Prey (2017)

Discussions about getting games to run in a Multi-Mon setup.
Xickle
Posts: 21
Joined: 21 May 2013, 20:02

Re: Prey (2017)

Post by Xickle »

Getting this error in Flawless Widescreen when trying to run Prey:

"Could not find HUDFix1 injection point, Prey may have updated to a version that is no longer supported."

Is the fix outdated or is it a problem on my end?
User avatar
Surreal182
Posts: 2
Joined: 18 May 2016, 14:09

Re: Prey (2017)

Post by Surreal182 »

I am getting the same "Could not find HUDFix1 injection point, Prey may have updated to a version that is no longer supported." error.. I tried removing the HUD injection but then i get the same error for FOV:( seems new injection points need to be made.
dt1000
Posts: 26
Joined: 10 Sep 2010, 03:28

Re: Prey (2017)

Post by dt1000 »

I started getting the same error... right after I got the recent Prey update. Looks like we'll have to wait for HaYDeN to work his magic again!
esteady1
Posts: 112
Joined: 21 Jan 2014, 21:50

Re: Prey (2017)

Post by esteady1 »

The Flawless Widescreen fix still works for me to center the HUD and alter FOV beyond 120 for Nvidia Surround (latest drivers). Latest steam version of Prey.
drsquid
Posts: 4
Joined: 20 Feb 2012, 09:54

Re: Prey (2017)

Post by drsquid »

esteady1 wrote:The Flawless Widescreen fix still works for me to center the HUD and alter FOV beyond 120 for Nvidia Surround (latest drivers). Latest steam version of Prey.


The FOV fix works for me with both 1.03 and 1.04 version of Prey. But the HUD fix does not.

If I select it in FWS when the game starts I get no UI at all and can't event start the game. I am using Eyefinity with the latest Radeon 17.5.2 drivers.

Hopefully, Hayden will update his fix to work with Eyefinity.
drsquid
Posts: 4
Joined: 20 Feb 2012, 09:54

Re: Prey (2017)

Post by drsquid »

Ufolog wrote:Thank you HaYDeN!
Buy I experience a trouble using Flawless Widescreen.
The game menu and all in-game interface have dissapeared once fix is enabled.
Disabling it and switching to desktop and back brings all back again.
Below is some console logs when I'm enabling/disabling the fix
Thanks.

