Widescreen Gaming Forum
https://www.wsgf.org/phpBB3/

Help - need EDID info for Samsung B2330H
https://www.wsgf.org/phpBB3/viewtopic.php?f=72&t=21209		 Page 1 of 1
Author:  sparky1685 [ 31 Dec 2010, 00:47 ]
Post subject:  Help - need EDID info for Samsung B2330H
Hi, I'm hoping someone else with a Samsung B2330H monitor can post a copy of the EDID info for their screen (ideally for the DVI connection) using Monitor Asset Manager from http://www.entechtaiwan.com

Mine seems to have the EDID information entirely wrong - maximum resolution is given as 1280x1024 rather than 1920x1080. I'd like to try reflashing with the correct information.

In case anyone has found a similar problem, I've posted my current EDID info below. Interestingly, googling for "SAM0161" and "EDID" finds a few people have different models of Samsung monitor with exactly the same wrong EDID. I wonder if this could be some kind of fallback the monitor gives out if the EDID EEPROM gets corrupted...?

Mark

Monitor Asset Manager Report, generated 30/12/2010 (5.1.2600)
Copyright (c) 1995-2011, EnTech Taiwan.
---------------------------

Monitor #1 [Real-time 0x0021]
Model name............... SyncMaster
Manufacturer............. Samsung
Plug and Play ID......... SAM0161
Serial number............ n/a
Manufacture date......... 2004, ISO week 20
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 340 x 270 mm (17.1 in)
Power management......... Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.0
Display technology....... TFT
Controller............... Mstar 0x1000
Firmware revision........ 0.1
Firmware flags........... 0x00000001
Active power on time..... Not supported
Power consumption........ Not supported
Current frequency........ Not supported

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.330
Green chromaticity....... Gx 0.300 - Gy 0.600
Blue chromaticity........ Bx 0.150 - By 0.060
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 30-81kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 140MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1024x768p at 60Hz (5:4)
Modeline............... "1024x768" 65.000 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
Detailed timing #1....... 1280x1024p at 60Hz (5:4)
Modeline............... "1280x1024" 108.000 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 67Hz - Apple Mac II
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1280 x 1024p at 60Hz - VESA STD

Report information
Date generated........... 30/12/2010
Software revision........ 2.55.0.868
Data source.............. Real-time 0x0021
Operating system......... 5.1.2600.2.Service Pack 3

Raw data
00,FF,FF,FF,FF,FF,FF,00,4C,2D,61,01,00,00,00,00,14,0E,01,03,80,22,1B,78,2A,EE,91,A3,54,4C,99,26,
0F,50,54,BF,EF,00,81,80,01,01,01,01,01,01,01,01,01,01,01,01,01,01,64,19,00,40,41,00,26,30,18,88,
36,00,52,0E,11,00,00,18,30,2A,00,98,51,00,2A,40,30,70,13,00,52,0E,11,00,00,1E,00,00,00,FD,00,38,
4B,1E,51,0E,00,0A,20,20,20,20,20,20,00,00,00,FC,00,53,79,6E,63,4D,61,73,74,65,72,0A,20,20,00,FD

---------------------------
Author:  dtn33 [ 06 Jan 2011, 18:33 ]
Post subject:  Re: Help - need EDID info for Samsung B2330H
oh dear...i have samsung t190 its a 19" wide monitor and i have EXACTLY the same wrong edid :x fucking samsung need to wake up
Author:  sparky1685 [ 06 Jan 2011, 22:10 ]
Post subject:  Re: Help - need EDID info for Samsung B2330H
Yeah, it's weird that this same wrong EDID seems to pop up on different Samsung monitors - maybe they pay a guy at the factory to drop one wrong chip in every production run :)

The Samsung monitor drivers for my screen do seem to add a line for the correct native resolution to the Windows registry. However since my screen had the wrong model code (SAM0161 instead of SAM064A) in the EDID, plug and play never detected my monitor and never fully installed the correct drivers (running the .exe file to install the Samsung drivers seems to unpack them, but they won't install for the monitor until it's detected correctly).

Nobody answered my request for a copy of the correct EDID for my monitor, so I ended up writing my own and manually changing the EDID on the monitor, as described in this post:
http://www.widescreengamingforum.com/forum/viewtopic.php?f=9&t=21747

I'd suggest that you download the free version of Powerstrip, and see whether that lets you force the monitor to its native resolution. If so, you might find that a good enough solution. Once you've done this, Powerstrip will also give you the timing info you'd need to create your own EDID in Phoenix EDID Designer, which you'd need if you want to follow the (risky) path of reflashing the EDID in the monitor.

Mark
Author:  dtn33 [ 06 Jan 2011, 23:03 ]
Post subject:  Re: Help - need EDID info for Samsung B2330H
yeah i actually searched and found the correct complete EDID as people had wrong EDIDs that belong to my monitor (model SAM03E1) i flashed it but i still think the monitor is recognized as a 5:4 monitor as the scaling seems wrong, as i explained in my topic here http://www.widescreengamingforum.com/forum/viewtopic.php?f=9&t=21781

i'm a bit angry right now cause we have to go through all this because samsung doesnt check their products prior to distribution
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/