| Widescreen Gaming Forum https://www.wsgf.org/phpBB3/ |
|
| Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 https://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=21628 |
Page 1 of 1 |
| Author: | icemanmelb [ 05 Mar 2011, 02:16 ] |
| Post subject: | Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
Guys, I've just noticed on the Matrox Website that it now supports 5760 x 1080 resolution at 50hz. Since I owned 2 x LG Flatron E2340, I was wondering if anyone can give me hints on how to find out if it works at 50 hz before I get a third one... I have the TripleHead2Go DisplayPort running of an Nvidia GeForce GTX 260M According to the Matrox Website http://www.matrox.com/graphics/en/products/gxm/th2go/ Supports a maximum resolution of 5760x1080 (3x 1920x1080)1, 2 across three monitors; displays attached to TripleHead2Go must run at the same resolution Thanks |
|
| Author: | scavvenjahh [ 05 Mar 2011, 13:17 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
Try to create a custom resolution of 1920x1080, 50 Hz in Nvidia Control Panel: Display > Change resolution > Customize... > Create Custom Resolution. |
|
| Author: | icemanmelb [ 07 Mar 2011, 13:29 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
Try to create a custom resolution of 1920x1080, 50 Hz in Nvidia Control Panel: Display > Change resolution > Customize... > Create Custom Resolution. it's impossible to get 50 Hz in Nvida... I give up and will ring Matrox instead. thanks |
|
| Author: | scavvenjahh [ 10 Mar 2011, 22:50 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
FYI my own monitor (Acer GD245hq) passes the test no problem, so this should be a valid method. I hope Matrox can help you out with some custom refresh rate trick or sth. |
|
| Author: | kiwi53 [ 14 Mar 2011, 19:33 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
it's impossible to get 50 Hz in Nvida... I'm running 5760x1080 with 3 x 24" Samsung SyncMaster B2440 screens, Nvidia GTX480 with latest driver and TH2GO Digital Edition with latest firmware. I created a custom 5760x1080 resolution in the Nvidia Control Panel using 57hz before installing the Matrox PowerDesk software. I have tested this with XP32, XP64 and Win7 Ultimate 32. |
|
| Author: | suiken_2mieu [ 28 Mar 2011, 18:17 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
You should connect one of your monitors to one of the ports on the card (by passing the TH2Go). Then try doing the custom resolution on that monitor. |
|
| Author: | Matthew [ 30 Mar 2011, 09:31 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
it's impossible to get 50 Hz in Nvida... I had no problem with my Nvidia GeForce GTS 450 getting 5760x1080@50Hz. I didnt have to do anything besides select the resolution in the powerdesk software. although i purchased my monitors because they were advertized as allowing a 50Hz refresh rate. if you can get a single monitor working at 1080P@50Hz three should run fine. |
|
| Author: | Guilherme [ 08 Apr 2011, 19:15 ] |
| Post subject: | Re: Newbie Q: Is anyone using TH2Go with 3 x 1920 x 1080 |
Hello, I also want to buy 3 monitors for 3x 1920x1080 with TH2GO, can we make a list of the monitors that work with this resolution @50hz? I have a 4870X2. Thanks |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|