Page 3 of 14

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 04 Nov 2008, 01:34
by TCR
Great idea guys, thanks. I'm setting up a new rig and it's decision time on the monitors so this is helpful.

Unfortunately most of the models listed so far seem to be slightly older monitors, so it makes it hard when looking to buy current models that are compatible.

has anyone bought any current model 22" monitors that are known to work?

Looks like the list needs a little updating as well.

KNOWN WORKING :
Viewsonic VX1940w


Known Working: Asus VK222H


Thanks, Paul.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 04 Nov 2008, 09:52
by Falke
KNOWN WORKING

Samsung 226BW

edit 11-09-2008:
My 226BW needed to get repaired. I am not aware if this is due to use at 57hz, so i would not buy this one, maybe a problem

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 04 Nov 2008, 12:41
by TCR
Thanks.

Nice monitor too, just a bit out of my price range :(

Any more?

Paul.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 05 Nov 2008, 08:34
by TCR
KNOWN WORKING

Samsung 226BW


Ok, seeing as the choice seems limited, I'm thinking of stretching the budget a bit to get 3 of these to run @5040x1050.

Can you confirm for me that they run at 57Hz in this configuration without any problems?

Do you have the warning message about "not running in a standard resolution" that seems to be an issue with some other Samsung models?

Thanks, Paul.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 07 Nov 2008, 08:38
by TCR
OK, this is becoming very frustrating.

I have some money burning a hole in my pocket and I want to buy 3/22" widescreens that will work at 5040 x 1050 at 57Hz.

I've been through the list on first page and any other monitors mentioned in this topic but so far this is what i have:

ACER P223W: Questionable quality?

CHIMEI CMV22ID: Never heard mcuh of them but as far as I can make out not a highly recommended brand.

DELL E22WFP: Good quality BUT I have recieved an email back from DELL tech support saying that none of their 22" widescreens will work at 57Hz.

LG L227WTG: This model doesn't appear to be available in Aus. Even so LG doesn't appear to have the best name?

SAMSUNG 225BW: Another brand with a good name however every model seems to have the annoying warning message.

VIEWSONIC VX2235WM: Once again don't seem to have the best name in terms of quality.

ASUS VK222H: I thought they had a decent name but could be wrong. I've tried to contact ASUS support to confirm compatibility but no luck. Even though the specs look ok I know there has been problems with other ASUS monitors with similar specs.

And that's it. If anyone can shed any light on some of the brands I labelled "questionable" in terms of quality I'm all ears.

Help me spend my money please :)

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 08 Nov 2008, 04:56
by geniv2
WORKING:

SOYO DYLM24E6 24" monitor works fine with 5040x1050.

22" AG Neovo H-W22 Widescreen LCD

Posted: 08 Nov 2008, 20:07
by Fr0g9y
22" AG Neovo H-W22 Widescreen LCD

Add this one to the list that does not support 5040x1050 @ 57hz

Max resolution is was able to run at was 4320 x 900 (3 x 1440 x 900) 60Hz

The picture quality of these monitors looks pretty bad when not using there native 1680x1050 resolution. To bad as they are only £135 a pop from Scan.

If your looking for a monitor for TripleHead i would stay well clear of these monitors.

Already RMA'd back to Scan.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 10 Nov 2008, 07:32
by TCR
Ok, so I've now had two email replies from Dell and Samsung saying that none of their 22" widescreen moniotrs will run at 1680x1050 at 57Hz, yet there are people here that say they work "straight out of the box".

Is it a matter of "forcing" the monitors to run at that resolution by creating a custom resolution or something?

If so, is there any chance of long term damage in doing this, as they obviously aren't designed to run at 57Hz?

Paul.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 10 Nov 2008, 10:23
by Mud
It's just ignorance on the part of the company representatives...why would anyone want to use 57Hz? Up until recently there was no reason at all, and Matrox gear (or the recent firmware update) are not common knowledge.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 11 Nov 2008, 00:43
by mattsimis
Known (confirmed) working:


3 22"s running at 5040x1050 57hz

Dell 2208WFP (Rev A01)
Zalman Trimon 22" ZM-M220W


Only issue Ive found is the Dells cannot handle more than 80pixels Bezel Management without distortion and shrinkage on both sides of the image (instead of just side opposite to the center)


EDIT, just saw this:
OK, this is becoming very frustrating.

I have some money burning a hole in my pocket and I want to buy 3/22" widescreens that will work at 5040 x 1050 at 57Hz.

snip

DELL E22WFP: Good quality BUT I have recieved an email back from DELL tech support saying that none of their 22" widescreens will work at 57Hz.

snip




I would wager no Tech Support agent from any PC company would answer you truthfully, they are just closing your "awkward" ticket with a simple and easy "no".

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 11 Nov 2008, 01:07
by Mud


Only issue Ive found is the Dells cannot handle more than 80pixels Bezel Management without distortion and shrinkage on both sides of the image (instead of just side opposite to the center)



This sounds like it's really this issue...correct me if I'm wrong.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 11 Nov 2008, 16:55
by mattsimis
[quote]

Only issue Ive found is the Dells cannot handle more than 80pixels Bezel Management without distortion and shrinkage on both sides of the image (instead of just side opposite to the center)



This sounds like it's really this issue...correct me if I'm wrong.

Last night I confirmed its only the left screen, so yep, its the same issue as that thread.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 14 Nov 2008, 01:26
by geniv2
Just got 3 24" benq monitors

NOT WORKING
BENQ G2400WD



the screen goes blank when I switch to 1050 :(

sucks since the specs

it say Image Frequency is 50-85hz

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 14 Nov 2008, 01:37
by TCR
I know this has also been an issue with some of the Asus monitors. Unfortunately it seems you can't always trust what the specs say.

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 15 Nov 2008, 19:38
by Mystic5hadow
CONFIRMED WORKING:
ViewSonic VA2226w

Got three of'em set up and they work just fine =3

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 15 Nov 2008, 19:54
by Paddy the Wak
Mystic5hadow ... welcome to the forum ... :D

From the profile page ...
Signature:
Use this block of text to display your system specs. There is a 512 character limit. Please no images.

Please keep the text (colored text is fine) between sizes 9 and 11 (using BB Code). Run your specs horizontally (rather than vertically), and limit to four lines at normal forum width.


Please change yours ... 8)

Hanns-g Hi221D and samsung syncmaster 225bw

Posted: 24 Nov 2008, 23:29
by preposterous
Both work just fine with softTH. The quality of the hanns-g I found superior to the syncmaster....cheaper too!

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 25 Nov 2008, 01:06
by TCR
Confirmed working:

Viewsonic VX2240w

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 26 Nov 2008, 23:01
by Membrain
Dell 2007WFP - Does not support 57Hz

Dell 2009W - DOES support 57Hz


...now to get rid of my 2 2007WFP's... :cry:

Monitors that will and won't run at 5040x1050 @ 57hz

Posted: 30 Nov 2008, 15:48
by Electrix
DGM L-2249WD Works perfectly! Review here