Page 3 of 4
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 08 Jun 2013, 03:53
by Wishthink
helifax wrote:Wishthink wrote:I'd love some help with my problems. IN GAME looks fine as far as I've tried it, but the menu looks HORRIBLE.
Resolutions 2400 or so less look normal (unless i turn on the fix at which point the text takes a deep angle). Anything above 2400 or less than 5700 you can still notice the difference, but i can't take ANY pictures of.
Any resolution higher than 2400 or so just gives me all black when i print screen it. Haven't tried with fraps yet, but regular paint and paste it is complete black.
At 5754 X 1082 (only suggesting it gives me above 4000) i see NO difference with or without the patch fix.
Either way the menu is completely zoomed in and stretched out. The top part of the menu is completely cut off the screen. The top of the menu can't even be seen.
Is this the
steam version ? or ..something different? By the looks of it..you are not using a legit steam version or is not patched...
This resolution is very weird 5754 X 1082.....are you in window mode ? ...or ?
Fixed already -didn't even realize this post made it through the whole "there is no topic" error.
It's a legit steam version. The weird resolution was because i didn't realize it was in windowed mode. Not sure what fixed it. I deleted the "fixer" (accidentally). Re-downloaded it. Re-downloaded the dll and everything works perfectly. I'm guessing i had an old DLL or something.
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 08 Jun 2013, 14:04
by helifax
Wishthink wrote:helifax wrote:Wishthink wrote:I'd love some help with my problems. IN GAME looks fine as far as I've tried it, but the menu looks HORRIBLE.
Resolutions 2400 or so less look normal (unless i turn on the fix at which point the text takes a deep angle). Anything above 2400 or less than 5700 you can still notice the difference, but i can't take ANY pictures of.
Any resolution higher than 2400 or so just gives me all black when i print screen it. Haven't tried with fraps yet, but regular paint and paste it is complete black.
At 5754 X 1082 (only suggesting it gives me above 4000) i see NO difference with or without the patch fix.
Either way the menu is completely zoomed in and stretched out. The top part of the menu is completely cut off the screen. The top of the menu can't even be seen.
Is this the
steam version ? or ..something different? By the looks of it..you are not using a legit steam version or is not patched...
This resolution is very weird 5754 X 1082.....are you in window mode ? ...or ?
Fixed already -didn't even realize this post made it through the whole "there is no topic" error.
It's a legit steam version. The weird resolution was because i didn't realize it was in windowed mode. Not sure what fixed it. I deleted the "fixer" (accidentally). Re-downloaded it. Re-downloaded the dll and everything works perfectly. I'm guessing i had an old DLL or something.
Yes, I think you were using the first release of the plugin;)) Glad that it works now;))
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 01:30
by ThoughtA
Thanks for all the fixes you provide, Helifax! Using r652 with the plugin you included in this thread, everything worked perfectly. I updated to r662 today and now all menu items are shifted to the left. I'll post some screenshots below.




This includes the .ini fix. I imagine the .ini fix is still necessary, but I'm not sure if I missed something and was supposed to disable that with r662.
Edit: Replacing the plugin from r662 with the one linked in this thread did not change anything. Reverting to r652 and adding the plugin you linked in this thread solves my problem. I mostly just wanted to post for anyone else who had an issue and so you'd be aware.
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 01:46
by helifax
ThoughtA wrote:Thanks for all the fixes you provide, Helifax! Using r652 with the plugin you included in this thread, everything worked perfectly. I updated to r662 today and now all menu items are shifted to the left. I'll post some screenshots below.




