Fallout 4 Eyefinity/Surround

[daragman]

thx for the reply Haldi.

I did edit the ini with 5916x1080, which is my bezel corrected res and set desktop to eyefinity bezel corrected res (5916x1080) but no go.

Strangely the whole shift to the left thing also happens with 4800x900 non bezel corrected. (again with the correct res in the ini as well)

It did work correctly with 5760x1080, but would like to use bezel correction.

I'm not able to make a screenshot for a couple of days cause i have part of my rig at a friends house this weekend for a FO4 get-together... But i'll do it somewhere next week and post back...

I'm sure i'll get it fixed someday, all the help here is great!

Then all that's left is Crossfire and SLI support.... 'cause unfortunately i really cant stand playing at 30ish fps.

[ins1337]

thx for the reply Haldi.

I did edit the ini with 5916x1080, which is my bezel corrected res and set desktop to eyefinity bezel corrected res (5916x1080) but no go.

Strangely the whole shift to the left thing also happens with 4800x900 non bezel corrected. (again with the correct res in the ini as well)

It did work correctly with 5760x1080, but would like to use bezel correction.

I'm not able to make a screenshot for a couple of days cause i have part of my rig at a friends house this weekend for a FO4 get-together... But i'll do it somewhere next week and post back...

I'm sure i'll get it fixed someday, all the help here is great!

Then all that's left is Crossfire and SLI support.... 'cause unfortunately i really cant stand playing at 30ish fps.

Hi mate,

In order to use any bezel corrected resolution you need to run the game in fullscreen windowed mode, as well as having your windows desktop resolution pre-set to the bezel corrected resolution.

Unfortunately as soon as you go into full screen (no idea why) the res is forced to 5760x1080 and shifted to the left an inch or two (as well as the pixels behind the bezels not rendering as if correction is off

[daragman]

thx for the reply Haldi.

I did edit the ini with 5916x1080, which is my bezel corrected res and set desktop to eyefinity bezel corrected res (5916x1080) but no go.

Strangely the whole shift to the left thing also happens with 4800x900 non bezel corrected. (again with the correct res in the ini as well)

It did work correctly with 5760x1080, but would like to use bezel correction.

I'm not able to make a screenshot for a couple of days cause i have part of my rig at a friends house this weekend for a FO4 get-together... But i'll do it somewhere next week and post back...

I'm sure i'll get it fixed someday, all the help here is great!

Then all that's left is Crossfire and SLI support.... 'cause unfortunately i really cant stand playing at 30ish fps.

Hi mate,

In order to use any bezel corrected resolution you need to run the game in fullscreen windowed mode, as well as having your windows desktop resolution pre-set to the bezel corrected resolution.

Unfortunately as soon as you go into full screen (no idea why) the res is forced to 5760x1080 and shifted to the left an inch or two (as well as the pixels behind the bezels not rendering as if correction is off

Thanks ins1337,

As soon as i have my eyefinity setup again i'll try this...

But uhm, does this mean that if this would be the permanent fix for bezel correction that CF and SLI will never work because of windowed mode??? IIRC CF and SLI dont work in windowed mode, correct?

And weird that the shifting also happens in non bezel corrected 4800x900. Or does this have something to do with the fact that it's just a res 'not recognized' by the game?

Sorry if my questions sound silly, but i'm sorta tech savvy, just not high level like you guys...

[fenriswlf1]

Just tossed some cheder Haydens way. Must be a tough nut to crack it's been awhile. Thanks in advance for your work.

Cheers.

[GallingSiren]

Hey is there something I'm missing with the fix on page 20? I'm running 1280x1024x3 at 3840x1024, while the fix does fix most elements of the hud, my health and ammo are still on the far left and right respectively.
I've already edited the safe zone defaults but it seems like no matter how much I play with them my hud doesn't move at all.

[HanzDD]

Thanks for all your great work ... stupid Bethesda unable to even respond to our questions on the forum.

I use 5760x1200 Eyefinity and I used the "FIX" but i have little problem:



Menu for workstation (buildings) is a problem. Pictures in are too small ... any advice? the fix was made to 5760x1080 and I have 5760x1200. So maybe I should set up something a little different. Your advice please?

[Haldi]

I figured out how to remove the dark green boxes, at least from the HUD anyway. I'm guessing the process would be similar for other UI elements as well.
....................
Attached is the HUDMenu.swf with these edits applied.

Awesome! Thank you very much. I've modified the Favorites Menue and included that in a new Interface.ba2. Couldn't find anything in the MainMenu though seems like that's already on "false" have you taken a closer look at the main menu yet?

Outdated: use this: http://www.wsgf.org/forums/viewtopic.ph ... 12#p162512

Fallout4 - Interface.zip

(21.33 MiB) Downloaded 1662 times

edit: If you read this for the first time you're fine.
If you're someone from the first 7 downloaders please redownload the file

Menu for workstation (buildings) is a problem. Pictures in are too small ... any advice? the fix was made to 5760x1080 and I have 5760x1200. So maybe I should set up something a little different. Your advice please?

Yep, and i have absolutly no idea how to fix it.

Hey is there something I'm missing with the fix on page 20? I'm running 1280x1024x3 at 3840x1024, while the fix does fix most elements of the hud, my health and ammo are still on the far left and right respectively.
I've already edited the safe zone defaults but it seems like no matter how much I play with them my hud doesn't move at all.

Strange, are you sure it's the right .ini file? You should see the HUD moving.

[Deryan3]

a little help please,
I have done all the following but out of the 3 monitors i have the game is only playing on my middle and right monitor, wallpaper is still showing on my left. what do i need to do to have all 3 monitors working?

thank you in advance.

Are all your monitors the same physical size? I have one off sized on and I needed to adjust my Eyefinity (under Resize Desktop) to "Fit". When I tried "Expand", I got what you are describing except the right hand monitor was the one showing the desktop.

Yes they are all the same size.

UPDATE: curiously i moved my cursor to the top and dragged the window over to the left..... low and behold i now have 3 monitors working.... i dont know why it was starting like that, but its all good now... THANK YOU ALL for all the help i appreciate the suggestions, and appreciate the hard work you all do to figure these things out

[GallingSiren]

I totally was just messing with the wrong setting, I'm so sorry for the trouble! D:
But as long as I'm making posts instead of crawling around, is there anyway to fix the scoped in view so it's not so squished?

[TRusselo]

Haldi,

Do I just drop this file next to the other .ba1 files in the Data folder, and now remove the interface line edit from the ini file?

you replace the original .ba2 file and you still need the interface .ini edits to Center your hud !

Sorry I'm a bit lost. All I originally did was change 'sResourceDataDirsFinal=STRINGS\' to 'sResourceDataDirsFinal=STRINGS\, INTERFACE\' so that it picked up the modified .swf's. Now that im using your ba2 file I can just remove this cant I? And also delete the .swf's i put in the interface folder as they will just stop your ba2 from being used?

You mentioned a line to centre my hud? Which line is that. Everything seems to work okay for me except m,y health bar is on the bottom left of the left screen still.



edit: just looked back on this thread, is this what I need to do?

"Fallout4.ini" in myDocuments with the Line:
[Interface]
fSafeZoneX=250.0
fSafeZoneXWide=1300.0

edit2: yes it was, fixed! thanks!

Ok now IM CONFUSED....

my setup is 3 x 1440x900 16:10 / 4320x900

I edited my config... to this and a few other close numbers...
fSafeZoneX=210.0
fSafeZoneY=15.0
fSafeZoneXWide=1150.0
fSafeZoneYWide=15.0
fSafeZoneXWide16x10=1150.0
fSafeZoneYWide16x10=15.0

and i get

Untitled.png (4.49 MiB) Viewed 12058 times

Notice HP on the FAR right? AP shows on the LEFT??? backwards. but compass is not backwards... WTF???

with
fSafeZoneX=500.0
fSafeZoneY=15.0
fSafeZoneXWide=500.0
fSafeZoneYWide=15.0
fSafeZoneXWide16x10=500.0
fSafeZoneYWide16x10=15.0

they overlap

Untitled.png (3.93 MiB) Viewed 12051 times

[kraZ1]

So what have I done wrong ? When I start Fall Out 4 it is in the upper left corner of my screens so small I can't read anything.
I edited the file in Documents\My Games\Fallout4\Fallout4prefs. iSize W and iSize H to 5760 1080, changed the fSafeZoneX and fSafeZoneXWide in the Documents\My Games\Fallout4\Fallout4. Then renamed the file Fallout4 - Interface.ba2 to Fallout4 - Interface.old in the Program Files(x86)/Steam/steamapps/common/Fallout 4/Data folder and unzipped the latest Interface.ba2 file.
Is that what I should have done ?
OK so I figured that out after reading the entire thread. Now how do I change the FOV so I can read/write my name at the begining. Do I have to read this thread again?
Never realized how much I hate reading instructions, LOL. Now that I did everything is looking great !


