Mviewtech release MP102-DVI with edge blending

Matrox TH2Go, MView, Projectors, SofTH, etc.
Post Reply
User avatar
mviewtech
Posts: 119
Joined: 11 Aug 2009, 09:27
Location: shanghai
Contact:

Mviewtech release MP102-DVI with edge blending

Post by mviewtech »

We release product of MP102-DVI with the edge-blending . Edge blending is a pure hardware design, without any delay. Users can play 1080P videos, play 3D games, does not affect any performance of graphics cards. We provide 0-511 overlap setting, user can adjust the gamma, p and alpha parameters. Using our products can link to two projectors resolution from 1024x768 60HZ to 2048x1200 60HZ, also supported part of the 3D projection, such as a resolution of 1024x768 120HZ, or 1280x800 120HZ.Part of the resolution need to customize.

input interface : one dual link DVI interface .maximum pixel clock 330Mhz
output interface: two DVI-I(can DVI and VGA simultaneously),maximum pixel clock 165Mhz
accessories:one 1.5m Duallink DVI cable,one 5V/2A power supply(100-240V) AC ,one RS-232 cable
dimension:165mmx130mmx28mm
warranty:2 year limited warranty
Best Regards!
Mviewtech
Shanghai Mviewtech Co.,Ltd.
User avatar
mviewtech
Posts: 119
Joined: 11 Aug 2009, 09:27
Location: shanghai
Contact:

Re: Mviewtech release MP102-DVI with edge blending

Post by mviewtech »

Hello all,
the support resolution
Project resolution refresh(HZ) Overlap width
800x600 60/75 0-512

1024x768 60/75/120 0-512
1280x1024 60/75 0-512
1280x720 50/60 0-512
1280x800 60/75/120 0-512
1366x768 60 0-512
1400x1050 60/75 0-512
1600x1200 60 0-512
1920x1080 50/60 0-512
1920x1200 60 0-512
2048x1080 50/60 0-512
2048x1200 50/60 0-512

Best Regards!
Mviewtech
Shanghai Mviewtech Co.,Ltd.
User avatar
mviewtech
Posts: 119
Joined: 11 Aug 2009, 09:27
Location: shanghai
Contact:

Re: Mviewtech release MP102-DVI with edge blending

Post by mviewtech »

Hello all,
I place a video at http://v.ku6.com/show/yqByX01YbWFWKcLD.html
1. two Optoma 1080p projector
2. edge blending width 360 pixels
3.computer output resolution 3480x1080P


Best Regards!
Mviewtech
Shanghai Mviewtech Co.,Ltd.
User avatar
mviewtech
Posts: 119
Joined: 11 Aug 2009, 09:27
Location: shanghai
Contact:

Re: Mviewtech release MP102-DVI with edge blending

Post by mviewtech »

Hello All,
user can buy at Dhgate

http://www.dhgate.com/p_ff808081289b2c6f01289f4361144158.html#0













if you need datasheet,please contact me

Best Regards!
Mviewtech
Shanghai Mviewtech Co.,Ltd.
l88bastard
Posts: 98
Joined: 06 Oct 2009, 22:47

Re: Mviewtech release MP102-DVI with edge blending

Post by l88bastard »

Great looking product, its just waaaay to expensive!
User avatar
mviewtech
Posts: 119
Joined: 11 Aug 2009, 09:27
Location: shanghai
Contact:

Re: Mviewtech release MP102-DVI with edge blending

Post by mviewtech »

Hello All,
we set up edge blending system with two projectors(Benq 670). I place some picture for testing by our company.
the overlap is 256 pixel.



pure black with black level compensation










Best Regards!
Mviewtech
Shanghai Mviewtech Co.,Ltd.
User avatar
mviewtech
Posts: 119
Joined: 11 Aug 2009, 09:27
Location: shanghai
Contact:

Re: Mviewtech release MP102-DVI with edge blending

Post by mviewtech »

I post some video at http://v.ku6.com/show/wSmElYAISRMsnsJZ.html
user can download datasheet for our device (MP102/MP103) hardware edge blending unit at http://www.mviewtech.com/en/faq.asp?video2

Best Regards!
Mviewtech
Shanghai Mviewtech Co.,Ltd.
Snipe3000
Posts: 25
Joined: 25 Sep 2007, 02:33

Re: Mviewtech release MP102-DVI with edge blending

Post by Snipe3000 »

Nice stuff, just way too expensive.
screenglued
Posts: 9
Joined: 05 Jul 2011, 20:22

Re: Mviewtech release MP102-DVI with edge blending

Post by screenglued »

If you can come on here and give a little bit of justification on the price I might be willing to look in to this. Why so expensive?
User avatar
BHawthorne
Insiders
Insiders
Posts: 1640
Joined: 06 May 2006, 12:46

Re: Mviewtech release MP102-DVI with edge blending

Post by BHawthorne »

Fully integrated hardware edge blending options on the market are never inexpensive. If you don't need hardware edge blending there are options out there to use their MV103 box and software edge blending and pre-warping at lesser cost. I'll be experimenting with their MV103 box in a few weeks time with a third party software pre-warping utility. The main difference is, hardware vs software implementation of pre-warp and edge blend technology.

Everything being equal, I'd prefer hardware edge blending because it does not require software running on a computer to enable it once it's calibrated.
Brad Hawthorne
Product Manager
Nthusim Pty. Ltd. | www.nthusim.com
Aveex
Posts: 1
Joined: 02 Aug 2011, 01:15

Can I connect another DVI Output Devices to MP102-DVI?

Post by Aveex »

Hello I would like to know if the MP102-DVI with the edge-blending works with another DVI output devices like xbox , PS3, Blu-ray players (obviously all this with DVI Adapter) for example? or just works with Computer Signal?,
Hello Kids!
User avatar
suiken_2mieu
Insiders
Insiders
Posts: 2351
Joined: 20 Aug 2009, 04:20
Location: Virginia
Contact:

Aveex wrote:Hello I would

Post by suiken_2mieu »

Hello I would like to know if the MP102-DVI with the edge-blending works with another DVI output devices like xbox , PS3, Blu-ray players (obviously all this with DVI Adapter) for example? or just works with Computer Signal?,

Well if it's anything like the TH2Go. It will only display one image on one projector. The Xbox 360 and PS3 only out single monitor resolutions.
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests