Hey thanks for the warm welcome
So here some pics of the desk in the old configuration
Most of the building itself done, just some painting and finishing touches
Top view of the desk surface, left of the raised section integrated 4-port usb hub and at the back left a power socket. Right side convenient storage compartiment
The table stands on the 2 old 19 inch monitors are located underneath the raised section
A bigger view picture. My selfmade deskchair, built from some salvaged parts. A reupholstered '74 chevrolet chevelle bucket seat and a rotating base modified with legs and wheels.
The whole consists of 4 parts. Left side rack, right side leg, top desk and raised section that sits loose on the desk surface. (oh Yeah and a Ikea drawer storage unit :p )
Now with the new setup it didn't work out so I have to do some modifications to it. What I already made is monitor stand for the 3 monitors It just slides in at the back of the desk and has a horizontal bar (with the ends angled towards me) on which the monitors hang.
Sadly enough I made a measuring mistake and I'm 0.5 cm too low to slide the raised section underneath the monitors. So I have to rework the mounts on the monitors themselves so that they sit higher. The other thing I still have to do is the left stand/rack. The top section where the case sits has to be lowered so the bottom of the left monitor clears the top of my case. Now my case sits on the ground. But just haven't had the courage yet to tear the whole thing apart again and drag it downstairs to work on it. Will do that soon.
Would have wanted to put up a picture of the setup as it currently is, but don't seem to find my camera. When I tear it apart and build it up again I will take some pictures.
That's it so far, will keep you guys updated