phlimm wrote:new DLC of course Interfaces is broken again..

My old interface.ba2 I uploaded still works you just have to re-copy it back into the data folder.

However dont let that stop you from learning how to fix it yourself

Gamefreak3333 wrote:

phlimm wrote:new DLC of course Interfaces is broken again..

My old interface.ba2 I uploaded still works you just have to re-copy it back into the data folder.

However dont let that stop you from learning how to fix it yourself

Yes, that's what I am trying to do. So when reintegrating, you remove the original that you extracted?