Widescreen Gaming Forum

Hi Guys,

I am looking to upgrade to a eyefinity setup and im slightly confused if this will work successfully.

Equipment:

GPU: R9 290x & R9 295x2 (trifire)
Monitor: QNIX QX2710 (1440p 120hz) - DVI only.

I have not bought the other 2 monitors (I am probably going to buy 3 identical.)

So the setup im thinking is using the 2 x DVI-DL ports in the 290x and 1x DVI-DL port in the 295x2. I have done a lot of reading and I have seen a lot of people having issues with the 290x and getting third monitor working.

Can someone give me some advise on the setup above (will it work? if not - how to get a setup working?)

All of your video outputs have got to come from a single card for Eyefinity to work and you must use at least one displayport connection for Eyefinity to work. If none of your monitors support displayport, you'll need at least one active displayport adapter.

+1 what Birfurk8 said.

Note, displayport adapters come in both passive and active, for a 3rd display you must use an active adapter.

_________________
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |

Great - Thanks for the replies.

So one question, if I use an active displayport adapter - do I loose the 120hz on that monitor?

Thanks in adavnce

This is old Knowledge, the new 290 cards should support 2x DVI and 1x HDMI.
Sadly i have no Monitory (only have 5 laying around...) with HDMI input -.- i use a HDMI cable to the Denon AVR-x1000 and from the denen Out via HDMI->DVI adapter to my Monitor.

There are Displayport to DualLink-DVI Adapters available which can do 120hz at 1920x1080

_________________
We gonna send it to outa space!

Hello Haldi,

Thanks for the input - that is my concern. Im trying to run 1440p at 120hz , and im worried the adapters wont do that.

hmmm is anyone here running 1440p 120hz eyefinity?

Yeh this is tricky - and I cant get any clear picture if what I am trying to achieve will work.

120hz - 1440p - 3 monitor eyefinity.

It seems like you can get 120hz on 1080p as you stated. But I dont think the active DP -> DVI adaptors can do both 1440p & 120hz..

hmmm more reading is needed

1440p (2560x1440) @ 120hz requires 10.62Gbit/s of bandwidth (per monitor), which only Displport 1.2 cables and connectors can handle, DVI dual-link is limited to 7.92GBit/s and HDMI 1.4c is limited to 8.16GBit/s.

If the monitors support this resolution and refresh rate then I suspect that they have a displayport input.

Source / bandwidth calc

So in order to achieve 3x 2560x1440@120hz, would require a GPU with 3x Displaport 1.2 outputs (all AMD cards from the Radeon 6xxx series up, support DP1.2)

This thread may be of some use to you, to help find a GPU that has 3x DP1.2 outputs. - http://www.wsgf.org/forums/viewtopic.php?f=66&t=24334

_________________
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |

I think the normal R9-295X2 does have 4x miniDP and a DVI

_________________
We gonna send it to outa space!