Widescreen Gaming Forum

Posted: **01 Dec 2017, 01:11**

kamikaze7100 wrote:Thank you so much for the patch!! The 32:9 aspect ratio is working fine but the FOV is of by a bit. If you look at the picture, I think it should be zoomed out by about 30%.

nekoarashi wrote:Definitely for the 32:9 needs to be zoomed out a little if at all possible

Hey guys, I'm uploading some variations of the 32:9 patch, with a FOV of 90, 100 and 110. Check if any of these is fine or if u guys want some specific value! :cheers:

(Kamikaze7100, what a beautiful setup u have there, pretty dope, man! :rockout:

)

artik wrote:Thanks Bullfrog! The 3440 patch works

But the process is long (Lauch Tekken, minimise it, lauch your patch, do 4 clicks...)
Still waiting for the P8M3 fix of his patch. With his patch, you double clic the .exe, and all was automatic (you should try it to see, was really great. Maybe you can adapt yours?).

Hi Artik, good to hear that it's working! And yes, I agree that it's kind of time consuming, but the problem is - my knowledge with Lua is pretty poor, but if I find some time, I will definitely try to make it more automatic.

But hey, u don't need to alt+tab: When u see the Splash Screen, you can already patch the game and close the .exe, before it goes Fullscreen,

mmm0418 wrote:Sorry for the delay, Thank you Savior

Glad to know that it worked for u, mate! :cheers:

Posted: **01 Dec 2017, 01:49**

Bullfrog wrote:But hey, u don't need to alt+tab: When u see the Splash Screen, you can already patch the game and close the .exe, before it goes Fullscreen,

Damn, with a SSD, the splash screen is not long enough to apply your patch. But at least we have a working solution waiting for an improvement. Thanks Bullfrog :thumbup:

Posted: **02 Dec 2017, 04:00**

Thanks Bullfrog!! Everything works like a charm!!

Posted: **04 Jan 2018, 19:17**

Hey Guys, hope u are all doing fine and also thanks for all the generous feedback!

I'm attaching here a patch for the (3840x1600) resolution , requested by @reyshan

Have a good one!

Posted: **07 Jan 2018, 06:22**

Bullfrog wrote:Hey Guys, hope u are all doing fine and also thanks for all the generous feedback!

I'm attaching here a patch for the (3840x1600) resolution , requested by @reyshan

Have a good one!

Thank You very much mate

Posted: **07 Jan 2018, 06:27**

Thank You Bullfrog!! It works great!

Posted: **08 Jan 2018, 20:55**

Nice! I'm glad it worked, mate!!

:cheers:

Posted: **13 Jan 2018, 19:58**

@Bullfrog, could you please share the addresses and values for FOV and Black bars fixes? Thanks

Posted: **15 Jan 2018, 22:29**

Hi @_AG !

Tbh, I got the addresses and values from the @jackfuste and @Ark post:

(First Jackfuste posted this:)

Spoiler:

And latter, Ark posted a very clear, step-by-step instructions here:

Spoiler:

So, to sum it up:

For Black Bars:
3B 8E E3 3F to value found here: http://www.wsgf.org/article/common-hex-values

And for FoV:
00 00 82 42 00 80 54 45 to 30 43 A2 42 00 80 54 45 (this value works pretty nice for 21:9 resolutions, but if u want another angle, u got convert the angle number to hex, using any online IEEE 754 calculator, then write it from the right to left, example: If the calculator gives u "13 24 35 46", write down "46 35 24 13", and change the first 4 chunks from the original value, so "00 00 82 42 00 80 54 45" would become "46 35 24 13 00 80 54 45"

(This last part is well explained at the button of this same page: http://www.wsgf.org/article/common-hex-values , where it reads:

Spoiler:

Posted: **07 Jun 2018, 14:57**

Hello Bullfrog, great work on the patches, your latest ones work great and are the only ones I could get to work. However, my resolution is 5760x1200 and your latest patches do not include this, so there are black bars towards the sides. If you're still active would you be able to make another for this resolution please?

