Widescreen Gaming Forum

[-noun] Web community dedicated to ensuring PC games run properly on your tablet, netbook, personal computer, HDTV and multi-monitor gaming rig.
It is currently 29 Mar 2024, 14:51

All times are UTC [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: 5760x1080 problem
PostPosted: 17 Dec 2011, 15:50 
Offline

Joined: 23 May 2010, 17:40
Posts: 9
I have the TH2GO Digital Edition running at 5760x1080 on 3 x ACO e2243Fw 21,5" screens with the latest firmware, Powerdesk utility and video driver.
My problem is that the graphics in each monitor do not fill out the frame. And this gives me 3 seperature pictures when I use my FSX.
If I use another resolution 3840 x 1024 the monitors are filled out with graphics. But the picture seem to be stretched too much in the horizontal direction.

It is not possible for me to adjust the problem via the menu on each monitor, and it's probably because Matrox TH2GO has taken over the control of the three monitors.
I will be gratefull for an advice to fix this problem.

/Lars


Top
 Profile  
 


PostPosted: 17 Dec 2011, 16:23 
Offline
Insiders
Insiders
User avatar

Joined: 20 Aug 2009, 04:20
Posts: 2351
Location: Virginia
Sounds like your monitors are having a problem running at 50Hz or you're using VGA and need to hit the auto-adjust button on your lcds.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |


Top
 Profile  
 
PostPosted: 17 Dec 2011, 20:54 
Offline

Joined: 23 May 2010, 17:40
Posts: 9
Can you explain how I fix the problem. Where do I see if I'm running VGA?
I've tried the local menu on my monitors but it do not think I am able to adjust the widht of the picture because this function is set to "Wide" and it is not possible to adjust it (it is greyed out).

When I use only one of my monitors I get a fine filled out picture in 1920x1080. So my monitors are capable to do 1920x1080 each. Can Matrox TH2GO (Digital) handle this?

/Lars


Top
 Profile  
 
PostPosted: 18 Dec 2011, 22:53 
Offline

Joined: 23 May 2010, 17:40
Posts: 9
It looks like the combination of 3 AOC e2243Fw 21,5" LED monitors and TH2GO Digital Edition does not work properly together. The only resolution that can result in 3 pictures connected - edge by edge - is 3840x1050, but it looks stretched and too wide - if you understand.

Propably the best looking resolution is 5040x1050, but this does nor work on my combination.

So my question is:

1: can you give me a link to a guide that solves this problem? OR

2: can you advice a good combination that delivers a fine coherent picture for my FSX. What Matrox device ? What kind of monitors?

/Lars


Top
 Profile  
 
PostPosted: 20 Dec 2011, 18:44 
Offline

Joined: 23 May 2010, 17:40
Posts: 9
I THOUGHT THIS FORUM WAS MONITORED BY OFFICIAL MATROX.
SINCE I'M NOT ABLE TO GET HELP HERE COULD I PLEASE GET A TELEPHONE OR E-MAIL TO MATROX FOR SOME HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Top
 Profile  
 
PostPosted: 20 Dec 2011, 18:51 
Offline
Editors
Editors
User avatar

Joined: 06 Nov 2008, 01:08
Posts: 1898
http://www.matrox.com/graphics/en/support/contact/


Top
 Profile  
 
PostPosted: 21 Dec 2011, 20:58 
Offline

Joined: 23 May 2010, 17:40
Posts: 9
Finaly I have managed to find a setup with my TH2GO and 3 AOC e2243Fw 21,5" monitors.
I have tried 3840x1024 because my "Matrox PowerDesk" program was recommending this resolution but in this solution with my monitors everything was too wide.

The 4320x900 solution gives a fine picture but leves two problems (always problems.......)
1) FSX only works in full screen mode with this 4320x900 resolution. How can this problem be fixed?
2) When in the cockpit and zooming out to 0.30 the panel and instruments are seen VERY CLOSE. How can this problem be fixed (if possible)?

Looking forward to a solution :Thinking:

Best Regards

Lars


PS: Nivida GeForce GTX 550Ti


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  




Powered by phpBB® Forum Software © phpBB Group