Street Fighter V 3440 x 1440 21:9?

[mistershan]

Is it possible to get SF V working with an ultra wide? I saw today a simple fix for Tekken 7 was put out to remove the black bars. Is that possible for SF V?

[mistershan]

bump please

[jackfuste]

1. Install Cheat Engine
2. Run StreetFighterV.CT table
3. Choose "Yes" when you see "This table contain a lua script. Do you want to run it?"
4. Run Street Fighter V and Alt+Tab it
5. In CE press "File - Open Process"
6. Select topmost StreetFighterV.exe in list and press "Open"
7. Choose "Yes" when you see "Keep the current address list/code list?"
8. Alt+Tab to Street Fighter V
9. Press "F1" for 21:9, or press "F2" for 48:9

StreetFighterV.zip

StreetFighterV.CT table

(606 Bytes) Downloaded 2636 times

SFV.gif (180.29 KiB) Viewed 33665 times

SF_V.jpg (837.09 KiB) Viewed 33656 times

[mistershan]

1. Install Cheat Engine
2. Run StreetFighterV.CT table
3. Choose "Yes" when you see "This table contain a lua script. Do you want to run it?"
4. Run Street Fighter V and Alt+Tab it
5. In CE press "File - Open Process"
6. Select topmost StreetFighterV.exe in list and press "Open"
7. Choose "Yes" when you see "Keep the current address list/code list?"
8. Alt+Tab to Street Fighter V
9. Press "F1" for 21:9, or press "F2" for 48:9

StreetFighterV.zip

SFV.gif

SF_V.jpg

Thanks, but this doesn't seem to work for me. I followed your tutorial but when I press F1 nothing happens. I also see an FOV option as well. Is this cheat table supposed to also do a FOV fix? Perhaps this only works with an older version of the game?

The only problem I ran into with your tutorial is when I load the cheat table I don't get this prompt " "This table contain a lua script. Do you want to run it?" The table just loads but says nothing. Idk if this is helpful for trouble shooting.

[jackfuste]

Thanks, but this doesn't seem to work for me. I followed your tutorial but when I press F1 nothing happens.

What values did you have in table at step №7 ?
Black_Bars should be "01" and FOV should be "0.002777777845"

The only problem I ran into with your tutorial is when I load the cheat table I don't get this prompt " "This table contain a lua script. Do you want to run it?" The table just loads but says nothing. Idk if this is helpful for trouble shooting.

Check settings in CE:
Edit - Settings - General Settings - Ask to run lua script from table

I also see an FOV option as well. Is this cheat table supposed to also do a FOV fix?

You can manipulate FOV using this table.

Perhaps this only works with an older version of the game?

I test it on Ver.02.021

[mistershan]

Thanks, but this doesn't seem to work for me. I followed your tutorial but when I press F1 nothing happens.

What values did you have in table at step №7 ?
Black_Bars should be "01" and FOV should be "0.002777777845"

The only problem I ran into with your tutorial is when I load the cheat table I don't get this prompt " "This table contain a lua script. Do you want to run it?" The table just loads but says nothing. Idk if this is helpful for trouble shooting.

Check settings in CE:
Edit - Settings - General Settings - Ask to run lua script from table

I also see an FOV option as well. Is this cheat table supposed to also do a FOV fix?

You can manipulate FOV using this table.

Perhaps this only works with an older version of the game?

I test it on Ver.02.021

I did go into settings and ask to run lua script was not checked off. I did, but it still doesn't work.

When you say values in the table, do you mean at the bottom where it says Active, Description, Address, Type, Value? For black bars the value down there is 00. For FOV the value is .003467142349. So if that's what you mean, then it's not right. I also try to change the values but whenever I tab back into the game it changes them back to "00", and ".00346...." Any ideas what I could be doing wrong now? Thanks.

[jackfuste]

I did go into settings and ask to run lua script was not checked off. I did, but it still doesn't work.

When you say values in the table, do you mean at the bottom where it says Active, Description, Address, Type, Value? For black bars the value down there is 00. For FOV the value is .003467142349. So if that's what you mean, then it's not right. I also try to change the values but whenever I tab back into the game it changes them back to "00", and ".00346...." Any ideas what I could be doing wrong now? Thanks.

1. Run SFV.CT table
2. Table - Show Cheat Table Lua Script - Execute Script
3. Start game, but don't close CE window

[rogermorse]

This looks interesting. I know that the Tekken fix works (I play it) but how will it work with Street Fighter? Street fighter has a fixed camera, that means if you get far from your opponent, you can't go further than the actual 'screen edge'. Being 21:9 wider than 16:9, is there an invisible wall that stops you from going to the edge of the visible stage (on the 21:9 screen) ?

So basically on the 21:9 screen you can't walk past the invisible walls placed on the lines of the 'virtual' 16:9 screen?

[mistershan]

I did go into settings and ask to run lua script was not checked off. I did, but it still doesn't work.

When you say values in the table, do you mean at the bottom where it says Active, Description, Address, Type, Value? For black bars the value down there is 00. For FOV the value is .003467142349. So if that's what you mean, then it's not right. I also try to change the values but whenever I tab back into the game it changes them back to "00", and ".00346...." Any ideas what I could be doing wrong now? Thanks.

1. Run SFV.CT table
2. Table - Show Cheat Table Lua Script - Execute Script
3. Start game, but don't close CE window

Thanks man! It's almost perfect Once the game loads up it is in 21:9 automatically. I didn't have to press F1 or anything. The problem is it's zoomed in a bit too much. I like how the characters are bigger and easier to see but their feet are cut off. Is there any way to fix that? Thanks again for your help.

[jackfuste]

So basically on the 21:9 screen you can't walk past the invisible walls placed on the lines of the 'virtual' 16:9 screen?

You can't pass invisible line that limited to 16:9.

Thanks man! It's almost perfect Once the game loads up it is in 21:9 automatically. I didn't have to press F1 or anything. The problem is it's zoomed in a bit too much. I like how the characters are bigger and easier to see but their feet are cut off. Is there any way to fix that? Thanks again for your help.

Try this table:

SFV_1.zip

(1.15 KiB) Downloaded 3604 times

[mistershan]

So basically on the 21:9 screen you can't walk past the invisible walls placed on the lines of the 'virtual' 16:9 screen?

You can't pass invisible line that limited to 16:9.

Thanks man! It's almost perfect Once the game loads up it is in 21:9 automatically. I didn't have to press F1 or anything. The problem is it's zoomed in a bit too much. I like how the characters are bigger and easier to see but their feet are cut off. Is there any way to fix that? Thanks again for your help.

Try this table:

SFV_1.zip

Sorry I was just able to try it out and yes it works perfectly! Thanks so much. I hope though this won't get flagged as cheating and I could be banned no?

[Nuwidol]

Been trying to set this up for a while but I keep getting this error. Is that because of the newest patch?

Anyone else getting it?

[Guest]

jackfuste
can you help me ?

[Guest]

I did go into settings and ask to run lua script was not checked off. I did, but it still doesn't work.

When you say values in the table, do you mean at the bottom where it says Active, Description, Address, Type, Value? For black bars the value down there is 00. For FOV the value is .003467142349. So if that's what you mean, then it's not right. I also try to change the values but whenever I tab back into the game it changes them back to "00", and ".00346...." Any ideas what I could be doing wrong now? Thanks.

1. Run SFV.CT table
2. Table - Show Cheat Table Lua Script - Execute Script
3. Start game, but don't close CE window

This script worked. But the characters got too big, appearing from the waist up. Can you help me? 5760x1080, aspect ratio 16: 3

[Guest]

Thanks, but this doesn't seem to work for me. I followed your tutorial but when I press F1 nothing happens.

What values did you have in table at step №7 ?
Black_Bars should be "01" and FOV should be "0.002777777845"

The only problem I ran into with your tutorial is when I load the cheat table I don't get this prompt " "This table contain a lua script. Do you want to run it?" The table just loads but says nothing. Idk if this is helpful for trouble shooting.

Check settings in CE:
Edit - Settings - General Settings - Ask to run lua script from table

I also see an FOV option as well. Is this cheat table supposed to also do a FOV fix?

You can manipulate FOV using this table.

Perhaps this only works with an older version of the game?

I test it on Ver.02.021

jackfuste
can you do the same for a 2.60 version? works perfectly in the old versions, but in the old can not use DLC of the characters and stages.
can you help us?

[Adam-2012]

So basically on the 21:9 screen you can't walk past the invisible walls placed on the lines of the 'virtual' 16:9 screen?

You can't pass invisible line that limited to 16:9.

Thanks man! It's almost perfect Once the game loads up it is in 21:9 automatically. I didn't have to press F1 or anything. The problem is it's zoomed in a bit too much. I like how the characters are bigger and easier to see but their feet are cut off. Is there any way to fix that? Thanks again for your help.

Try this table:

SFV_1.zip

can you do the same for 3840x1080 32:9?

[jackfuste]

can you do the same for 3840x1080 32:9?

Here's trainer for any aspect ratio (tested on Ver.03.040):

SFV_Ultrawide.7z

(2.71 MiB) Downloaded 1781 times

• Run trainer (don't press "Fix" button)
• Run game
• Trainer will be automatically closed after memory patching

CE table:

SFV_Ultrawide_table.zip

(1.32 KiB) Downloaded 1088 times

[Adam-2012]

can you do the same for 3840x1080 32:9?

Here's trainer for any aspect ratio (tested on Ver.03.040):

SFV_Ultrawide.7z

• Run trainer (don't press "Fix" button)
• Run game
• Trainer will be automatically closed after memory patching

CE table:

SFV_Ultrawide_table.zip

it works! thank you!

[ArteSequencia]

1. Install Cheat Engine
2. Run StreetFighterV.CT table
3. Choose "Yes" when you see "This table contain a lua script. Do you want to run it?"
4. Run Street Fighter V and Alt+Tab it
5. In CE press "File - Open Process"
6. Select topmost StreetFighterV.exe in list and press "Open"
7. Choose "Yes" when you see "Keep the current address list/code list?"
8. Alt+Tab to Street Fighter V
9. Press "F1" for 21:9, or press "F2" for 48:9

StreetFighterV.zip

SFV.gif

SF_V.jpg

have you any way to use that without stretching the bars and portraits, leaving them to their original size?
the following image I did in Photoshop, I would like it to look like this:

[GS1981]

Hi is there a updated fix for this game?