Tekken 7

[artik]

Patches don't work anymore with the today's update. Blackbars removed, but FOV is not correct. P8M3, you think it's fixable ?

[Bullfrog]

Patches don't work anymore with the today's update. Blackbars removed, but FOV is not correct. P8M3, you think it's fixable ?

Hey Artik, my patch is still working after today's update, at least in me end.


So, I'm posting here my patch for the main 3 ultrawide resolutions, hope it helps.
(If you use one resolution that it's not listed here, feel free to request/PM me)

Cheers!

[kamikaze7100]

Thank you so much for the patch!! The 32:9 aspect ratio is working fine but the FOV is of by a bit. If you look at the picture, I think it should be zoomed out by about 30%.

[mmm0418]

Patches don't work anymore with the today's update. Blackbars removed, but FOV is not correct. P8M3, you think it's fixable ?

Hey Artik, my patch is still working after today's update, at least in me end.


So, I'm posting here my patch for the main 3 ultrawide resolutions, hope it helps.
(If you use one resolution that it's not listed here, feel free to request/PM me)

Cheers!

Sorry for the delay, Thank you Savior

[nekoarashi]

Definitely for the 32:9 needs to be zoomed out a little if at all possible

[artik]

Thanks Bullfrog! The 3440 patch works

But the process is long (Lauch Tekken, minimise it, lauch your patch, do 4 clicks...)
Still waiting for the P8M3 fix of his patch. With his patch, you double clic the .exe, and all was automatic (you should try it to see, was really great. Maybe you can adapt yours?).

[Bullfrog]

Thank you so much for the patch!! The 32:9 aspect ratio is working fine but the FOV is of by a bit. If you look at the picture, I think it should be zoomed out by about 30%.

Definitely for the 32:9 needs to be zoomed out a little if at all possible

Hey guys, I'm uploading some variations of the 32:9 patch, with a FOV of 90, 100 and 110. Check if any of these is fine or if u guys want some specific value!

(Kamikaze7100, what a beautiful setup u have there, pretty dope, man! )

Thanks Bullfrog! The 3440 patch works

But the process is long (Lauch Tekken, minimise it, lauch your patch, do 4 clicks...)
Still waiting for the P8M3 fix of his patch. With his patch, you double clic the .exe, and all was automatic (you should try it to see, was really great. Maybe you can adapt yours?).

Hi Artik, good to hear that it's working! And yes, I agree that it's kind of time consuming, but the problem is - my knowledge with Lua is pretty poor, but if I find some time, I will definitely try to make it more automatic.

But hey, u don't need to alt+tab: When u see the Splash Screen, you can already patch the game and close the .exe, before it goes Fullscreen,

Sorry for the delay, Thank you Savior

Glad to know that it worked for u, mate!

[artik]

But hey, u don't need to alt+tab: When u see the Splash Screen, you can already patch the game and close the .exe, before it goes Fullscreen,

Damn, with a SSD, the splash screen is not long enough to apply your patch. But at least we have a working solution waiting for an improvement. Thanks Bullfrog

[kamikaze7100]

Thanks Bullfrog!! Everything works like a charm!!

[Bullfrog]

Hey Guys, hope u are all doing fine and also thanks for all the generous feedback!

I'm attaching here a patch for the (3840x1600) resolution , requested by @reyshan

Have a good one!

[reyshan]

Hey Guys, hope u are all doing fine and also thanks for all the generous feedback!

I'm attaching here a patch for the (3840x1600) resolution , requested by @reyshan

Have a good one!

Thank You very much mate

[reyshan]

Thank You Bullfrog!! It works great!

[Bullfrog]

Nice! I'm glad it worked, mate!!

[_AG]

@Bullfrog, could you please share the addresses and values for FOV and Black bars fixes? Thanks

[Bullfrog]

Hi @_AG !

Tbh, I got the addresses and values from the @jackfuste and @Ark post:

(First Jackfuste posted this:)

Spoiler:

Can someone please make this trainer fix into an .exe replacement? Please Jack can you help us out?

