| Widescreen Gaming Forum https://www.wsgf.org/phpBB3/ |
|
| Ghetto set up for testing https://www.wsgf.org/phpBB3/viewtopic.php?f=68&t=23076 |
Page 1 of 2 |
| Author: | Darth Yoda [ 20 Nov 2011, 01:49 ] |
| Post subject: | Ghetto set up for testing |
Hi guys, Need a little info please. I have two 4870hds (crossfire) running on windows XP pro SP3 on a Gigabyte EP45-UD3P mobo. I would like to set up three monitors to see if I like it. My center monitor is a Dell2007 FP and I'll probably use two CRT's at first for the sides. What software or other hardware will I need to get this going? It will be temporary until I can get three matching monitors. I play Cod4 mostly and believe the screen settings can be set properly in game. What else would need to be done? Thanks in advance for your help. |
|
| Author: | c69 [ 20 Nov 2011, 02:45 ] |
| Post subject: | You will need a DisplayPort |
You will need a DisplayPort adapter. One of the monitors needs to use the Displayport out on your graphics card. I recommend getting an analog one on ebay ($10). Displyport to VGA works great; there are many problems reported with the digital DisplayPort to HDMI and DVI. You will probably also need various adapters to go from your video cards to the vga inputs of your crts. You can get DVI-I to VGA (the dvi signal includes the analog signal), but you may need one monitor with a digital input depending on the ports on your card. Beyond that, all the monitors should run the same resolution. |
|
| Author: | Haldi [ 20 Nov 2011, 15:48 ] |
| Post subject: | With 2 Cards and Crossfire |
With 2 Cards and Crossfire you're not forced to put all 3 screens on one card ? It should be possible to use 2x DVI Port on first card and 1x DVI port on 2nd Card. But i'm not sure if you can setup a Eyefinity System with different monitors. (what exactly are CRT's ?) |
|
| Author: | c69 [ 20 Nov 2011, 18:02 ] |
| Post subject: | Haldi wrote:With 2 Cards and |
With 2 Cards and Crossfire you're not forced to put all 3 screens on one card ? All the monitors have to be connected to one card. CRt is a cathode ray tube, one of those big boxy monitors from yesteryear. |
|
| Author: | Darth Yoda [ 20 Nov 2011, 21:28 ] |
| Post subject: | So even tho I've got four |
So even tho I've got four video ports I have to have the monitors connected to one card? Dog buggers. Ebay again! A friend has a Y-connector that supports two monitors off a single port. Is that the adapter your talking about? Or the dongle that goes from old style CRT to modern DVI (like what came with the cards)? Thanks for the quick replies guys. |
|
| Author: | tepescovir [ 21 Nov 2011, 01:03 ] |
| Post subject: | will it work with xp? |
will it work with xp? |
|
| Author: | ugzz [ 21 Nov 2011, 04:24 ] |
| Post subject: | Y adapter is not gonna |
Y adapter is not gonna work. and that dell 2007fp is a 1600 x 1200 monitor. BOTH of your other monitors need to be 1600x1200 as well, or else everythings going to get all wonked out |
|
| Author: | Darth Yoda [ 22 Nov 2011, 03:54 ] |
| Post subject: | Hello again. I got my 2 |
Hello again. I got my 2 4870hd's to show three monitors. Kinda fiddled with them to get them lined up. They look OK but not great but I'm happy for now. I have moved icons from screen to screen and ran programs off each one. Now comes the question.How do I stretch CoD4 across all three at 1024 X 768? I tried 3072 X 768 in my config file in game but no luck. The ingame resolutions show just the basic sizes. Do I need the Fixer? Again I appreciate all your help and prompt replies. Cheers, Darth. |
|
| Author: | ugzz [ 22 Nov 2011, 16:37 ] |
| Post subject: | sounds like you have your |
sounds like you have your monitors setup as individual resolutions. you have to configure your drivers to have "one" resolution. i dont have an ati card that supports eyefinity so i cant help you there, but i know in the monitor config is where you need to be. you need to get 1x resolution of whatever res you want to game at, make your desktop res match that, then configure the game for that res and go. you mentioned cod, youll have to check out the detailed report on cod to get it looking right. click games from the top and do a search on duty (hehe, i said duty), choose your game and read the report to see how to get it going |
|
| Author: | Darth Yoda [ 23 Nov 2011, 03:03 ] |
| Post subject: | Soft th no video |
I have everything setup hardware-wise. Showing three monitors semi-correctly. When I start CoD4 I get the SoftTH logos on the side monitors and black screen on the middle. I'm looking online now for a fix. Have read a couple of how to's but they were pretty vague. My setup is 1024X 768 on my CRT sides (but might get changed) and 1600X 1200 on my Dell 2007 middle. SoftTh shows 3072X768 on V1.08. I don't have any bezel correction right now. Any ideas as to getting CoD4 to play? Thanks again. I must say you guys are pretty fast on the replies. You get paid a comission? LOL |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|