"Remember Me" - Any fix for Eyefinity/Surround?

User created game mods, skins, texture packs and camera tools
Wishthink
Posts: 2
Joined: 07 Jun 2013, 23:04

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by Wishthink »

helifax wrote:
Wishthink wrote:I'd love some help with my problems. IN GAME looks fine as far as I've tried it, but the menu looks HORRIBLE.

Resolutions 2400 or so less look normal (unless i turn on the fix at which point the text takes a deep angle). Anything above 2400 or less than 5700 you can still notice the difference, but i can't take ANY pictures of.

Any resolution higher than 2400 or so just gives me all black when i print screen it. Haven't tried with fraps yet, but regular paint and paste it is complete black.

At 5754 X 1082 (only suggesting it gives me above 4000) i see NO difference with or without the patch fix.

Either way the menu is completely zoomed in and stretched out. The top part of the menu is completely cut off the screen. The top of the menu can't even be seen.


Is this the steam version ? or ..something different? By the looks of it..you are not using a legit steam version or is not patched...

This resolution is very weird 5754 X 1082.....are you in window mode ? ...or ?


Fixed already -didn't even realize this post made it through the whole "there is no topic" error.

It's a legit steam version. The weird resolution was because i didn't realize it was in windowed mode. Not sure what fixed it. I deleted the "fixer" (accidentally). Re-downloaded it. Re-downloaded the dll and everything works perfectly. I'm guessing i had an old DLL or something.
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by helifax »

Wishthink wrote:
helifax wrote:
Wishthink wrote:I'd love some help with my problems. IN GAME looks fine as far as I've tried it, but the menu looks HORRIBLE.

Resolutions 2400 or so less look normal (unless i turn on the fix at which point the text takes a deep angle). Anything above 2400 or less than 5700 you can still notice the difference, but i can't take ANY pictures of.

Any resolution higher than 2400 or so just gives me all black when i print screen it. Haven't tried with fraps yet, but regular paint and paste it is complete black.

At 5754 X 1082 (only suggesting it gives me above 4000) i see NO difference with or without the patch fix.

Either way the menu is completely zoomed in and stretched out. The top part of the menu is completely cut off the screen. The top of the menu can't even be seen.


Is this the steam version ? or ..something different? By the looks of it..you are not using a legit steam version or is not patched...

This resolution is very weird 5754 X 1082.....are you in window mode ? ...or ?


Fixed already -didn't even realize this post made it through the whole "there is no topic" error.

It's a legit steam version. The weird resolution was because i didn't realize it was in windowed mode. Not sure what fixed it. I deleted the "fixer" (accidentally). Re-downloaded it. Re-downloaded the dll and everything works perfectly. I'm guessing i had an old DLL or something.


Yes, I think you were using the first release of the plugin;)) Glad that it works now;))
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
ThoughtA
Posts: 3
Joined: 09 Aug 2012, 00:33

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by ThoughtA »

Thanks for all the fixes you provide, Helifax! Using r652 with the plugin you included in this thread, everything worked perfectly. I updated to r662 today and now all menu items are shifted to the left. I'll post some screenshots below.

Image
Image
Image
Image

This includes the .ini fix. I imagine the .ini fix is still necessary, but I'm not sure if I missed something and was supposed to disable that with r662.

Edit: Replacing the plugin from r662 with the one linked in this thread did not change anything. Reverting to r652 and adding the plugin you linked in this thread solves my problem. I mostly just wanted to post for anyone else who had an issue and so you'd be aware.
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by helifax »

ThoughtA wrote:Thanks for all the fixes you provide, Helifax! Using r652 with the plugin you included in this thread, everything worked perfectly. I updated to r662 today and now all menu items are shifted to the left. I'll post some screenshots below.

Image
Image
Image
Image

This includes the .ini fix. I imagine the .ini fix is still necessary, but I'm not sure if I missed something and was supposed to disable that with r662.

Edit: Replacing the plugin from r662 with the one linked in this thread did not change anything. Reverting to r652 and adding the plugin you linked in this thread solves my problem. I mostly just wanted to post for anyone else who had an issue and so you'd be aware.



That is very weird... I tested the latest WSF release and I find the plugin working like before.
How is your plugin configured?
If is on autodetect you should use the same resolution both in windows and in-game.
If you are using different resolutions try to manually configure the plugin.
That should solve the problem.
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
ThoughtA
Posts: 3
Joined: 09 Aug 2012, 00:33

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by ThoughtA »

I'm a moron. My steam folder is in another partition, and I forgot to set the FOV override path after installing the new version. Sorry about that, and thanks for all the work you do!
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by helifax »

ThoughtA wrote:I'm a moron. My steam folder is in another partition, and I forgot to set the FOV override path after installing the new version. Sorry about that, and thanks for all the work you do!


Nothing to worry about:) Glad that you got it working;))
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
fluxetreflux
Posts: 56
Joined: 15 Feb 2010, 16:40

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by fluxetreflux »

Hi guys,

Thanks to Helifax for the fix. But RM crash to desktop when i'm using WidescreenFixer-r662 maybe or maybe not i need r652 with the last plugin as someone said just before.But can't find a dl url for this version

Here's my problem : when i launch game with widescreen fixer in backround as usual, games starts fine, but as soon as i activate the fix : game crash to desktop and here is what i can read :

"Fatal error!
Address =0161111b (filename not found) in .\Path...\Rememberme.exe)"

FYI i'm still using the "another release" with no update.

Thanks in advance
User avatar
morxy49
Posts: 15
Joined: 22 Sep 2011, 19:52

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by morxy49 »

fluxetreflux wrote:Hi guys,

Thanks to Helifax for the fix. But RM crash to desktop when i'm using WidescreenFixer-r662 maybe or maybe not i need r652 with the last plugin as someone said just before.But can't find a dl url for this version

Here's my problem : when i launch game with widescreen fixer in backround as usual, games starts fine, but as soon as i activate the fix : game crash to desktop and here is what i can read :

"Fatal error!
Address =0161111b (filename not found) in .\Path...\Rememberme.exe)"

FYI i'm still using the "another release" with no update.

Thanks in advance


I've got the exact same error.
neither 5760x1080 or 6048x1080 works.
NZXT H2 | Intel Core i5-2500K @ 3.3 GHz | Vengeance 8 GB @ 1333Mhz | ASUS P8P67 Pro Rev B3 | Asus Radeon HD 6870 DirectCU 1GB | Corsair HX650W | CM Hyper 212+ | Crucial M4 128 GB | 2x2TB HDD

Logitech G510 | Razer Deathadder Respawn | Steelseries Qck+ |
fluxetreflux
Posts: 56
Joined: 15 Feb 2010, 16:40

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by fluxetreflux »

morxy49 wrote:I've got the exact same error.
neither 5760x1080 or 6048x1080 works.


Thanks for you reply. Do you mean that i need to lower the res ?

But i'm quite despite that the fix can't run @ full res. Yesterday i give it a go, with the BaseEngine.ini trick and except the menu, "3D Arrows" that indicates your direction, Combo Labs, HUD,etc... it was running as smooth as butter and so impressive :shock:

There's aslo an issue with framerate when Crossfire is on. I have no problem when it's off. I'm running two 5770 (i know this is quite old !) with 13.6 beta and no cap. Am i alone with this problem ?

Waiting for others advices... Thanks for your help
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by helifax »

fluxetreflux wrote:
morxy49 wrote:I've got the exact same error.
neither 5760x1080 or 6048x1080 works.


Thanks for you reply. Do you mean that i need to lower the res ?

But i'm quite despite that the fix can't run @ full res. Yesterday i give it a go, with the BaseEngine.ini trick and except the menu, "3D Arrows" that indicates your direction, Combo Labs, HUD,etc... it was running as smooth as butter and so impressive :shock:

There's aslo an issue with framerate when Crossfire is on. I have no problem when it's off. I'm running two 5770 (i know this is quite old !) with 13.6 beta and no cap. Am i alone with this problem ?

Waiting for others advices... Thanks for your help


The fix works on all resolution et all.
However I see from the above post that you are using a "cracked version" of the game. Cracked versions are not supported nor will they be in the future for any fix that I make.
I am not going to open an old debate on why I decided this, but I think is pretty obvious.
As the WideScreen Fixer plugin says..the currently supported version is Steam V1.1.0
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
fluxetreflux
Posts: 56
Joined: 15 Feb 2010, 16:40

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by fluxetreflux »

Ok thanks for your reply anyway, i will buy a second game so. My legit steam version is on my nVidia Rig :roll:
User avatar
Skid
Administrators
Administrators
Posts: 1031
Joined: 02 Nov 2009, 12:14
Location: Lincoln, UK
Contact:

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by Skid »

helifax wrote:
fluxetreflux wrote:
morxy49 wrote:I've got the exact same error.
neither 5760x1080 or 6048x1080 works.


Thanks for you reply. Do you mean that i need to lower the res ?

But i'm quite despite that the fix can't run @ full res. Yesterday i give it a go, with the BaseEngine.ini trick and except the menu, "3D Arrows" that indicates your direction, Combo Labs, HUD,etc... it was running as smooth as butter and so impressive :shock:

There's aslo an issue with framerate when Crossfire is on. I have no problem when it's off. I'm running two 5770 (i know this is quite old !) with 13.6 beta and no cap. Am i alone with this problem ?

Waiting for others advices... Thanks for your help


The fix works on all resolution et all.
However I see from the above post that you are using a "cracked version" of the game. Cracked versions are not supported nor will they be in the future for any fix that I make.
I am not going to open an old debate on why I decided this, but I think is pretty obvious.
As the WideScreen Fixer plugin says..the currently supported version is Steam V1.1.0


You don't need to open an old debate, the WSGF will not condone or support piracy, and as such we will not allow developers to encourage or support piracy via the WSGF site.

So really there nothing to discuss, the site will not allow it :)
: ) Skid : )
My Multi-Monitor Focused YouTube Channel: http://www.youtube.com/c/SkidIncGaming
My Twitch channel which I've been known to stream on from time to time: http://www.twitch.tv/SkidInc
"Imagination is the only weapon in the war against reality."
fluxetreflux
Posts: 56
Joined: 15 Feb 2010, 16:40

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by fluxetreflux »

I finally grab my second copy of the game for my eyefinity rig !

Gave it a test yesterday and it's working flawlessly with the fix. Just noticed two "bugs" with the HUD. Here are some snapshots (taken with my phone) to illustrate...

Image
WidescreenFixer ON

Image
WidescreenFixer OFF

Image
WidescreenFixer ON

Image
WidescreenFixer OFF

Image
WidescreenFixer OFF

And i saw on Remember me Skid's blog that the bug is there.

If we had a "patch" for that, the fix would be just perfect even if it is already well and many thanks Helifax to make it possible.
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by helifax »

fluxetreflux wrote:I finally grab my second copy of the game for my eyefinity rig !

Gave it a test yesterday and it's working flawlessly with the fix. Just noticed two "bugs" with the HUD. Here are some snapshots (taken with my phone) to illustrate...

Image
WidescreenFixer ON

Image
WidescreenFixer OFF

Image
WidescreenFixer ON

Image
WidescreenFixer OFF

Image
WidescreenFixer OFF

And i saw on Remember me Skid's blog that the bug is there.

If we had a "patch" for that, the fix would be just perfect even if it is already well and many thanks Helifax to make it possible.


Hey, I know I am aware of that bug...
Unfortunately the game doesn't use the "standard way" o having ONE HUD..instead it is split into various elements. In the fix I managed to fix the main menus, and the MAIN hud, however the "secondary one" (hopefully) like you showed is still not fixed.
Due to the nature of how UE3 works it is still hard to find it... I haven't given up hope on it just yet, although I did spend yesterday half the day trying to fix it with no results...
I will try again in the future when I will have more time for it:)
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
fluxetreflux
Posts: 56
Joined: 15 Feb 2010, 16:40

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by fluxetreflux »

Hi,

I didn't know anything about Unreal Ungine, but yesterday i "googled" about HUD and found this

http://udn.epicgames.com/Three/HUDTechnicalGuide.html
lilkeos
Posts: 1
Joined: 11 Jun 2013, 19:24

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by lilkeos »

http://lilkeos.deviantart.com/art/Fout- ... lkeos&qo=0

this is what I see when I start the game what will I do to fix this???

greetings ewout from holland
Toothless Spoon
Insiders
Insiders
Posts: 516
Joined: 01 Sep 2010, 11:38

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by Toothless Spoon »

I was wondering where the health bar was, and thought wow the game is pretty hud-less :P Makes it a little tricky in fights not knowing how low your health is, but all good, maybe Helifax can fix it.
起死回生 (kishi kaisei) Wake from death and return to life..
User avatar
helifax
Insiders
Insiders
Posts: 1232
Joined: 21 May 2011, 14:18

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by helifax »

lilkeos wrote:http://lilkeos.deviantart.com/art/Fout-377313863?q=in%3Ascraps%20sort%3Atime%20gallery%3Alilkeos&qo=0

this is what I see when I start the game what will I do to fix this???

greetings ewout from holland


I see that error is generated by the game when trying to start (the D9 calls) and apparently cannot create a shader program.
Are you using a laptop? with optimus technology?
Make sure your game tries to use the GPU and not the Intel integrated chipset.

I don;t have any other idea why this error might appear... Is your DirectX up to date?
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]
fluxetreflux
Posts: 56
Joined: 15 Feb 2010, 16:40

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by fluxetreflux »

Toothless Spoon wrote:I was wondering where the health bar was, and thought wow the game is pretty hud-less :P Makes it a little tricky in fights not knowing how low your health is, but all good, maybe Helifax can fix it.


I had the same opinion as you about the difficulty but I now cover progress in the game in surround mode and I realize that this gauge is still useful to know what kind of combos you must focus on.

But I have faith in the genius of Helifax ! :rockout:

lilkeos wrote:http://lilkeos.deviantart.com/art/Fout-377313863?q=in%3Ascraps%20sort%3Atime%20gallery%3Alilkeos&qo=0

this is what I see when I start the game what will I do to fix this???

greetings ewout from holland


May i ask you if you are using a legit copy of the game ?
r9800pro
Posts: 33
Joined: 21 Jun 2012, 02:53

Re: "Remember Me" - Any fix for Eyefinity/Surround?

Post by r9800pro »

The game was updated again on Steam yesterday to 1.0.2056.0. The fix is not working anymore
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests