Widescreen Gaming Forum

Thank You!!! Works great

In the version from CODEX it does not work. Crash on launch

Yeah, if you don't know how to Hex Edit and just read the top part it can be quite confusing. But that's why I explained it extra under the pictures.
I also edited my post.



This Fix is only for the Steam Version.

1280x1024?

00 00 A0 3F

What will be ideas for start in Codex? Can you make a patcher?

Woking thank you!

OnkelJupp
thx. but, It does not work, I replaced it with an editor, it will work in a window without a frame, but not full screen, when you do full screen, the bands remain(((

Pls give me Hex number for 3840:1080 32:9. I know how to replace it by using Hex. Thanks alot

_________________
Samsung CHG90 49inch 32:9 144hz, 1ms, VA panel Qled Monitor

Yes, need fix to 3840x1080 resolution. Maybe u can explain how calculate it?

_________________
Samsung LC49J890DKI 49inch 32:9 144hz, 5ms, VA panel Qled Monitor
A Plague Tale Innocence 39 8E E3 3F to 39 8E 63 40
Dark Souls III 800700003804 to 000F00003804

I found the Hex fix for 3840:1080, It isnt perfect but playable. Look for APlagueTaleInnocence_x64.exe in game folder and search 39 8E E3 3F Hex Values, then change all to 39 8E 63 40

_________________
Samsung CHG90 49inch 32:9 144hz, 1ms, VA panel Qled Monitor

You do something wrong.
39 8E E3 3F>26 B4 17 40 - works for me on codex version.

You can find the most common ones here: http://www.wsgf.org/article/common-hex-values !
Sorry, I only play in Borderless Window Mode; after some Steam Community Hub Feedback I thought it would work fine with Fullscreen.

Work's fine - thank you very match

_________________
Samsung LC49J890DKI 49inch 32:9 144hz, 5ms, VA panel Qled Monitor
A Plague Tale Innocence 39 8E E3 3F to 39 8E 63 40
Dark Souls III 800700003804 to 000F00003804

Onkeljupp!
thanks a lot!

I don´t know what people are talking about. 3440x1440 Hex you gave works great on Fullscreen and also on CODEX which is what I´m using.
So thank you very much, game looks so freaking better in UltraWide!

Also search shows nothing in Codex version. If your one works with 3440x1440, could you just post the exe?

Make sure you change the datatype to hex-values (default is text-string) otherwise the search will fail.

Hello, for a resolution 3840 x 1080 ratio 32:9, I don't succeed to find the way to enjoy in fullscreen. Someone can help please? Best regards

Read 2st page

_________________
Samsung LC49J890DKI 49inch 32:9 144hz, 5ms, VA panel Qled Monitor
A Plague Tale Innocence 39 8E E3 3F to 39 8E 63 40
Dark Souls III 800700003804 to 000F00003804

It worked, thanks, I messed bcz was searching 8E E3 18 40 instead of 39 8E E3 3F, most likely screwed bcz of my English, but now I know how to do it in future.

@OnkelJupp Thank u so much )
Can you make 3840x1620 please? I didn't it.

Works just fine for me, changed 2 instances for 2560x1080

Glad you got it working, would have posted the exe somewhere if you didn't.

Hi,

can some one maybe help me out with HEX for 6040x1200?c would be appreciate

THX

Hi,

It worked partly for me (original steam version) but is there a hex code for the 3840 x 1080 available ? It is still not full screen because I´m using the hex code for the 3840 x 1600

thanks

Dumbass lazy devs...

Thanks guys for sharing a fix. Currently torrenting this now and will try it here shortly. Maybe if the devs ever pull their head out of their ass I'll buy the game.

can anybody help me? What should I put for the codex version and resolution 2560x1080?

I go through chapter 4 and even with the black bands

if someone can upload the exe I would appreciate it!

Just an update for some people.

Thanks to SAMI :

"7680/1440 = 5.333333333333333

Go to: https://www.h-schmidt.net/FloatConverter/IEEE754.html

Paste "5.333333333333333" there on "You entered" and press enter.

Then look the result of "Hexadecimal Representation"
The result would be 0x40aaaaab Ignore 0x,"

Hope that helps. It works but the text in the menus is too large and some text is off the screen.
So you should be able to calculate any resolution with that by dividing the width by the height.