This includes the .ini fix. I imagine the .ini fix is still necessary, but I'm not sure if I missed something and was supposed to disable that with r662.
Edit: Replacing the plugin from r662 with the one linked in this thread did not change anything. Reverting to r652 and adding the plugin you linked in this thread solves my problem. I mostly just wanted to post for anyone else who had an issue and so you'd be aware.
That is very weird... I tested the latest WSF release and I find the plugin working like before.
How is your plugin configured?
If is on
autodetect you should use the same resolution both in windows and in-game.
If you are using different resolutions try to
manually configure the plugin.
That should solve the problem.
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 02:36
by ThoughtA
I'm a moron. My steam folder is in another partition, and I forgot to set the FOV override path after installing the new version. Sorry about that, and thanks for all the work you do!
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 02:53
by helifax
ThoughtA wrote:I'm a moron. My steam folder is in another partition, and I forgot to set the FOV override path after installing the new version. Sorry about that, and thanks for all the work you do!
Nothing to worry about:) Glad that you got it working;))
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 03:59
by fluxetreflux
Hi guys,
Thanks to Helifax for the fix. But RM crash to desktop when i'm using WidescreenFixer-r662 maybe or maybe not i need r652 with the last plugin as someone said just before.But can't find a dl url for this version
Here's my problem : when i launch game with widescreen fixer in backround as usual, games starts fine, but as soon as i activate the fix : game crash to desktop and here is what i can read :
"Fatal error!
Address =0161111b (filename not found) in .\Path...\Rememberme.exe)"
FYI i'm still using the "another release" with no update.
Thanks in advance
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 13:11
by morxy49
fluxetreflux wrote:Hi guys,
Thanks to Helifax for the fix. But RM crash to desktop when i'm using WidescreenFixer-r662 maybe or maybe not i need r652 with the last plugin as someone said just before.But can't find a dl url for this version
Here's my problem : when i launch game with widescreen fixer in backround as usual, games starts fine, but as soon as i activate the fix : game crash to desktop and here is what i can read :
"Fatal error!
Address =0161111b (filename not found) in .\Path...\Rememberme.exe)"
FYI i'm still using the "another release" with no update.
Thanks in advance
I've got the exact same error.
neither 5760x1080 or 6048x1080 works.
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 15:25
by fluxetreflux
morxy49 wrote:I've got the exact same error.
neither 5760x1080 or 6048x1080 works.
Thanks for you reply. Do you mean that i need to lower the res ?
But i'm quite despite that the fix can't run @ full res. Yesterday i give it a go, with the BaseEngine.ini trick and except the menu, "3D Arrows" that indicates your direction, Combo Labs, HUD,etc... it was running as smooth as butter and so impressive
There's aslo an issue with framerate when Crossfire is on. I have no problem when it's off. I'm running two 5770 (i know this is quite old !) with 13.6 beta and no cap. Am i alone with this problem ?
Waiting for others advices... Thanks for your help
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 15:58
by helifax
fluxetreflux wrote:morxy49 wrote:I've got the exact same error.
neither 5760x1080 or 6048x1080 works.
Thanks for you reply. Do you mean that i need to lower the res ?
But i'm quite despite that the fix can't run @ full res. Yesterday i give it a go, with the BaseEngine.ini trick and except the menu, "3D Arrows" that indicates your direction, Combo Labs, HUD,etc... it was running as smooth as butter and so impressive
There's aslo an issue with framerate when Crossfire is on. I have no problem when it's off. I'm running two 5770 (i know this is quite old !) with 13.6 beta and no cap. Am i alone with this problem ?
Waiting for others advices... Thanks for your help
The fix works on all resolution et all.However I see from the above post that you are using a "cracked version" of the game.
Cracked versions are not supported nor will they be in the future for any fix that I make.
I am not going to open an old debate on why I decided this, but I think is pretty obvious.
As the WideScreen Fixer plugin says..the currently supported version is
Steam V1.1.0
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 16:16
by fluxetreflux
Ok thanks for your reply anyway, i will buy a second game so. My legit steam version is on my nVidia Rig

Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 09 Jun 2013, 16:48
by Skid
helifax wrote:fluxetreflux wrote:morxy49 wrote:I've got the exact same error.
neither 5760x1080 or 6048x1080 works.
Thanks for you reply. Do you mean that i need to lower the res ?
But i'm quite despite that the fix can't run @ full res. Yesterday i give it a go, with the BaseEngine.ini trick and except the menu, "3D Arrows" that indicates your direction, Combo Labs, HUD,etc... it was running as smooth as butter and so impressive
There's aslo an issue with framerate when Crossfire is on. I have no problem when it's off. I'm running two 5770 (i know this is quite old !) with 13.6 beta and no cap. Am i alone with this problem ?
Waiting for others advices... Thanks for your help
The fix works on all resolution et all.However I see from the above post that you are using a "cracked version" of the game.
Cracked versions are not supported nor will they be in the future for any fix that I make.
I am not going to open an old debate on why I decided this, but I think is pretty obvious.
As the WideScreen Fixer plugin says..the currently supported version is
Steam V1.1.0
You don't need to open an old debate, the WSGF will not condone or support piracy, and as such we will not allow developers to encourage or support piracy via the WSGF site.
So really there nothing to discuss, the site will not allow it

Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 11 Jun 2013, 09:20
by fluxetreflux
I finally grab my second copy of the game for my eyefinity rig !
Gave it a test yesterday and it's working flawlessly with the fix. Just noticed two "bugs" with the HUD. Here are some snapshots (taken with my phone) to illustrate...