MSI 970 Gaming-AMD FX 8350-G.Skill Sniper 16GB-MSI R9 390 Gaming 8GB-CoolerMaster Storm Sniper-Win7 64 (3) AOC e2343FK-5760x1080

[HanzDD]

Menu for workstation (buildings) is a problem. Pictures in are too small ... any advice? the fix was made to 5760x1080 and I have 5760x1200. So maybe I should set up something a little different. Your advice please?

Yep, and i have absolutly no idea how to fix it.

Ok, so Fallout 4 is unplayable now .... thnx for you help and try, but Bethesda are stupid idiots ...no gamedeveloping at all ... FA(i)llout 4 = FALLOUT 3 new skin, same problems and less RPG than FNW .... Bethesda dont deserved any money for this game ...

[jsdeprey]

I figured out how to remove the dark green boxes, at least from the HUD anyway. I'm guessing the process would be similar for other UI elements as well.
....................
Attached is the HUDMenu.swf with these edits applied.

Awesome! Thank you very much. I've modified the Favorites Menue and included that in a new Interface.ba2. Couldn't find anything in the MainMenu though seems like that's already on "false" have you taken a closer look at the main menu yet?

Fallout4 - Interface.zip

edit: If you read this for the first time you're fine.
If you're someone from the first 7 downloaders please redownload the file

Menu for workstation (buildings) is a problem. Pictures in are too small ... any advice? the fix was made to 5760x1080 and I have 5760x1200. So maybe I should set up something a little different. Your advice please?

Yep, and i have absolutly no idea how to fix it.

Hey is there something I'm missing with the fix on page 20? I'm running 1280x1024x3 at 3840x1024, while the fix does fix most elements of the hud, my health and ammo are still on the far left and right respectively.
I've already edited the safe zone defaults but it seems like no matter how much I play with them my hud doesn't move at all.

Strange, are you sure it's the right .ini file? You should see the HUD moving.

There is also issues when I read a note similar to when you are in workstation mode, it just very tiny and you can not read the text. But thanks for the work Haldi, it looks great really, the game it self has been amazing, I was playing last night and it started to rain and lighting across all 3 27" monitors and it looked great!

[Superbee726]

So i ran through the thread and fixes last night and I have to say, Damn! a Huge Thanks to everyone who has been helping out! I was hard pressed to find any major flaws with the hud, menu, pip boy etc.

However oddly enough, i hadn't personally experienced the "Dark bar" others were mentioned earlier in the thread, but after doing the fixes and running Surround i started getting that problem. I tend to get it indoors more than out, but it seems like it only happens in certain areas, and even then if i move around it appears and disappears depending where i'm standing and where i'm looking. I had it so bad in the Police Station that it actually made the area unplayable for me. having 2/3 of the screen constantly popping super dark like, then popping back to normal, that was game breaking enough i had to go back to single screen due to it pissing me off.
it was pretty close to some of the others who submitted pics, but mine actually seemed a bit worse, similar to this users pic

Did anyone figure out a fix for this? i've been flipping through the thread but i didn't see anything specific to this one, did i miss something?

Thanks

Ive been having this same problem. Clowekey from the 21:9 thread posted this.

Hello everyone.
I came across a fix for lighting bug which causes a "dark rectangle" to appear on your screen.
http://steamcommunity.com/sharedfiles/f ... =551651145

Change bComputeShaderDeferredTiledLighting=1 to 0 in your Fallut4Pref.ini

Remember to do this for both folders!

(C:\Users\[name]\Documents\My Games\Fallout4\)
AND
(steamapps\common\Fallout 4\Fallout 4)

Someone said that it changes the graphical appearance, but if anything has changed, I haven't noticed.

I personally haven't notice a difference in graphics. Im able to play the game now with all the fixes and no grey bar going across half my screen.

Yea this is what has been plauging the 3440 x 1440 users aside from the broken hud.

One thing I will say, all the users on reddit and steam forums that get this bug were running 780/780ti. A few with 980ti chimed in reporting they were NOT experiencing the dark screen. I'm at 3440x1440 with a 980ti but I haven't fired up the game yet.

Can I ask what GPU you're running?

sorry late to the party but yeah im running a 780ti @ 5817x1080

[CrazyLink1]

Hi guys, just created a profile for some help.

My game wont turn to 5760x1080 when I change it in the .ini file. I am getting all kinds of issues.


Can I please get help? What do I have to do step by step? And as for the fixed HUD that a fellow member on these forums made, can I also be told how to go about applying the fix?

Thanks in advance!

[MrGrim]

Hi guys, just created a profile for some help.

My game wont turn to 5760x1080 when I change it in the .ini file. I am getting all kinds of issues.


Can I please get help? What do I have to do step by step? And as for the fixed HUD that a fellow member on these forums made, can I also be told how to go about applying the fix?

Thanks in advance!

CrazyLink if you start reading from page 20 you'll see that all the steps have been established and you shouldn't have any problem from there.

[tonycubed2]

For anyone that wants to reprogram the keys, here is my AutoHotkey script, it only swaps the keys while the game is active, working great for me as I always use all the numpad keys to move, reload, open etc.

Running smooth as butter at 5760x1080 on a single 980Ti, ultra everything + SweetFx, so not sure why some of you are getting < 60 fps.

https://www.autohotkey.com
"Fallout4Keys.ahk"

#NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases.
SendMode Input ; Recommended for new scripts due to its superior speed and reliability.
SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory.

#IfWinActive ahk_exe Fallout4.exe
{
a::Numpad1
w::Numpad8
s::Numpad2
d::Numpad3

e::Numpad0
LCtrl::NumpadDiv
Tab::NumpadMult
f::NumpadAdd
g::Numpad9
v::Numpad5
q::Numpad7
r::NumpadDot

Numpad1::a
Numpad8::w
Numpad2::s
Numpad3::d

Numpad0::e
NumpadDiv::LCtrl
NumpadMult::Tab
NumpadAdd::f
Numpad9::g
Numpad5::v
Numpad7::q
NumpadDot::r
}

How do you use this? And does this assign movement keys to the arrow keys?

[CrazyLink1]

Hi guys, just created a profile for some help.

My game wont turn to 5760x1080 when I change it in the .ini file. I am getting all kinds of issues.


Can I please get help? What do I have to do step by step? And as for the fixed HUD that a fellow member on these forums made, can I also be told how to go about applying the fix?

Thanks in advance!

CrazyLink if you start reading from page 20 you'll see that all the steps have been established and you shouldn't have any problem from there.

I got the .ba2 file in there and I made the proper edits under interface. Now the only issue is that despite having my resolution set as 5760x1080 in my .ini file, the game shows up on one monitor, the other two are blacked out, and the resolution looks incredibly poor. And now with the new edits from the .ba2, the text is tiny until the game decides to actually show up on 3 monitors.

Mind you, this is with windowed and bordless disabled through the games start up launcher.

[Peer_Review]

Menu for workstation (buildings) is a problem. Pictures in are too small ... any advice? the fix was made to 5760x1080 and I have 5760x1200. So maybe I should set up something a little different. Your advice please?

Yep, and i have absolutly no idea how to fix it.

Ok, so Fallout 4 is unplayable now .... thnx for you help and try, but Bethesda are stupid idiots ...no gamedeveloping at all ... FA(i)llout 4 = FALLOUT 3 new skin, same problems and less RPG than FNW .... Bethesda dont deserved any money for this game ...

It's just the pictures you cant see, I just go to each category press up to go into the category, then over to what is needed and so on. When you pick something you'll see it in full size when you point it at any empty space. The picture being small doesn't actually stop you from building any thing. Also as you are looking at an empty space just move left to right and you'll shuffle through them all and see exactly what the picture was any way. It is irritating but not game breaking, all the words are readable. I'm saying this because I couldn't figure out what to do for like 5 minutes and almost Alt-F4'd the damn thing before I realized you had to press up to go into the category, and sub categories, and perhaps others might have that problem too.

[Haldi]

Mind you, this is with windowed and bordless disabled through the games start up launcher.

Delete both ini files, start the game in 1920x1080 single Monitor Fullscreen.
Switch to EF/Surround modify your ini resolution to 5760 width. And add the Safezone.