Widescreen Gaming Forum

Hitsui wrote:So, if I use this Aspect Ratio Patcher on my 2560 x 1080 monitor...set up the resolution on launcher to 1440p for example, it's done?

Yes, that would work. Just make sure to set the game to Fullscreen so it stretches down to your resolution.

Hopefully a good example:
For the screenshots in my first reply, I set the game to 4k but I have two 1440p monitors.(5120x1440)

Thank you so much, CivilWolf!

As soon as I test it, I will give my feedback here...

CivilWolf wrote:Nioh Aspect Ratio Patcher
This patcher edits the pixel aspect ratio in-game.


[Instructions]
1. Run the Patcher
2. Enter your aspect ratio or full resolution (Only affects pixel aspect ratio)
3. Set the game's resolution as high as you can.(Optional)
4. Run the game.



It does not change the resolution. FOV seems to scale with the aspect ratio.







Download:

Whenever I launch the program with the fix enabled, I get "application load error 3:0000065432"

TaintedSponge wrote:

CivilWolf wrote:Nioh Aspect Ratio Patcher
This patcher edits the pixel aspect ratio in-game.


[Instructions]
1. Run the Patcher
2. Enter your aspect ratio or full resolution (Only affects pixel aspect ratio)
3. Set the game's resolution as high as you can.(Optional)
4. Run the game.



It does not change the resolution. FOV seems to scale with the aspect ratio.







Download:

Whenever I launch the program with the fix enabled, I get "application load error 3:0000065432"

I am also getting the "application load error 3:0000065432"

I'm going to check it and see if I can fix it. Thanks for letting me know!

As awesome as this is, I'd hate to run my game at 4K just to get ultrawide 1440p visuals (or settle for 2560x1440). That's a lot of lost performance for something that should be avoided. Hopefully someone can find out how to set custom resolutions.

CivilWolf wrote:Nioh Aspect Ratio Patcher
This patcher edits the pixel aspect ratio in-game.


[Instructions]
1. Run the Patcher
2. Enter your aspect ratio or full resolution (Only affects pixel aspect ratio)
3. Set the game's resolution as high as you can.(Optional)
4. Run the game.



It does not change the resolution. FOV seems to scale with the aspect ratio.







Download:
Down for now. I'm going to try to fix it. It caused errors.

What's the black magic being done here? I tried as many hex values as I knew but could not figure out how to edit this game for the life of me. Not sure why errors were happening for others, it worked on my end.

Works great only problem is the HUD is stretched now, but i can live with that.

hi_voltg3 wrote:

CivilWolf wrote:*snip*

What's the black magic being done here? I tried as many hex values as I knew but could not figure out how to edit this game for the life of me. Not sure why errors were happening for others, it worked on my end.

I think I found the reason it probably works for the both of us. Did you happen to have already applied the other fix, before using mine?

I re-installed the game and I am crashing now.

For resolutions other than 21:9
The fix seems to be:
1. Apply StalkerUKCG's fixed .exe to your game folder.
2. Download the patcher:

3.Apply the patch.
4. Enjoy the game!

CivilWolf wrote:

hi_voltg3 wrote:

CivilWolf wrote:*snip*

What's the black magic being done here? I tried as many hex values as I knew but could not figure out how to edit this game for the life of me. Not sure why errors were happening for others, it worked on my end.

I think I found the reason it probably works for the both of us. Did you happen to have already applied the other fix, before using mine?

I re-installed the game and I am crashing now.

Yeah, the other fix is applied as well. When I was trying to hex edit the game before I was getting the same error as everyone else. I can get the launcher to display 3440x1440 but that doesn't matter since the game itself doesn't support it.

CivilWolf wrote:

hi_voltg3 wrote:

CivilWolf wrote:*snip*

What's the black magic being done here? I tried as many hex values as I knew but could not figure out how to edit this game for the life of me. Not sure why errors were happening for others, it worked on my end.

I think I found the reason it probably works for the both of us. Did you happen to have already applied the other fix, before using mine?

I re-installed the game and I am crashing now.

The fix seems to be:
1. Apply StalkerUKCG's fixed .exe to your game folder.
2. Download the patcher:

Nioh Aspect Ratio Patcher.zip

3.Apply the patch.
4. Enjoy the game!

Im using a monitor with a native resolution of 2560x1080.