Code: Select all

DisplayDetection -> Scanning process for signs of SoftTH injection
c_HackTool -> Successfully opened process, ID=2120
Suspending Thread
HUDFix1 - Addr=Prey.exe+2A96E8
HUDFix2 - Addr=Prey.exe+2A96FB
HUDFix3 - Addr=Prey.exe+2A9992
FOVPtr - Addr=Prey.exe+240D5B0 (Acquired)
FOVPtr - Addr=Prey.exe+FFFFFFFEFFE1E968 (float=120.00) (Offset=8)
Un-Suspending Thread
Configure Success = true
Inject delay: 1500ms, Configure() took: 275ms, Adjusted Inject delay: 1225ms
Actual delay: 1225ms
Suspending Thread
c_HackTool -> JMP candidate for HUDFix3_cc, NOPS=0, Address=0x1402a9992
c_HackTool -> Successfully allocated 4096 bytes at 0x14a3e0000 for ASM block "Fixes"
c_HackTool -> Assembly compile was successful
Un-Suspending Thread
DisplayDetection -> Resolution change detected
DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series
DisplayDetection -> Eyefinity Display Detected, Res: 1920x1080, AR: 1.78, Position: {X:0, Y:0}
DisplayDetection ->  * Display (1/2): Res: 0x0, Pos: {X:0, Y:0}
DisplayDetection ->  * Display (2/2): Res: 1920x1080, Pos: {X:1920, Y:0}
DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series
DisplayDetection -> No displays associated with this device.
DisplayDetection -> NVIDIA Library not found, skipping NVIDIA detection
DisplayDetection -> Preferred Display \\.\DISPLAY1 connected to AMD Radeon R9 200 Series
DisplayDetection -> Scanning process for signs of SoftTH injection
c_HackTool -> Successfully opened process, ID=2120
Suspending Thread
HUDFix1 - Addr=Prey.exe+2A96E8
HUDFix2 - Addr=Prey.exe+2A96FB
HUDFix3 - Addr=Prey.exe+2A9992
FOVPtr - Addr=Prey.exe+240D5B0 (Acquired)
FOVPtr - Addr=Prey.exe+FFFFFFFEFFE1E968 (float=120.00) (Offset=8)
Un-Suspending Thread
Configure Success = true
Suspending Thread
c_HackTool -> JMP candidate for HUDFix3_cc, NOPS=0, Address=0x1402a9992
c_HackTool -> Successfully allocated 4096 bytes at 0x17fd10000 for ASM block "Fixes"
c_HackTool -> Assembly compile was successful
Un-Suspending Thread
DisplayDetection -> Resolution change detected
DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series
DisplayDetection -> Eyefinity Display Detected, Res: 1920x1080, AR: 1.78, Position: {X:0, Y:0}
DisplayDetection ->  * Display (1/2): Res: 0x0, Pos: {X:0, Y:0}
DisplayDetection ->  * Display (2/2): Res: 1920x1080, Pos: {X:1920, Y:0}
DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series
DisplayDetection -> No displays associated with this device.
DisplayDetection -> NVIDIA Library not found, skipping NVIDIA detection
DisplayDetection -> Preferred Display \\.\DISPLAY1 connected to AMD Radeon R9 200 Series
DisplayDetection -> Resolution change detected
DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series
DisplayDetection -> Eyefinity Display Detected, Res: 1920x1080, AR: 1.78, Position: {X:0, Y:0}
DisplayDetection ->  * Display (1/2): Res: 0x0, Pos: {X:0, Y:0}
DisplayDetection ->  * Display (2/2): Res: 1920x1080, Pos: {X:1920, Y:0}
DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series
DisplayDetection -> No displays associated with this device.
DisplayDetection -> NVIDIA Library not found, skipping NVIDIA detection
DisplayDetection -> Preferred Display \\.\DISPLAY1 connected to AMD Radeon R9 200 Series


Specs: GPU - AMD R9 295X2, 5760x1080, Crimson 17.5.1, Prey Profile for Crossfire enabled, Win 10 64 bit.


I am using Radeon too and have the same issue. So this issue must affect AMD only.
drsquid
Posts: 4
Joined: 20 Feb 2012, 09:54

Re: Prey (2017)

Post by drsquid »

Bump to see if this might get addressed. I really want to play Prey on my Eyefinity setup.
dt1000
Posts: 26
Joined: 10 Sep 2010, 03:28

Re: Prey (2017)

Post by dt1000 »

Hi there!
I just started playing Prey: Mooncrash, and it looks like the update has broken the Flawless Widescreen fix as the reticle is low and the hud is on the far edges.
The message I get on FW is...
Could not find HUDFix1 injection point, Prey may have updated to a version that is no longer supported.
Try restarting Prey or selecting a different version and re-enable the fix.

Any chance of an update for Flawless?
I would be happy to gift the DLC to HaYDeN to help out with a fix - just let me know your steam ID! :D
Cheers,
Dan
Leapo
Posts: 144
Joined: 19 Apr 2008, 22:46

Re: Prey (2017)

Post by Leapo »

Same issue here, will donate to help get this resolved!
User avatar
Haldi
Editors
Editors
Posts: 2286
Joined: 08 May 2011, 18:58

Re: Prey (2017)

Post by Haldi »

Even without the DLC the current version of the Game does not get fixed.

As I'm using 32:9 and not Eyefinity I am not bothered by non centered HUD and therefore simply used Cheat Engine to hack FoV from 120 to 135 which makes it look fine :)
We gonna send it to outa space!
Amon Amarth
I Donated
I Donated
Posts: 513
Joined: 18 Jul 2007, 04:19

Re: Prey (2017)

Post by Amon Amarth »

Tried to use flawlesswidescreen on version 1.07 of the Moonlanding DLC, no go. The plugin needs updating. Hoping someone would be willing to look at it. :rockout:
mgs_ran354
Posts: 7
Joined: 03 Mar 2018, 19:17

Re: Prey (2017)

Post by mgs_ran354 »

Hi

A fix for The Moon Crash DLC would be great !
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests