Widescreen Gaming Forum

If you are having difficulty in the game to change your video options, here is how to change the setting outside of the game:

C:Users(user name)DocumentsDiablo IIID3Prefs.txt

DisplayModeWindowMode "2"
DisplayModeWidth "5760"
DisplayModeHeight "1080"

Bezel Correction resolutions are supported but, this has to be set to your desktop resolution or it will not work. This will enable the Fullscreen Windowed solution all ready found in the Beta.

_________________
Azza Fusion 4000 Liquid Cooled Full/Mini-ITX Tower - AMD Ryzen 1700x CPU - Tt Water 3.0 Ultimate CPU Cooler - ASUS ROG Crosshair VI Extreme - 2x EVGA GTX 980 in SLI - Geil 16GB - Klipsch 5.1 THX Speakers - Vertex 4 128GB SSD, Sandisk 256GB SSD, Samsung 512GB 850 PRO SSD, WD Black 320GB & Two times Toshiba 5TB (one for Games and the other for Storage) - Logitech G502 - Corsair K65 RGB - Logitech G13 - Win10 Pro 64bit - 2-over-1 Viewsonic VA2448M 24" (2x 1920x1080 Secondary) & Samsung CHG90 Series Curved 49" (3840x1080) - Ergotech Monitor Stand - Shout out to WSGF for the upgrade on my stand!

If you are having difficulty in the game to change your video options, here is how to change the setting outside of the game:

C:Users(user name)DocumentsDiablo IIID3Prefs.txt

DisplayModeWindowMode "2"
DisplayModeWidth "5760"
DisplayModeHeight "1080"

Bezel Correction resolutions are supported but, this has to be set to your desktop resolution or it will not work. This will enable the Fullscreen Windowed solution all ready found in the Beta.

I've been able to run the game in 3x1 landscape, but has anyone tried Kayden's solution for 3x1 portrait? I tried it yesterday, but once I had all the monitors arranged and eyefinity enabled, when I launched D3 the game would not allow me to change the resolution (set at 1280x720) or the display mode (windowed only). Typically there are drop-down menus for both of these options (resolution and display mode), but when I was in 3x1 portait D3 disabled both drop-down menus.

I think the game is pretty cool in landscape, but would be even better in portrait, if I could figure out how to get it to go to "full screen windowed mode" when I've got the 3x1 portrait eyefinity setup enabled...

[quote]If you are having difficulty in the game to change your video options, here is how to change the setting outside of the game:

C:Users(user name)DocumentsDiablo IIID3Prefs.txt

DisplayModeWindowMode "2"
DisplayModeWidth "5760"
DisplayModeHeight "1080"

Bezel Correction resolutions are supported but, this has to be set to your desktop resolution or it will not work. This will enable the Fullscreen Windowed solution all ready found in the Beta.

I've been able to run the game in 3x1 landscape, but has anyone tried Kayden's solution for 3x1 portrait? I tried it yesterday, but once I had all the monitors arranged and eyefinity enabled, when I launched D3 the game would not allow me to change the resolution (set at 1280x720) or the display mode (windowed only). Typically there are drop-down menus for both of these options (resolution and display mode), but when I was in 3x1 portait D3 disabled both drop-down menus.

I think the game is pretty cool in landscape, but would be even better in portrait, if I could figure out how to get it to go to "full screen windowed mode" when I've got the 3x1 portrait eyefinity setup enabled...


I haven't tried this game in portrait mode but if your having trouble, on the DR page there is a fix from Helifax that might resolve that for you. You just run it in fullscreen mode at max res, enable the fix, alt tab out, then go back in and it should work. If it doesn't go to the following link below and let Helifax know in that thread. Cheers.

http://www.wsgf.org/forum/9066/diablo-three

_________________
Azza Fusion 4000 Liquid Cooled Full/Mini-ITX Tower - AMD Ryzen 1700x CPU - Tt Water 3.0 Ultimate CPU Cooler - ASUS ROG Crosshair VI Extreme - 2x EVGA GTX 980 in SLI - Geil 16GB - Klipsch 5.1 THX Speakers - Vertex 4 128GB SSD, Sandisk 256GB SSD, Samsung 512GB 850 PRO SSD, WD Black 320GB & Two times Toshiba 5TB (one for Games and the other for Storage) - Logitech G502 - Corsair K65 RGB - Logitech G13 - Win10 Pro 64bit - 2-over-1 Viewsonic VA2448M 24" (2x 1920x1080 Secondary) & Samsung CHG90 Series Curved 49" (3840x1080) - Ergotech Monitor Stand - Shout out to WSGF for the upgrade on my stand!

Good job on getting it done.

Currently using HaYDeN's Flawless Widescreen utility and it works like a charm.

I have only one thing to "complain" about...

In full Eyefinity (6048x1200) it's a bit annoying to see your inventory on the far right and lore/follower inventory etc etc on the far left.

The only thing that would make any solution perfect would be if we could make all in-game stuff appear on the center screen somehow.
I'm no programmer at all so I wouldn't have a clue how to accomplish this but following this fine website's history I bet there's more than a few who are more than capable of fixing it (if at all possible to fix).

Thanks for an awesome site !

// DrAngst (a.k.a Lavandel).

i am attempting to use Flawless Widescreen but am unable to set my game to full screen mode in a 3x1 portrait setup. the ingame toggle is disabled and changing the D3Prefs file has no effect. any suggestions??

edit: running at 3600x1920, which is not in the list of tested resolutions :s

Flawless Widescreen doesn't work because the game is a higher version than the one supported by Flawless Widescreen.

I find no other way of contacting HaYDeN other than these fine forum so I hope he reads this soonish. I really miss my eyefinity experience and I don't want to run in a borderless window since my Crossfire won't be running unless it's fullscreen.

Is the version of the game the same version in both EU and US? It should be right?

Anyone still playing this game? Or about to play it again in light of the new expansion coming out?

I just wanted to see if Helifax's fix works for anyone. If I set it to fullscreen it doesn't work. If I set it to Borderless, the game runs like crap, but after I enable the fix, it's smooth as butter. I'd play in borderless, but I want the Sli power to enable SGSSAA.

_________________
起死回生 (kishi kaisei) Wake from death and return to life..

EDIT: Actually it does work, I was trying with the beta of RoS and it wasn't working

_________________
起死回生 (kishi kaisei) Wake from death and return to life..

2.0.1 Update broke the Flawless Widescreen fix. Doesn't work anymore

_________________
My Blog || YouTube Channel || Twitch Stream
My PC || Game Screenshots Archive

Yeah I can confirm this too

Updated for Reaper of Souls goodness.

Will be released in the next few hours.

_________________
Resident Jester - Flawless Widescreen - Widescreen gaming the way it should be.
[Steam Profile]

Want to keep Flawless Widescreen alive? Donate Here

Nice work

Awesome Hayden, as always!

_________________
My Blog || YouTube Channel || Twitch Stream
My PC || Game Screenshots Archive

nevermind... multi monitor works fine with the RoS expansion unlocked.

HaYDen, any change you can center the HUD with FWS ?

Can anyone help me with a problem? every time I start D3 it is in window mode, I can drag to resize the screen and it plays but will not fill the screen. I can edit the ini perfs file and it makes no difference, changed the file to read only... same thing Flawless widescreen and Widescreen fixer have no affect. The options are greyed out in the options menu even if I delete ini file I cant change the options for the window mode or resolution

_________________
EVGA 1300
EVGA X-99 CLASSIFIED LGA2011-v3
I7 5930K @ 4.0
Corsair H90 CPU Cooler
WD Black2TB +1 WD blue 1 TB 3.0 .
Plextor px-G128M6E 128 GB (O.S.)
64 GB HyperX Fury DDR4 2133
2 EVGA Titan x Hydro Copper SLI (Maxwell)
Creative Recon 3D 5.1 onboard sound
64 Bit Windows 10 Pro.
Corsair Air 540
Razor Death Stalker Chroma Keyboard
Razor Deathadder Chroma Mouse
#1 Acer Predator 3440 x 1440
#2 ACER V246HL
#3&4 HP LA1905