Getting the the best result when i set the Nioh launcher resolution to 3840x2160 and at the resolution in the "Nioh Aspect Ratio Patcher" to 2560x1080. Using StalkerUKCG's fixed .exe.

Thank you guys, you are awesome!

Holding out hope for a HUD fix as I'm hoping to play on triple wide. The HUD is essential for this fast-paced game. Can't look at the KI meter way off on the side monitor. Awesome start getting this far in less than 24 hours. Here's hoping for more (I know, greedy).

I'm ready to donate generously for HUD fix, and donate more for cutscenes/FMVs not stretched.

BTW, gonna need some SLI bits for triple wide I imagine. Please post if you come across any.

+1 ultrawide

I registered with this forum because of this game and thread. Thank you for your work But since todays patch ( 1.21.1) the game does no longer work with aspect ratio patcher (I now get application error again). Its because they replaced StalkerUKCGs .exe with it. Does anyone know if I can still use StalkerUKCGs fixed .exe to play the game and still have all the fixes from todays patch (some of them are important to me) ? Or do I have to wait for a fix here? Ty

SirPommes wrote:I registered with this forum because of this game and thread. Thank you for your work But since todays patch ( 1.21.1) the game does no longer work with aspect ratio patcher (I now get application error again). Its because they replaced StalkerUKCGs .exe with it. Does anyone know if I can still use StalkerUKCGs fixed .exe to play the game and still have all the fixes from todays patch (some of them are important to me) ? Or do I have to wait for a fix here? Ty

I'm still using the fixed .exe, patch and overwrite.

SirPommes wrote:I registered with this forum because of this game and thread. Thank you for your work But since todays patch ( 1.21.1) the game does no longer work with aspect ratio patcher (I now get application error again). Its because they replaced StalkerUKCGs .exe with it. Does anyone know if I can still use StalkerUKCGs fixed .exe to play the game and still have all the fixes from todays patch (some of them are important to me) ? Or do I have to wait for a fix here? Ty

-Nioh Aspect Ratio Trainer-
If you would like a way to edit the Aspect Ratio without having to modify the game's files, I just made a trainer that does just that.

It should work with 1.21.01

Steps:
1. Launch the Trainer.
*2. Enter your Aspect Ratio in decimal form(Your settings are saved, so you only have to do this once)
3. Launch the Game.(In Fullscreen mode)
4. Press 'F3' In-Game. (You may have to press it a twice)

-'F1' and 'F2' increment and decrement the aspect ratio by 0.01-

Download: -Not needed anymore-


Jackfuste made an all around better fix here:
http://www.wsgf.org/forums/viewtopic.php?f=64&t=32376&start=70

You should use that instead.

Anyone have any luck getting this to work in Nvidia surround? The closest I have been is with Stalker's exe and Civ's aspect ratio working together. This results in a wider resolution (not sure if it's 21:9 or 48:9) squeezed onto the center monitor with the two side monitors deactivated. Civ's latest fix doesn't result in any detectable change from default launcher settings.

CivilWolf wrote:

SirPommes wrote:I registered with this forum because of this game and thread. Thank you for your work But since todays patch ( 1.21.1) the game does no longer work with aspect ratio patcher (I now get application error again). Its because they replaced StalkerUKCGs .exe with it. Does anyone know if I can still use StalkerUKCGs fixed .exe to play the game and still have all the fixes from todays patch (some of them are important to me) ? Or do I have to wait for a fix here? Ty

-Nioh Aspect Ratio Trainer-
If you would like a way to edit the Aspect Ratio without having to modify the game's files, I just made a trainer that does just that.

It should work with 1.21.01

Steps:
1. Launch the Trainer.
*2. Enter your Aspect Ratio in decimal form(Your settings are saved, so you only have to do this once)
3. Launch the Game.(In Fullscreen mode)
4. Press 'F3' In-Game. (You may have to press it a twice)

-'F1' and 'F2' increment and decrement the aspect ratio by 0.01-

Download:

Nioh_AspectRatio_Trainer.zip

Does not work for me, am i doing something wrong? The only fix that works for me is StalkerUKCGs fixed .exe.

wsgf_fan wrote:Does not work for me, am i doing something wrong? The only fix that works for me is StalkerUKCGs fixed .exe.

I tested it with an unmodified .exe and it seemed to work.
(Deleted the "nioh.exe" then re-validated and acquired a new "nioh.exe" through Steam.)

Are you testing it with StalkerUKCG's .exe or the original .exe?