So for 7680 x 1440 it would be :

1. Set in game res to 1920 x 1080
2. Search for 39 8E E3 3F (1920 x 1080 in hex)
3. Replace it with AB AA AA 40"

To get the correct Hex code for your resolution:

1. Set in game res to 1920 x 1080
2. Search for 39 8E E3 3F (1920 x 1080 in hex) using the Hxd Program
1. 7680/1440 = 5.3333333, Your Resolution width divided by height = Result
2. Go to : https://www.h-schmidt.net/FloatConverter/IEEE754.html
3. Enter : Your result in the "You entered" field.
4. Press Enter.
5. In the Hexadecimal Representation you will get a result eg "0x40aaaaab"
6. Remove 0x from the beginning.
7. This gives you: e.g. 40aaaaab which is 40 AA AA AB
8. REVERSE the result in 2's AB AA AA 40.
9. Replace 39 8E E3 3F with AB AA AA 40 in the HX program by pressing Ctrl + R, replace both occurances

It works.

0x40aaaaab

Hello, folks,
I'm afraid I have to beg too. Could someone please find out the specifications for 5292x1050. In spite of good instructions I am probably too stupid to find out for myself. Sorry !
Many thanks in advance
greetings

Your aspect ratio is 5.04
Follow the post just before yours and look for the hexadecimal value 39 8E E3 3F.
Then replace it with AE 47 A1 40.
You may find two occurencies of that hexadecimal values though. If i remember well, that's the first occurency.

Hi K4sh.
Thank you so much.
It really works great.
I have an eyefinity setup of three monitors each1680x1050

There are some artifacts on the picture, but they are only visible on the screen. In the game everything is propper

Your artefacts may reveal some frequencies flaws. Is your card overclocked ? If so, try to lower the frequencies. Even if the card is not overclocked.
This game really makes graphic cards have a hard time (temp rises high and quite quick).

3840x1080?

My bad, missed it from earlier.

I have tried to get this to work for 2 days. Change resolution in game, try windowed, no results. It cannot find the values to change at all. I have tried a fresh install and no results. Can anyone help? Post me an exe or something? The problem seems to be that no matter what resolution is set in game it reverts to a "custom" resolution which I have no idea on how to find in HxD. Thank you in advance.

I have the same problem as tcoster21, cannot find the values.
Damn this sucks so much every game you have to edit yourself I whish I would have never experienced 21:9 now I can´t get back

Edit: Instead of using HxD I used UltraEdit, found it and changed it.
It works now perhaps you can add this to your instructions.
Thx

Describe how to change '3440x1440; 26 B4 17 40 [instead of 8E E3 18 40] for 2560x1080; 9A 99 19 40 [instead of 8E E3 18 40] for 3840x1600). '

but I have a projector and screen 21: 9. My maximum resolution is 1920x800. knows someone how to change 39 E3 3F to 1920x800 (21: 9)

1920x800 is the same aspect ratio as 3840x1600. You go with 9A 99 19 40

_________________
you can buy me a coffee at ko-fi.com/rozziroxx

thanks. It's work

Can someone help me with the resolution 5120x1440?
I can not get it somehow.

I would need the hex code and the information which page to replace with it.

THX;)

39 8E 63 40

_________________
you can buy me a coffee at ko-fi.com/rozziroxx

Thx!!;) Work perfekt!

I want to share with @everyone an issue that has beset the WSGF over the last week or so. Google has decided that the files we host (exe files, patchers, etc.) are malware. Thus, they have flagged the entire WSGF as hosting and/or linking malware, which inhibits site access and search rankings.

Both the WSGF and our older media server (WSGF Media dot com) have been flagged. We have found a solution for our hosted files, via our friends at PC Gaming Wiki. However, we still have an issue with the forums linking to the old WSGF Media server.

There is no feasible way to go through the forums and edit the possible thousands of posts that reference the WSGF Media server. And there is absolutely no guarantee that Google won't ping some future post attachment and flag the entire site again.

The forums are much quieter today then they used to be, with just 1 or 2 active posts per day on average, on top of this we continue to have issues with bots or humans creating accounts to post spam. Additionally, the forums have hampered our ability to enable HTTPS and update the site to be more modern and mobile friendly.

The internet itself has also shifted, with sites like Reddit and services like Discord, YouTube and Twitch being where most discussion happens. Given all of the above we are exploring the idea of "archiving" the forums into their own domain so that everything could be read, but no new posts or accounts could be created. We would then direct all new discussion to a Reddit community and/or our Discord server, which we hope will make discussing and working on fixes more practical.

We are really at a crossroads where the forums have gone from being a minor or moderate inhibitor to growth of the WSGF, to now a major roadblock (thanks to Google). We need a road forward, and wanted to reach out to the community to socialize the issue and our ideas, and to get your feedback.

I'd love to hear your feedback in our Discord Server - https://discord.gg/FcVYWgh