WidescreenFixer ON

WidescreenFixer OFF

WidescreenFixer ON

WidescreenFixer OFF

WidescreenFixer OFF
And i saw on
Remember me Skid's blog that the bug is there.
If we had a "patch" for that, the fix would be just perfect even if it is already well and many thanks Helifax to make it possible.
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 11 Jun 2013, 14:12
by helifax
fluxetreflux wrote:I finally grab my second copy of the game for my eyefinity rig !
Gave it a test yesterday and it's working flawlessly with the fix. Just noticed two "bugs" with the HUD. Here are some snapshots (taken with my phone) to illustrate...

WidescreenFixer ON

WidescreenFixer OFF

WidescreenFixer ON

WidescreenFixer OFF

WidescreenFixer OFF
And i saw on
Remember me Skid's blog that the bug is there.
If we had a "patch" for that, the fix would be just perfect even if it is already well and many thanks Helifax to make it possible.
Hey, I know I am aware of that bug...
Unfortunately the game doesn't use the "standard way" o having ONE HUD..instead it is split into various elements. In the fix I managed to fix the main menus, and the MAIN hud, however the "secondary one" (hopefully) like you showed is still not fixed.
Due to the nature of how UE3 works it is still hard to find it... I haven't given up hope on it just yet, although I did spend yesterday half the day trying to fix it with no results...
I will try again in the future when I will have more time for it:)
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 11 Jun 2013, 18:59
by fluxetreflux
Hi,
I didn't know anything about Unreal Ungine, but yesterday i "googled" about HUD and found this
http://udn.epicgames.com/Three/HUDTechnicalGuide.html
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 11 Jun 2013, 19:39
by lilkeos
http://lilkeos.deviantart.com/art/Fout- ... lkeos&qo=0this is what I see when I start the game what will I do to fix this???
greetings ewout from holland
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 12 Jun 2013, 13:11
by Toothless Spoon
I was wondering where the health bar was, and thought wow the game is pretty hud-less

Makes it a little tricky in fights not knowing how low your health is, but all good, maybe Helifax can fix it.
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 12 Jun 2013, 14:20
by helifax
lilkeos wrote:http://lilkeos.deviantart.com/art/Fout-377313863?q=in%3Ascraps%20sort%3Atime%20gallery%3Alilkeos&qo=0
this is what I see when I start the game what will I do to fix this???
greetings ewout from holland
I see that error is generated by the game when trying to start (the D9 calls) and apparently cannot create a shader program.
Are you using a laptop? with optimus technology?
Make sure your game tries to use the GPU and not the Intel integrated chipset.
I don;t have any other idea why this error might appear... Is your DirectX up to date?
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 12 Jun 2013, 14:54
by fluxetreflux
Toothless Spoon wrote:I was wondering where the health bar was, and thought wow the game is pretty hud-less

Makes it a little tricky in fights not knowing how low your health is, but all good, maybe Helifax can fix it.
I had the same opinion as you about the difficulty but I now cover progress in the game in surround mode and I realize that this gauge is still useful to know what kind of combos you must focus on.
But I have faith in the genius of Helifax !

lilkeos wrote:http://lilkeos.deviantart.com/art/Fout-377313863?q=in%3Ascraps%20sort%3Atime%20gallery%3Alilkeos&qo=0
this is what I see when I start the game what will I do to fix this???
greetings ewout from holland
May i ask you if you are using a legit copy of the game ?
Re: "Remember Me" - Any fix for Eyefinity/Surround?
Posted: 13 Jun 2013, 22:51
by r9800pro
The game was updated again on Steam yesterday to 1.0.2056.0. The fix is not working anymore