Posted: **13 Jun 2018, 00:03**

Hey DoctorAnubis, glad to hear that the others patches worked for u! ^^

About one for 5760x1200, what is exactly your setup? 3 monitors of 16:10 ?

If so, at least removing the black bars should work fine.

However, I'm not 100% sure about the FOV, I did some calculations, I believe 120º should work, but again, not sure.

Test it and let me know how it goes!

Posted: **13 Jun 2018, 20:18**

Thank you, yes, I have 3 monitors at 1920x1200 - 16:10.

I won't be able to test this until tomorrow but I will be sure to let you know as soon as I do

Posted: **23 Jun 2018, 18:02**

DoctorAnubis wrote:I won't be able to test this until tomorrow but I will be sure to let you know as soon as I do

Hey DoctorAnubis, have u tested it? I'm curious to know if it worked, ^^

Posted: **30 Jun 2018, 04:08**

Bullfrog wrote:
DoctorAnubis wrote:I won't be able to test this until tomorrow but I will be sure to let you know as soon as I do

Hey DoctorAnubis, have u tested it? I'm curious to know if it worked, ^^

Hey Bullfrog, sorry for the length of time it has taken for me to get back to you. Yes, it worked wonderfully thank you. The only flaw I have noticed is the FOV whenever the camera zooms in, it zooms in waaaaay too far, but I imagine there is no way to fix this?

: 20180629212507_1.jpg (1.48 MiB) Viewed 14612 times

: 20180629212421_1.jpg (917.48 KiB) Viewed 14639 times

: 20180629212458_1.jpg (1.08 MiB) Viewed 14607 times

Posted: **09 Jul 2018, 17:32**

DoctorAnubis wrote:Yes, it worked wonderfully thank you.

Nice, glad to hear it! :rockout:

DoctorAnubis wrote:
20180629212507_1.jpg

Man, Tekken looks so epic in this resolution!
:triplewide:

FTW, haha

DoctorAnubis wrote:The only flaw I have noticed is the FOV whenever the camera zooms in, it zooms in waaaaay too far, but I imagine there is no way to fix this?

Hmm, interesting, I though about it, there should be a flag in the code to trigger the "zoom in" at the end of a match. I don't have enough skill to do this, specially coding in Lua (for CE), but there should be a way to monitor this flag, and when it triggers, change the FOV to the original value, and then, change it back to the gameplay value...But, to be honest, I don't think it's a good idea, chances are high for the game to crash when changing FOV mid-game, so I don't think it's worth.

Posted: **21 Jul 2018, 14:58**

Bullfrog wrote:Hey Guys, hope u are all doing fine and also thanks for all the generous feedback!

I'm attaching here a patch for the (3840x1600) resolution , requested by @reyshan

Have a good one!

Thanks for your patch.
Sadly i get small black bars when using your patch.
Would it be possible to change the hex codes in game's exe file, so i dont have to apply the patch manually every time? If so which values should i change?

Posted: **22 Jul 2018, 16:07**

Here's trainer for any aspect ratio (tested on V1.14):

Tekken7_Fix_1_14.7z: (2.67 MiB) Downloaded 2845 times

Run trainer
Run game and press "F1" in main menu

if it didn't work, then try:

Run game and Alt+tab it
Run trainer and press "F1"
Alt+tab to the game

Here's patcher:

TEKKEN7_1_14_BB_FOV_FIX.7z: (13.79 KiB) Downloaded 1901 times

Patcher probably won't be work with steam version.

Copy TEKKEN7_1_14_BB_FOV_FIX.exe in the game folder TekkenGame\Binaries\Win64
Remove read-only attribute from TekkenGame-Win64-Shipping.exe
Run TEKKEN7_1_14_BB_FOV_FIX.exe and apply patch to TekkenGame-Win64-Shipping.exe

Posted: **23 Jul 2018, 20:57**

This seems to be working well, thanks

Posted: **07 Sep 2018, 05:38**

The latest update has broken the patcher, sadly.

Posted: **07 Oct 2018, 00:47**

Is there any chance we could get this fixed for the Season 2 update @jackfuste?

I'm not sure if pinging works for this forum. Discord has RUINED me lol!

Widescreen Gaming Forum

Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7

Re: Tekken 7