Kingdoms of Amalur: Reckoning, FoV Fix and Rally for multi screen support

[Pittyh]

Can someone explain how to do this for me ?

It's not working properly for me, the quest menu has some lines missing.

my windows desktop is 6000x1080


in widescreen fixer it's set to

1.01 origin
fov 120
uncorrected resolution 6000x1080

In Game settings
personal.ini
Display Width=4095
Display Height=1020

[Pittyh]

ok it seems if you have a lot of quests the quest journal bugs out.

creaating a new character with no quests and it works fine, but soon as you have a few quests you get this:

Attached files

[Skid]

I am moving this thread to the Request/Discuss Game Solutions sub forum, as it is more appropriate there now, hopefully this will help stop people creating new threads asking about this.

[Xylons]

So when I enter the game, I press my hotkey for WSF and it looked like the screen squeezed in and I couldn't see anything except for the interface!
I'm a newbie, what am I doing wrong! help!

Another newbie here i have the same Problem :-( ... need some help pls ... i'm currently using 1.0.1 Origin Version plugin with Eyefinity

On WidesScreener:
Uncorrected Resolution = 4080 x 1024.
FoV degrees = 80

In Game - Pc Resolution:

4080 x 1024

This is what i got:

[helifax]

[quote]So when I enter the game, I press my hotkey for WSF and it looked like the screen squeezed in and I couldn't see anything except for the interface!
I'm a newbie, what am I doing wrong! help!

Another newbie here i have the same Problem :-( ... need some help pls ... i'm currently using 1.0.1 Origin Version plugin with Eyefinity

On WidesScreener:
Uncorrected Resolution = 4080 x 1024.
FoV degrees = 80

In Game - Pc Resolution:

4080 x 1024

This is what i got:



Try to increase the fov to 130 and see what it does then:)

[inmyrem]

This is exactly what initially happened to me when I tried to use it. After reading through all the replies on this thread, I realized I hadn't updated my game yet. My exe file had the wrong revision. Once I updated, it worked beautifully. Although, as Helifax noted, increasing the FoV for that resolution should help some too.

[quote][quote]So when I enter the game, I press my hotkey for WSF and it looked like the screen squeezed in and I couldn't see anything except for the interface!
I'm a newbie, what am I doing wrong! help!

Another newbie here i have the same Problem :-( ... need some help pls ... i'm currently using 1.0.1 Origin Version plugin with Eyefinity

On WidesScreener:
Uncorrected Resolution = 4080 x 1024.
FoV degrees = 80

In Game - Pc Resolution:

4080 x 1024

This is what i got:



Try to increase the fov to 130 and see what it does then:)

[Xylons]

This is exactly what initially happened to me when I tried to use it. After reading through all the replies on this thread, I realized I hadn't updated my game yet. My exe file had the wrong revision. Once I updated, it worked beautifully. Although, as Helifax noted, increasing the FoV for that resolution should help some too.

[quote][quote][quote]So when I enter the game, I press my hotkey for WSF and it looked like the screen squeezed in and I couldn't see anything except for the interface!
I'm a newbie, what am I doing wrong! help!

Another newbie here i have the same Problem :-( ... need some help pls ... i'm currently using 1.0.1 Origin Version plugin with Eyefinity

On WidesScreener:
Uncorrected Resolution = 4080 x 1024.
FoV degrees = 80

In Game - Pc Resolution:

4080 x 1024

This is what i got:



Try to increase the fov to 130 and see what it does then:)

Thank You guys for your help, i reinstall my game then i run the fixer with the 130 FoV , everything works like a charm... :D once again thanks : )

[liquidsoap89]

Quick question. I've got the steam fix, and in the WSF I set my uncorrected resolution to 3950X720, with a FOV of 120 degrees.

Am I supposed to leave the uncorrected resolution at my desktop resolution, and change the actual games resolution in the .ini? Because right now everything works except for the quest log, which I was under the impression would work at the resolution I'm using. Thanks in advance.

[helifax]

... and change the actual games resolution in the .ini? .

Yes. The limitation comes from the game engine:)

[LoboFH]

Whatever parameters I put on the program, the tool just applies a very broad FoV (100 or more). Even if I put very low number as FOV: 5, 15, 30, whatever, it still applies a huge value. I would like a less agressive wide angle.

Single monitor here, 16:9, 1920x1080, Origin 1.01

[liquidsoap89]

Hmmm... I think I'm missing something here. I turned the uncorrected resolution back to 5760X1080 in the WSF, and I found a "personal" configuration settings file in the Reckoning folder in My Games. I changed the resolution to 3950 (display width) and 720 (display height). I also turned the display fullscreen to = 1 (I was originally playing in a 1920X1080 window). When I went in to the game the quest log still wasn't working. It showed a few of the titles for the quests, and I seem to be able to mouse over them, but there was no information other than that (the famed red line was still present). I went in to the resolution settings in-game just to take a peek and it said it was at 2400X600 (although I'm guessing it might just not tell me the proper resolution since I changed it outside the game). When I first launch the game the steam buttons that pop up on the bottom right DO look lower res, so something is working, I just don't know if it's a good type of working or not.

Is that the right file to modify? Or is there a different one (maybe in my steam folder) hidden away somewhere that I need to change instead?

[Pittyh]

Quick question. I've got the steam fix, and in the WSF I set my uncorrected resolution to 3950X720, with a FOV of 120 degrees.

Am I supposed to leave the uncorrected resolution at my desktop resolution, and change the actual games resolution in the .ini? Because right now everything works except for the quest log, which I was under the impression would work at the resolution I'm using. Thanks in advance.

I think the quest log is still broken

[Akrux]

Guys, I have a little problem. Every time I apply the fix the game crashes to desktop. Any ideas what I can do to repair? I am using the origin version I haven't changed any of the default fix settings. Any advice would be greatly appreciated. Thanks!

[demonlamma]

I just found out about this fix today and it turns out that widescreen fix was updated recently and work work with any of the current amalur plugins, does anyone have the old version that works with the plugins? i can't stand the current fov anymore.

[negative13]

I just found out about this fix today and it turns out that widescreen fix was updated recently and work work with any of the current amalur plugins, does anyone have the old version that works with the plugins? i can't stand the current fov anymore.

Same problem here. Tried using the version in /old but they use a different plugin system.

[Toothless Spoon]

Hopefully our good friend Helifax will get onto this.

[helifax]

Hopefully our good friend Helifax will get onto this.

Hi!
I will try to update the plugin to be used with the latest version of Widescreen Fixer later today! I hope I will manage it;))

[Tnmz]

Guys, I have a little problem. Every time I apply the fix the game crashes to desktop. Any ideas what I can do to repair? I am using the origin version I haven't changed any of the default fix settings. Any advice would be greatly appreciated. Thanks!

i had this problem too but with steam, then im dowloaded skidrow 1.0.0.2 exe, and it works now

[landrass]

Thank Tnmz for info!!!It work for me to!!

Thanks helifax for the fix!!

[dopefish]

When helifax gets online I'm going to work with him to bring the plugin up-to-date.