Widescreen Gaming Forum

Hello guys!

I'm new here, but i read the forum since i've eyefinity.

Now i've a problem with my displays' vsync.
Two or more month ago my center display had 1 'tear point'. I reconnected my monitors, and made the eyefinity again. But after that, i had 1-1 'tear point' on the side monitors, but no on center.

And i couldn't find answer here and on the internet, so i posted here this.

Can anyone help with this specially vsync bug?
My rig is on my profile, and the display connection is like this:

hdmi------------------------------------------------------------>hdmi in
dp->dp to dvi converter->dvi to hdmi converter->hdmi in (because there is not active dp to hdmi converter, only active dp to dvi)
dvi---------------->dvi to hdmi converter--------------->hdmi in

(Sorry for my bad english, i am learning it now.)

Thanks: hunkris

I think that for the time being unless you connect all three monitors the same way (3x DP) you'll get tearing on the odd monitor out..

_________________
| i7 3770k @ 4.4, 16GB | 2x Sapphire 7970 GHz @ 1150 | Carbide 540 w H100 & HX850W | 3x Dell U2312HM @ 5760x1080 |

Unfortunately there is no 3 dp output on the vga.

yeah I think there's only a few cards that has that many of the same connections. I'm not sure about those MST display hubs, maybe someone with more knowledge will drop a line

_________________
| i7 3770k @ 4.4, 16GB | 2x Sapphire 7970 GHz @ 1150 | Carbide 540 w H100 & HX850W | 3x Dell U2312HM @ 5760x1080 |

Best you can do is setup your screens with 2 of the same connectors and 1 that's not. Then choose one of the same connecting displays as your main display. It will give you only one screen with tearing.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

Soon my vga won't be enough, then i'll buy another one. Can i use 3 same (DVI) output in crossfirex?

Sorry no You have to connect all displays to ONE card, so unless that one card has 3x DVI or DP or something you can't do much about it (yet)

_________________
| i7 3770k @ 4.4, 16GB | 2x Sapphire 7970 GHz @ 1150 | Carbide 540 w H100 & HX850W | 3x Dell U2312HM @ 5760x1080 |

You could get an MST hub and connect all three over DP (using adapters). They seem to only be available in europe though.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

That is very expensive... A hub + 3 active dp to hdmi adapter... (When i bought the eyefinity parts there wasnt active, only active dp->dvi and then dvi->hdmi.)

But i saw a hub (maybe club3d) with non-active dp outputs so there can be used passive dp to hdmi adapter.
Any judgement?

Yes, with a hub, the monitors off the hub can be passive. Just make sure to connect all three off the hub if you're using passive adapters.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |