It more then just a rumor. check out all the posts at
http://www.widescreengamingforum.com/forum/viewtopic.php?f=64&t=17468

Also, I bought one of the vga adapters thinking that I was going to get another bum active adapter. Turned out the active one I got works great. I still have the DP > VGA in my office closet, un opened.



-Tanshin

vga has no limit for resolution, it's just that at higher resolutions you will lose detail. That's why we have dvi and newer ports that can carry a higher detailed image at the upper resolution. You should be a-ok for that resolution. in that other thread, they give links to the vga adapter that is confirmed to work.



-Tanshin

If you are planning this for Eyefinity, or a three monitor set-up. whith three different outputs, you must use an active adapter.

Here's the reason. Most video cards are designed for the connection of a maximum of 2 monitors. These Video cards contain two timing circuits for syncing the timings of the video card's output and the monitor connected.

Displayport does not require the timing signal that is required for say a DVI connection, but once converted to VGA/DVI the monitor connected, does require some form of timing signal.

If you have only two monitors connected... great.. your video card can produce 2 timing signals for the two monitors, regardless of where your connections are. A non-active display port converter can carry the timing signal, when it is one of only two connections to the video card. Add a third monitor, and the video card does not have the ability to provide this third timing signal, and a seperate video output.

As mentioned before, a displayport connection to a displayport input on a monitor, does not require the timing signal. Using a non-active adapter to convert displayport to DVI/VGA in this senario, does not add a timing signal, that the monitor can sync with. Yotr other two displays (presumably connected via DVI/HDMI/VGA, are already using the timing signals the Vid card is capable of. The active adapter does just that... It creates a timing signal for the third monitor that has be converted to another input type, other than displayport.