Here's patches for exe:

patch_21x9.7z

patch_48x9.7z

Copy it to TEKKEN 7\TekkenGame\Binaries\Win64\ and patch "TekkenGame-Win64-Shipping.exe"


How to manually patch exe using HEX-editor:
Black bars removing

• B8 0F 84 D0 01 00 00 F3 => B8 0F 85 D0 01 00 00 F3
  
  or other way
  
• Replace all values 3B 8E E3 3F => Aspect Ratio

FOV
00 00 82 42 00 80 54 45 => New FOV 00 80 54 45


For example, for 3440x1440:
B8 0F 84 D0 01 00 00 F3 => B8 0F 85 D0 01 00 00 F3
00 00 82 42 00 80 54 45 => 30 43 A2 42 00 80 54 45

And latter, Ark posted a very clear, step-by-step instructions here:

Spoiler:

1. Download and install Cheat Engine 6.7 or higher (http://www.cheatengine.org/)
2. Launch Tekken 7, then back to desktop with alt-tab
3. Launch Cheat Engine and at the top left computer's icon, select TEKKEN7 in the list
4. In the right panel of cheat engine, in "Value Type" select "Array of byte"
5. in the array of byte box upper, search: 3B 8E E3 3F
6. Select all results (Ctrl+A), and hit Ctrl+E (Change value of seleted addresses)
7. In the box, paste your desired aspect ratio (http://www.wsgf.org/article/common-hex-values) in my case 21:9 (3440x1440) so: 8E E3 18 40
8. then correct the FOV. Search for 00 00 82 42 00 80 54 45 and replace with 30 43 A2 42 00 80 54 45

Back to tekken it's in 21:9 3440x1440, but I don't have any skill to create a patch.exe

So, to sum it up:

For Black Bars:
3B 8E E3 3F to value found here: http://www.wsgf.org/article/common-hex-values

And for FoV:
00 00 82 42 00 80 54 45 to 30 43 A2 42 00 80 54 45 (this value works pretty nice for 21:9 resolutions, but if u want another angle, u got convert the angle number to hex, using any online IEEE 754 calculator, then write it from the right to left, example: If the calculator gives u "13 24 35 46", write down "46 35 24 13", and change the first 4 chunks from the original value, so "00 00 82 42 00 80 54 45" would become "46 35 24 13 00 80 54 45"

(This last part is well explained at the button of this same page: http://www.wsgf.org/article/common-hex-values , where it reads:

Spoiler:

"Sometimes the field of view (fov) for a game can be found in hexadecimal form in one of the game's files. The format you will most likely see is the IEEE 754 standard which is comprised of four hexadecimal pairs.

For example a fov of 60.0 would be the following in hexadecimal.

42 70 00 00

This will almost always be formatted to be read from right to left in the game's files. So 42 70 00 00 becomes the following in the file.

00 00 70 42

You can use a IEEE 754 calculator like this one to get your fov value into hexadecimal format. Simply paste your fov in the decimal field and click the Rounded or Not Rounded button (should not matter) and look at the hexadecimal result under the single precision fields.

Think of the hexadecimal value in this format.

ST UV WX YZ

You will be using it in this format.

YZ WX UV ST

Remember you can calculate the field of view by using the FOV Calc tool on this site along with any of several other methods for calculating the field of view."

[DoctorAnubis]

Hello Bullfrog, great work on the patches, your latest ones work great and are the only ones I could get to work. However, my resolution is 5760x1200 and your latest patches do not include this, so there are black bars towards the sides. If you're still active would you be able to make another for this resolution please?

[Bullfrog]

Hey DoctorAnubis, glad to hear that the others patches worked for u! ^^

About one for 5760x1200, what is exactly your setup? 3 monitors of 16:10 ?

If so, at least removing the black bars should work fine.

However, I'm not 100% sure about the FOV, I did some calculations, I believe 120º should work, but again, not sure.

Test it and let me know how it goes!

[DoctorAnubis]

Thank you, yes, I have 3 monitors at 1920x1200 - 16:10.

I won't be able to test this until tomorrow but I will be sure to let you know as soon as I do

[Bullfrog]

I won't be able to test this until tomorrow but I will be sure to let you know as soon as I do

Hey DoctorAnubis, have u tested it? I'm curious to know if it worked, ^^

[DoctorAnubis]

I won't be able to test this until tomorrow but I will be sure to let you know as soon as I do

Hey DoctorAnubis, have u tested it? I'm curious to know if it worked, ^^

Hey Bullfrog, sorry for the length of time it has taken for me to get back to you. Yes, it worked wonderfully thank you. The only flaw I have noticed is the FOV whenever the camera zooms in, it zooms in waaaaay too far, but I imagine there is no way to fix this?

20180629212507_1.jpg (1.48 MiB) Viewed 14608 times

20180629212421_1.jpg (917.48 KiB) Viewed 14635 times

20180629212458_1.jpg (1.08 MiB) Viewed 14603 times